Einhell ESS 9000-T Manual

Einhell Ikke kategoriseret ESS 9000-T

Læs gratis den danske manual til Einhell ESS 9000-T (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Einhell ESS 9000-T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Art.-No.: 500.0602.00.00

37.460.48

Assembly and

Operating Instructions

Sauna Controller

ESS 9000-T

Anleitung ESS 9000-T_GB 24.10.2001 10:04 Uhr Seite 1

Contents

Safety precautions 2

Technical data 2

Items supplied 2

Assembly 2

Electrical connection 3

Assembly of sensor cable 3

Operation 4

Troubleshooting 4

Declaration of EC Conformity 8

Warranty 9

Safety precautions:

Electrical connection work may only be performed by

a qualified electrician in accordance with VDE 0100.

All regulations issued by your local power supply

company are to be observed.

Only a qualified electrician is allowed to make repairs

to the electrical unit.

Risk of fatal accident.

Always follow the instructions listed in the assembly

and operating instructions.

The sauna light must be splash proof and be able to

withstand a temperature of 140°C.

Technical data:

Mains voltage 400 V 3~ 50 Hz

Heat cycle limit 6 hours

Light max. 300 W

Sensor KTY sensor with 136°C temperature cut-out

Control range 40°C to 125°C

Delivery Items supplied:

Central control unit

Sauna sensor (temperature sensor and

overtemperature cut-out)

Bag of assembly parts

Assembly:

The controller should be mounted on one of the

external sauna walls near the heater as is shown in

Fig. 1. In most cases, the mounting location is

already determined by empty cable conduits. The

controller with the cable bushings is then fastened

over the conduits.

Disassembling the case cover

The fixing screws can be undone using a recessed

head screwdriver through the side holes in the front

cover.

After removing both fixing screws and pulling off the

rotary knobs, the case cover can be detached

(Fig. 2).

Turn in the first screw (4x20 mm) approximately 3

mm as is shown in Figure 3 and hook on the case.

Position the case horizontally and fasten with the left

and right screws.

Use a sharp knife to enlarge the cable holes to the

size required for the electrical cables.

eye level

Anleitung ESS 9000-T_GB 24.10.2001 10:04 Uhr Seite 2

Produkt Specifikationer

Mærke:	Einhell
Kategori:	Ikke kategoriseret
Model:	ESS 9000-T

Har du brug for hjælp?

Hvis du har brug for hjælp til Einhell ESS 9000-T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Einhell Manualer

Einhell Genial II Manual

7 Juli 2025

Einhell HC 10 D Manual

7 Juli 2025

Einhell AFEN 15 Manual

7 Juli 2025

Einhell Genial IV Manual

7 Juli 2025

Einhell SC 10-T Manual

7 Juli 2025

Einhell 45.000.67 Manual

4 Juli 2025

Einhell ASA 550/100 Manual

31 Marts 2025

Einhell ESS 9000-T Manual

29 Marts 2025

Einhell DS 5/1 Manual

28 Marts 2025

Einhell NVK 1601 Manual

27 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Xiaomi Watch S1 Manual

7 Juli 2025

Bestway 561KM Manual

7 Juli 2025

RIX Pocket K2 Manual

7 Juli 2025

Xiaomi Portable Electric Air Compressor 1S Manual

7 Juli 2025

Grunkel WB-2000 PLUS NG Manual

7 Juli 2025

Samsung AQ12ASAX Manual

7 Juli 2025

Pentax IQZoom EZY-S Manual

7 Juli 2025

Samsung AQ09EAX Manual

7 Juli 2025

Schaerer Coffee Soul Manual

7 Juli 2025

YoloLiv YoloBox Ultra Manual

7 Juli 2025