ECS KV2 Extreme Manual

ECS Bundkort KV2 Extreme

Læs gratis den danske manual til ECS KV2 Extreme (10 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om ECS KV2 Extreme, eller vil du spørge andre brugere om produktet?

Side 1/10
39
VT8237 SATA RAID User Manual
Enter BIOS Configuration Utility
When the system powers on, the following information will appear on
screen. Press the Tabkey to enter BIOS configuration
utility.
VIA Technologies,Inc.VIA Serial ATA RAID BIOS Setting Utility v1.00
Copyright (C) VIA Technologies,Inc.All Right reserved.
Scan Devices,Please wait . . .
Press < Tab > Key into User Window!
Channel 0 Master: IC35L040AVVA07-0
Channel 1 Master: IC35L040AVVA07-0
The main interface of BIOS conguration utility is as below:
VIA Tech. RAID BIOS Ver 1.00
8Create Array Create a RAID array with
8Delete Array the hard disks attached to
8Create/Delete Spare VIA IDE controller
8Select Boot Array
8Serial Number View F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
VT8237 SATA RAID User Manual
40
Technical Reference Booklet
Create Disk Array
1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to
select the Create Array command and press <Enter> to call out the list of creation
steps.
VIA Tech. RAID BIOS Ver 1.00
8Auto Setup For Data Security Create a RAID array with
8Array Mode RAID 1 (Mirroring) the hard disks attached to
8Select Disk Drives VIA IDE controller
8Start Create Process
F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.
Just highlight the target array mode that you want to create, and press <Enter> to
VIA Tech. RAID BIOS Ver 1.00
8RAID 0 for performance Create a RAID array with
8RAID 1 for data protection the hard disks attached to
VIA IDE controller
8RAID SPAN for capacity
F1 : View Array/disk Status
éê : Move to next item
Enter : Conrm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd
Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd


Produkt Specifikationer

Mærke: ECS
Kategori: Bundkort
Model: KV2 Extreme
Bredde: 305 mm
Dybde: 244 mm
Ethernet LAN-porte (RJ-45): 2
Antal USB 2.0-porte: 4
Udgange til hovedtelefoner: 1
Lyd-output kanaler: 5.1 kanaler
Strømkilde type: ATX
Maksimal intern hukommelse: 4 GB
On-board grafikkort: Ingen
Mikrofonindgang: Ja
S/PDIF-udgang: Ja
Kompatible operativsystemer: Windows XP
Processorproducent: AMD
Netværksfunktioner: Gigabit Ethernet
Antal serielle porte: 1
Antal PS/2-porte: 1
Processor sokkel: Sokkel 939
Understøttelse af parallel behandlingsteknologi: Ikke understøttet
Lydchip: Realtek ALC655
Antal hukommelsesstik: 4
Understøttede hukommelsesclock-hastigheder: 266,333,400 MHz
USB 2.0-stik: 2
Antal SATA stik: 4
CPU-ventilatorstik: Ja
Indbrudsttik til kabinet: Ja
Lydstik på frontpanel: Ja
Motherboard form faktor: ATX
BIOS-type: Award
BIOS-hukommelsesstørrelse: 32 Mbit
Antal IEEE1394-stik: 2
Antal parallelle porte: 1
S/PDIF port, indgang: Ja
Strømstik til ventilator: Ja
Floppy-drev, stik: Ja
PCI-slots: 5
Antal parallelle ATA-stik: 3
AGP x8 slots: 1

Har du brug for hjælp?

Hvis du har brug for hjælp til ECS KV2 Extreme stil et spørgsmål nedenfor, og andre brugere vil svare dig