DW Drums 5000 TD4 Manual

DW Drums Musikinstrument 5000 TD4

Læs gratis den danske manual til DW Drums 5000 TD4 (6 sider) i kategorien Musikinstrument. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om DW Drums 5000 TD4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
Two-Way Beater
Accelerator/Turbo
Chain & Sprocket or
Cam w/Nylon Strap
Hex Shaft
Base Casting
Footboard
Hinge
Pedal Plate
Beater Shaft
Beater Hub
Stroke Adjustment
Rocker
Spring
Hoop Clamp
Height Adjustment
Spring Tension
Adjustment
Knurled Nut
Hex Nut
Spur
Hoop Clamp
Attachment
DrumKey Clip
O W N E R ’ S M A N U A L
DW 5000 Series Delta3
and Original Bass Drum Pedals
T
hanks for purchasing this DW product. It has been designed and manufactured to provide a
lifetime of trouble-free service. Please take a moment to familiarize yourself with the exclusive
features and operating suggestions contained in this manual in order to ensure its optimum performance.
Should you have any further questions, feel free to contact your local authorized DW Dealer.
— Don Lombardi
president, Drum Workshop, Inc.
DW 5000 SERIES BASS DRUM PEDALS
GENERAL FEATURES AND ADJUSTMENTS
Stroke Adjustment
The Infinite (Slotted) Stroke Adjustment can be used to var y the distance the beater travels before hitting the drum. For a
slightly heavier (longer) stroke move the screw towards the back, for a lighter (shor ter) stroke move the screw for wards
Beater Height
The length of the beater rod can be adjusted to achieve the desired feel and impact area. Generally, the beater should hit
the center or an area 1-2 inches above the center of the drum. Once the desired height is achieved, secure the beater hub
memory lock using the 2mm allen wrench (included) to maintain consistent positioning
Beater Playing Surface
The 101 Two-Way Beater (standard) has both a cur ved, medium felt side for a rounder, warmer attack and a flat, hard
plastic side for a sharper, brighter attack, much like wood but without the weight
Beater Weight
The adjustable beater weight can be positioned on the beater shaft to increase the power of the stroke
Beater Memory Lock
To set the beater memor y lock, place it loosely on the beater shaft and place the beater shaft in the beater hub. Slide the
memory lock down the shaft so that it fits into the notches on the beater hub. Adjust the beater to the desired playing
position and tighten the drumkey screw on the beater hub as well as the set screw on the memory lock with the small allen
wrench (provided). The beater ball should automatically be positioned at a right angle to the memor y lock so that the beater
can be reversed from the soft felt to the hard plastic side by merely raising the beater and rotating it 180 degrees.
Spring Tension
DW Drum Pedal Springs feature an internal noise reduction damper as well as a tension locking mechanism. To increase o
decrease the spring tension loosen the round knurled nut at the base of the spring assembly and pull down on the spring
to release the locking hex nut. Tighten or loosen the lock nut to the create the desired tension, then release the hex nut
and retighten knurled nut to lock-in the adjustment
Side/Dual Adjusting Hoop Clamp
The DW Toe Clamp is designed to fit a wide variety of manufacturer’s bass drum hoops. To set the space of the hoop
clamp for your bass drum, use the allen wrench (provided) to loosen the set screw on the clamp and then rotate the
knurled nut to narrow or widen the gap. Re-tighten the set screw. Position the pedal on the center of the hoop and tighten
the side wing screw securely. Use the provided rubber hoop protector to avoid damage to the bass drum hoop
Chain Position & Footboard Angle Adjustment
The length of the chain determines the angle of the footboard and, when adjusted in combination with the beater height
and stroke adjustment, the length of the stroke. To change the position of the chain, carefully remove the master link con
nector from the chain and sprocket and, to adjust the chain, reposition it as desired by moving it to an alternate hole in the
sprocket. The factory settings are recommended for most general playing situations and preferred by many drummers
Strap Length & Footboard Angle Adjustment
To change the length of the nylon strap and footboard angle, remove the nut and washers from the screw on the cam, repo-
sition the chain or strap using one of the alternate links/holes. Then replace the nut and washers
Non-Skid Spurs & Velcro™
All DW Bass Drum Pedals include built-in adjustable spurs and non-skid Velcro™ on the bottom of the pedal plates to
prevent bass drum crawl.

Produkt Specifikationer

Mærke: DW Drums
Kategori: Musikinstrument
Model: 5000 TD4

Har du brug for hjælp?

Hvis du har brug for hjælp til DW Drums 5000 TD4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Musikinstrument DW Drums Manualer

DW Drums

DW Drums 2000 Manual

19 August 2024
DW Drums

DW Drums 5000 AD4 Manual

18 August 2024
DW Drums

DW Drums 5000 TD4 Manual

15 August 2024
DW Drums

DW Drums 9000 Manual

15 August 2024
DW Drums

DW Drums 3000 Manual

15 August 2024

Musikinstrument Manualer

Nyeste Musikinstrument Manualer

Gravity

Gravity KS RD 1 Manual

7 September 2025
Yamaha

Yamaha YT-300D Manual

6 September 2025
Yamaha

Yamaha YM-35G Manual

6 September 2025
Yamaha

Yamaha DTX482K Manual

3 September 2025
Yamaha

Yamaha TP-3329 Manual

2 September 2025
Yamaha

Yamaha Pianica P-25F Manual

28 August 2025
Hohner

Hohner Special 20 Classic F Manual

23 August 2025
Max

Max Rhapsody61P Manual

23 August 2025
TOA

TOA SC-610 Manual

22 August 2025
Panasonic

Panasonic SX-KN2400 Manual

18 August 2025