Draper Expert 95314 Manual

Draper Boremaskine Expert 95314

Læs gratis den danske manual til Draper Expert 95314 (24 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Draper Expert 95314, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

These instructions accompanying the product are the original instructions. This document is part of the product,

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these

instructions before assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been

designed, and contains all the necessary information to ensure its correct and safe use. By following all the

general safety instructions contained in this manual, it will ensure both product and operator safety, together

with longer life of the product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper

Tools policy of continuous improvement determines the right to make modifications without prior warning.

Stock No.95314 shown

95314 / 95092



230V 16 SPEED

BENCH/FLOOR STANDING

DRILL

1. TITLE PAGE

1.1 INTRODUCTION:

USER MANUAL FOR: 230V 16 Speed Bench/Floor Standing Drill

Stock No’s: 95314 & 95092

Part No’s: BD650/16E & DP650/16E

As our user manuals are continually updated, users should make sure that they use

the very latest version.

Downloads are available from: http://drapertools.com/manuals

Draper Tools Limited Draper Tools Limited

Hursley Road Oude Graaf 8

Chandler’s Ford 6002 NL

Eastleigh WEERT

Hampshire Netherlands

SO53 1YF

Website: drapertools.com

Product Helpline: +44 (0) 23 8049 4344

General Fax: +44 (0) 23 8026 0784

1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:

WARNING! – Information that draws attention to the risk of injury or death.

CAUTION! – Information that draws attention to the risk of damage to the product or

surroundings.

Permission is granted to reproduce this publication for personal and educational use

only. Commercial copying, redistribution, hiring or lending is prohibited.

No part of this publication may be stored in a retrieval system or transmitted in any

other form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

1.2 REVISIONS:

Date first published November 2018.

Date first revised: April 2022.

2. CONTENTS

1. TITLE PAGE

1.1 INTRODUCTION..........................................................................................................2

1.2 REVISION HISTORY ..................................................................................................2

1.3 UNDERSTANDING THIS MANUAL .............................................................................2

1.4 COPYRIGHT NOTICE .................................................................................................2

2. CONTENTS

2.1 CONTENTS.................................................................................................................. 3

3. WARRANTY

3.1 WARRANTY.................................................................................................................4

4. INTRODUCTION

4.1 SCOPE.........................................................................................................................5

4.2 SPECIFICATION ..........................................................................................................5

4.3 HANDLING AND STORAGE........................................................................................ 5

5. HEALTH AND SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ............................6-7

5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR DRILLS............................................... 8

5.3 CONNECTION TO THE POWER SUPPLY ................................................................. 9

6. TECHNICAL DESCRIPTION

6.1 IDENTIFICATION ....................................................................................................... 10

7. UNPACKING AND CHECKING

7.1 PACKAGING .............................................................................................................. 11

7.2 WHAT’S IN THE BOX?............................................................................................... 11

8. PREPARING THE DRILL

8.1 BASE TO COLUMN ...................................................................................................12

8.2 TABLE BRACKET ..................................................................................................... 12

8.3 TABLE ........................................................................................................................13

8.4 HEADSTOCK .............................................................................................................13

8.5 PLUNGE HANDLES................................................................................................... 13

8.6 CHUCK AND ARBOR................................................................................................. 14

8.7 CHUCK GUARD......................................................................................................... 14

8.8 BENCH/FLOOR MOUNTING.....................................................................................14

9. SETTING THE DRILL

9.1 SPINDLE SPEED ADJUSTMENT..............................................................................15

9.2 BRILL BIT INSTALLATION/REPLACEMENT.............................................................16

9.3 NO-VOLT SWITCH..................................................................................................... 16

9.4 WORK TABLE ADJUSTMENT...................................................................................17

9.5 GENERAL DRILLING................................................................................................. 18

9.6 DUST AND SWARF ................................................................................................... 18

10. TROUBLESHOOTING

10.1 TROUBLESHOOTING ...............................................................................................19

11. MAINTENANCE

11.1 MAINTENANCE ......................................................................................................... 20

11.2 ARBOR REMOVAL ....................................................................................................20

12. OPTIONAL ACCESSORIES

12.1 OPTIONAL ACCESSORIES....................................................................................... 21

13. EXPLANATION OF SYMBOLS

13.1 EXPLANATION OF SYMBOLS ..................................................................................22

14. DISPOSAL

14.1 DISPOSAL..................................................................................................................23

DECLARATION OF CONFORMITY ..............................................................................ENCLOSED

- 3 -

Produkt Specifikationer

Mærke:	Draper
Kategori:	Boremaskine
Model:	Expert 95314

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper Expert 95314 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Draper Manualer

Draper Expert 95092 Manual

1 Oktober 2025

Draper Expert 14258 Manual

1 Oktober 2025

Draper Storm Force 38255 Manual

1 Oktober 2025

Draper 54488 Manual

1 Oktober 2025

Draper Storm Force 65138 Manual

24 September 2025

Draper 83811 Manual

23 September 2025

Draper 70257 Manual

8 Juni 2025

Draper 56382 Manual

8 Juni 2025

Draper Storm Force 89523 Manual

8 Juni 2025

Draper Storm Force 56360 Manual

8 Juni 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

NEO Tools 14-514 Manual

15 Oktober 2025

Alpha Tools BAS 18 Manual

12 Oktober 2025

Alpha Tools ASE 18/2 G Manual

12 Oktober 2025

Alpha Tools BAS 18-2/1H Manual

12 Oktober 2025

Alpha Tools ASE 14.4-1/2 Manual

12 Oktober 2025

Alpha Tools SB 401/1 Manual

12 Oktober 2025

Alpha Tools BA 12 Manual

12 Oktober 2025

Alpha Tools AS 12 Manual

12 Oktober 2025

Alpha Tools ABM 500 E Manual

12 Oktober 2025

Bosch GSB 20-2 Professional Manual

12 Oktober 2025