Draper DC15/30 Manual

Draper Dørlukker DC15/30

Læs gratis den danske manual til Draper DC15/30 (8 sider) i kategorien Dørlukker. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Draper DC15/30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the product, which should be kept with the product.

This manual describes the purpose for which this product has been designed and contains all the necessary information to ensure its

correct and safe use.We recommend that this manual is read before any operation of the product, before performing any kind of

adjustment to the product, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it

will ensure both product and operator safety, together with longer life of the product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous

improvement determines the right to make modifications without prior warning.

DOOR CLOSER

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO

ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.

■ STOCK No.62894 ■ PART No.DC15/30

06/2000

- 2 -

■STOCK No.62894 ■PART No.DC15/30

OPENING TO 120°

■DIMENSION A = 95mm

OPENING FROM 120° TO 180°

■DIMENSION A = 65mm

INSTALLATION INSTRUCTIONS FOR

REGULAR ARM (PULL SIDE) MOUNTING

This installation process covers regular arm installa-

tions up to 180° openings.

1. Select the door opening angle and use the dimen-

sions shown opposite. Mark four holes on the door

for the door closer and two holes on the frame for

the arm shoe.

2. Drill 4mmØ pilot holes in the door and frame for the

fixings supplied.

3. Fix the forearm/arm shoe assembly to the door

frame using the fixings supplied.

4. Attach the closer to the door using the fixings sup-

plied.

Note: The speed adjusting valve must be positioned

towards the hinged edge of the door.

5. Install the main arm onto the top pinion shaft, per-

pendicular to the door as illustrated below. Tightly

secure it in place using the screw/washer assembly

supplied.

6. Adjust the length of the forearm so that it is perpen-

dicular to the door frame when assembled to pre-

loaded main arm (see ‘top view’ illustration below).

Secure the forearm to the main arm using the

screw/washer assembly provided.

7. Snap the pinion cap over the pinion shaft at the bot-

tom of the closer unit.

8. Adjust the closing speed of the door using the pro-

cedure detailed on page 5.

REGULAR ARM INSTALLATION

Closer installs on PULL/HINGE side of door

Illustrated

Left Hand Door-LH or

Right Hand Reverse-RHR

TYPICAL TOP VIEW

INSTALLATION

Produkt Specifikationer

Mærke:	Draper
Kategori:	Dørlukker
Model:	DC15/30

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper DC15/30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Dørlukker Draper Manualer

Draper DC40/65 Manual

4 Januar 2024

Draper DC15/30 Manual

29 April 2023

Dørlukker Manualer

Nyeste Dørlukker Manualer

ASSA ABLOY 84883 Manual

15 April 2024

Stanley D4551 Manual

19 Marts 2024

Dorma BTS 84 Manual

9 December 2023

Burg Wächter TS 4000 V Manual

7 September 2023

25 August 2023

1 August 2023

17 Maj 2023

3 Februar 2023

Burg Wächter GTS 514 Manual

1 December 2022

AXA 7507 Manual

28 November 2022