ECS KM400A-M2 Manual
Læs gratis den danske manual til ECS KM400A-M2 (10 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om ECS KM400A-M2, eller vil du spørge andre brugere om produktet?
Side 1/10
39
VT8237 SATA RAID User Manual
Enter BIOS Configuration Utility
When the system powers on, the following information will appear on
screen. Press the ‘Tab’ key to enter BIOS configuration
utility.
VIA Technologies,Inc.VIA Serial ATA RAID BIOS Setting Utility v1.00
Copyright (C) VIA Technologies,Inc.All Right reserved.
Scan Devices,Please wait . . .
Press < Tab > Key into User Window!
Channel 0 Master: IC35L040AVVA07-0
Channel 1 Master: IC35L040AVVA07-0
The main interface of BIOS conguration utility is as below:
VIA Tech. RAID BIOS Ver 1.00
8Create Array Create a RAID array with
8Delete Array the hard disks attached to
8Create/Delete Spare VIA IDE controller
8Select Boot Array
8Serial Number View F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
VT8237 SATA RAID User Manual
40
Technical Reference Booklet
Create Disk Array
1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to
select the Create Array command and press <Enter> to call out the list of creation
steps.
VIA Tech. RAID BIOS Ver 1.00
8Auto Setup For Data Security Create a RAID array with
8Array Mode RAID 1 (Mirroring) the hard disks attached to
8Select Disk Drives VIA IDE controller
8Start Create Process
F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.
Just highlight the target array mode that you want to create, and press <Enter> to
VIA Tech. RAID BIOS Ver 1.00
8RAID 0 for performance Create a RAID array with
8RAID 1 for data protection the hard disks attached to
VIA IDE controller
8RAID SPAN for capacity
F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Produkt Specifikationer
| Mærke: | ECS |
| Kategori: | Bundkort |
| Model: | KM400A-M2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til ECS KM400A-M2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort ECS Manualer
20 Juni 2025
20 Juni 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
16 November 2024
18 August 2024
Bundkort Manualer
- Foxconn
- Intel
- MSI
- Advantech
- EPoX
- Elitegroup
- Evga
- Sharkoon
- Sapphire
- AOpen
- Supermicro
- Biostar
- Gigabyte
- Asus
- NZXT
Nyeste Bundkort Manualer
23 Juni 2025
22 Juni 2025
22 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025