Using This Manual
This Owner’s Manual contains important information on safety and instructions intended to assist
you in the operation and maintenance of your appliance. Please take the time to read this Owner’s
Manual before using your oven and keep this book for future reference.
The following symbols are used in the text of this Owner’s Manual
SAFETY INSTRUCTIONS
Installation of this oven must be performed only by a qualified technician. The installer is
responsible for connecting the appliance to the mains power supply in observance of the relevant
safety recommendations.
Electrical Safety
If the oven has been damaged in transport, do not connect it.
-
Appliance must be connected to the mains power supply only by a qualified technician.
-
In the event of a fault or damage to the appliance, do not attempt to operate it.
-
Repairs should be performed by an authorized technician only. Improper repair may result in
considerable danger to you and others.
-
If the supply cord is defective, it must be replaced by a qualified service technician.
-
Electrical leads and cables should not be allowed to touch the oven.
-
Never use adaptor or shunts to connect to the mains power supply.
-
The power supply of the appliance must be turned off when it is being cleaned.
WARNING
The appliance should be disconnected before replacing the lamp to avoid the possibility of electric
shock. During oven operation, the interior surfaces will become extremely hot.
Safety during Operation
-
This oven is designed only for the cooking of household food.
-
During use, the oven interior surfaces are hot enough cause burns. Avoid touching the to
heating element or interior surfaces of the oven until they have had time to cool down.
-
Never store flammable materials in the oven.
-
When cooking, take care when opening the oven door as hot air and steam can escape
rapidly.