DV8 Offroad CCT2-01 Manual


Læs gratis den danske manual til DV8 Offroad CCT2-01 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om DV8 Offroad CCT2-01, eller vil du spørge andre brugere om produktet?

Side 1/4
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
TUNDRA CENTER CONSOLE
AND BRIDGE
3RD GEN (2022+) TOYOTA TUNDRA
TOOLS SKILL TIME REQUIRED LEVEL REQUIRED
-Nutsert Tool (Optional)
-Drill
-11/32” Drill Bit
-Ratchet
-4mm Allen Bit
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Novice/Intermediate
- 1 (you) to 2 persons
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
-1.5 Hours
Time to install this should only
take about an half an hour.
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?
Assemble the bridge and side mounts using
a 4mm allen bit and provided M6 hardware..
Fit the center console into place.
When you are satised with the tment,
mark the mounting holes with a sharpie and
remove/disassemble the center console and
bridge.
Note: An extra pair of hands to hold everything in
place will make this process easier.
INSTALLATION MANUAL
NEED HELP?
855-680-9595
- (12) M6x14 Allen Head
- (12) M6 Flat Washer
- (12) M6 Serrated Nuts
- (12) M6x14 Nutserts
HARDWARE INCLUDED
Begin by unpacking all items and inspect-
ing for missing pieces or damage. If you
have any concerns, please contact the com-
pany the product was purchased from.
STEP 1
STEP 2


Produkt Specifikationer

Mærke: DV8 Offroad
Kategori: Ikke kategoriseret
Model: CCT2-01

Har du brug for hjælp?

Hvis du har brug for hjælp til DV8 Offroad CCT2-01 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret DV8 Offroad Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer