Earlex HG1500 Manual

Earlex Varmepistol HG1500

Læs gratis den danske manual til Earlex HG1500 (4 sider) i kategorien Varmepistol. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Earlex HG1500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

EARLEX HG1500

Thank you for purchasing the Earlex heat gun.

This is a highly versatile tool that can be used in a

variety of applications.

BEFORE USE - PLEASE READ THE SAFETY &

OPERATING INSTRUCTIONS

Please retain for future reference

Please register your product at www.earlex.com

G135.qxd:G29 09/05.qxd 28/7/11 09:22 Page 1

SAFETY OPERATING INSTRUCTIONS

TECHNICAL SPECIFICATION

Power supply 120V~ 60Hz

Max. output 1500 Watts

Temp at outlet Position 1) 660°F

Position 2) 1110°F

Weight

(excl. nozzles) 750g

*MAX. temperatures achieved with concentrator

nozzle.

ABOUT THE HG1500

The HG1500 is a highly versatile electric

heat gun which can be used for many

different applications, such as:



Removal of paint



Defrosting metal water pipes



Forming and welding plastic



Heat shrinking tubing



Soldering

TO OBTAIN THE BEST RESULTS FROM

YOUR HEAT GUN PLEASE READ THE

INSTRUCTIONS CAREFULLY BEFORE

USE.

HEAT SETTINGS

The heat gun has two settings:

1. Low heat (switch down) - for use

where the work surface or

surroundings must not be allowed to

get too hot.

Setting~660°F.

2. High heat (switch up) - for faster heat

up time of the work surface where

you can also operate the gun at a

greater distance.

Setting~1110°F.

PLEASE READ BEFORE USE

DO NOT



Touch the nozzle.



Change/rotate the nozzle while the unit is

turned on.



Leave the heat gun unattended when it is

switched on.



Allow children to operate or play with the

heat gun.



Carry the heat gun by the power cable.



Allow heat to be directed onto the power

cable.



Use the heat gun as a hair dryer.



Restrict air flow from the nozzle outlet or

fan inlets.



Allow the heat gun to become damp or be

operated in damp conditions.



Use the heat gun close to inflammable

materials because heat may be conducted

to combustible materials which are out of

sight.



Apply to the same place for a long time.



Under any circumstances aim the heat gun

at another person or animal.



Use when explosive vapor or dust is in the

air.

Danger of burns - We recommend

wearing a pair of heavy grade, non

PVC type work gloves. Danger of fire

or explosion if the appliance is not

used with care.



When changing the nozzle, switch off and

allow the accessory and nozzle to cool.



After use stand the heat gun up vertically

(on its rear end) and allow to completely

cool down.



A hot nozzle can cause damage.



Before every use check the condition of

the plug and cable. If these are damaged

in any way do not use. Repairs must be

carried out by a fully qualified electrician.



Always ensure there is adequate

ventilation as gases and vapors may be

given off when stripping paint. Ensure that

protective goggles and masks are used.



Poisonous or inflammable gases may be

produced when working with paints

(especially older type lead paints),

varnishes, plastics and similar materials.



Ensure the heat gun switch is in the center

off position when connecting to the power

supply.



Ensure children and pets are kept away

from the work area.



It is recommended that a suitable circuit

breaker to UL489 is fitted between the

power supply and product for added

protection against electric shock.



This product is intended for ʻhouseholdʼ

use only.



This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision

or instruction concerning use of the

appliance by a person responsible for

their safety.

Thermal cut out – This heat gun is fitted with a self resettable thermal cut-out. If you find the

fan is on but the heating element is off, hold the gun away from the work piece and allow the

fan to cool the element. The heat gun should reset in approx. 1min.

G135.qxd:G29 09/05.qxd 28/7/11 09:22 Page 2

Produkt Specifikationer

Mærke:	Earlex
Kategori:	Varmepistol
Model:	HG1500
Vægt:	821 g
Produktfarve:	Grå
Indgangseffekt:	1200 W
Strømkilde:	Vekselstrøm
Maksimal luftstrøm:	- l/min
Arbejdstemperatur (min.):	349 °C
Arbejdstemperatur (maks.):	593 °C