Dürkopp Adler 550-12-26 Manual

Dürkopp Adler Symaskine 550-12-26

Læs gratis den danske manual til Dürkopp Adler 550-12-26 (23 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Dürkopp Adler 550-12-26, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/23

Contents: Page:

Preface and General Safety Information

Part 1: Operating Instructions cl. 550-12-23; -24; -26

1. Product Description

1.1 Brief Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Designated Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Lc Noise Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 Subclasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.5 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.6 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2. Operating Elements and their Function

2.1 Elements on the Sewing Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Elements on the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Operating the Controls

3.1 Manual Sewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2 Sewing with a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2.1 Model Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2.2 Sewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.3 Partial Program Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4 Changing Crimping Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4.1 Changing All Crimping Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4.2 Changing a Single Crimping Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.5 Editing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.5.1 Altering a Step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.5.2 Inserting a Step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.5.3 Deleting a Step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.6 Deleting a Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.7 Generating a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4. Operating the Sewing machine

4.1 Threading the Needle Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2 Needle Thread Quantity for Sure Stitch Formation . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.3 Threading the Hook Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.4 Setting the Hook Thread Take-up Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.5 Setting the Pressure Foot Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.6 Switching the Edge Cutter On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.7 Calling Up Crimping Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.8 Setting of Standard Stitch Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.9 Threading of Lower Tape Feed (only 550-12-16) . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Home

1. Product Description

1.1 Brief Description

The 550-12-23; -24 and -12-26 are configured work stations for the

precrimping of upholstery pieces.

The work stations are equipped with a single-needle double locked

stitch machine with a differential drop feed (two independently-

adjustable feed dogs) and a differentiable, alternating top feed.

Via a keypad strip 15 different crimping values and 16 intermediate

values can be selected. A knee switch turns them on and off again. In

order to achieve a securer drawing of the stitches a second needle

thread tension is switched on when a crimping value is turned on. The

moment of switching on a second needle thread tension can be

preselected between crimping values 1 and 5 inclusive.

Drive and control of the work station occurs via a 3 phase motor in

conjunction with a Microcontrol control.

To increase the crimping intensity the work station is equipped with an

upper and /or lower tape feed and tensioning. The fixing tape width is

2,25 mm by the sub-classes 550-12-13; -12-14 and 3 mm by the

sub-class 550-12-16.

The tape tension can be turned on via a key and turned off through the

knee switch when the crimping value is switched off.

1.2 Proper Use

The 550-12-23; -24 and -26 is a configured sewing station which can

be used for sewing light to medium heavy sewing material.

Such material is, as a rule, fabric composed of textile fibers or leather.

These sewing materials are used in the garment, furniture and car

upholstery industries.

Furthermore, it may be possible to also execute so-called technical

seams with this special sewing machine. Here, however, the operator

(DürkoppAdler AG would be applications are, on the one hand,

relatively rare and, on the other, their variety is immense. Depending

on the results of this evaluation it may be necessary to adopt

appropriate safety measures.

In general, only dry material may be worked with this special machine.

The material may not be thicker than 10 mm when it is pressed

together by the lowered unit could only be allowed to be operated with

eye protection. Such eye protection is not available at this time.

The seam is generally made with sewing yarns of textile fibers with

dimensions up to 15/3 NeB (cotton threads), 20/3 Nm (synthetic

threads) or 25/4 Nm (core spun threads). Those wishing to use other

threads must also first evaluate the dangers arising herefrom and, if

necassary, take safety measures.

This special sewing machine may only be ainstalled and operated in

dry and clean areas. If the sewing unit is employed in other areas,

which are not dry and clean, other, to be agreed upon, measures may

become necessary (see EN 60204-3-1: 1990).

We, as a manufacturer of industrial sewing machines, as that, at a

minimum, semi-skilled operating personel work on our products so that

all normal operations and, where applicable, their dangers can be

presumed to be known.

Produkt Specifikationer

Mærke:	Dürkopp Adler
Kategori:	Symaskine
Model:	550-12-26

Har du brug for hjælp?

Hvis du har brug for hjælp til Dürkopp Adler 550-12-26 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Dürkopp Adler Manualer

Dürkopp Adler 2171-5 Manual

3 August 2025

Dürkopp Adler 1365-7 Manual

3 August 2025

Dürkopp Adler D888 e-con Manual

3 August 2025

Dürkopp Adler D887 e-con Manual

3 August 2025

Dürkopp Adler 550-869 Manual

3 August 2025

Dürkopp Adler 533 Manual

3 August 2025

Dürkopp Adler D888 Manual

3 August 2025

Dürkopp Adler 805 Manual

3 August 2025

Dürkopp Adler 550-767 Manual

13 Oktober 2024

Dürkopp Adler 204-370 Manual

11 Oktober 2024

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025