Electia BXA-8 Manual

Electia Alarmsystem BXA-8

Læs gratis den danske manual til Electia BXA-8 (15 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Electia BXA-8, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/15
OWNER´S MANUAL
Outdoor siren BXA-8
(Art.nr 36-3817)
2012 07 19- -
SW1
Siren Learning
OFF
Normal operation
ON
Learn-in mode
SW2
Strobe Activation
OFF
On for alarm period
ON
On until reset
SW3
SW4
Siren Duration
OFF
OFF
3 min.
ON
OFF
5 min.
OFF
ON
10 min.
ON
ON
1 second (test)
SW5
OFF
Slave
ON
Stand alone-
SW6
Memory Reset
OFF
Normal
ON
Clear Memory
SW7
Reserved
GB W -8ireless Outdoor Bell Box, BXA
1. Mounting Holes x 4
2. Tamper Switch
3. Function Dip Switch Set
Contains 7 jumpers to enable the learning
mode and to set the alarm period of siren
and strobe light.
4. Securing Screw
To secure the case from opening
5. Power Switch
To enable/disable the power supply
6. LED
Accessories included
In addition to the Bell bo the following accessories are also included in the package:x itself,
a. 4 x large wall plugs.
b. 4 x 4mm x 30mm cross head fixing screws.
c. 4 x 1.5V D alkaline cells.
Dip Switch Table
Remove the cover by unscrewing the single screw located at the
bottom. In -the middle of the “L shaped” PCB board, you can see
a dip switch dip switches set which consists of 7 . The function of
each dip switch is listed as table below.
The DIP Switch is either ON or OFF. Top position indicates ON
and bottom position indicates OFF.
.
Power Supply
Bell box is powered by 4 D- cell alkaline batteries with life expectancy of over 3 years.
T he Bell box can detect if the battery is low. Low battery detection operates at a threshold of 4V +/- 10% where the Bell box
has enough power to typically operate for 1 month before complete exhaustion. The siren low battery signal will be
enunciated by five beeps when arming / disarming.
B ell Box Function Overview
Siren Memory Clear
The siren resets and clears all memory contents by a removal of the batteries. Wait for 1 minute and slide dip switch 6 to
ON position before re If dip switch 6 is turned OFF, - inserting the batteries. The siren will produce a short confirmation tone.
then siren ID code learned will reset every time when the siren has a power-up sequence.
ON
OFF

Produkt Specifikationer

Mærke: Electia
Kategori: Alarmsystem
Model: BXA-8

Har du brug for hjælp?

Hvis du har brug for hjælp til Electia BXA-8 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Alarmsystem Electia Manualer

Electia

Electia PSSA-8 Manual

11 August 2024
Electia

Electia BXA-8 Manual

15 November 2022
Electia

Electia Home Prosafe 2745 Manual

5 November 2022
Electia

Electia EL-SDH Manual

20 Oktober 2022

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Smartwares

Smartwares FGA-13091 Manual

16 September 2025
Brandson

Brandson 304339 Manual

15 September 2025
Kidde

Kidde SM120X Manual

14 September 2025
Elektrobock

Elektrobock ELBO-073 Manual

14 September 2025
Kidde

Kidde 20SD10-CA Manual

3 September 2025
Kidde

Kidde 20SDR-CA Manual

2 September 2025
Kidde

Kidde 20SA10-CA Manual

2 September 2025
Schwaiger

Schwaiger DAB400 Manual

1 September 2025
Blaupunkt

Blaupunkt DG2-Pro Manual

1 September 2025
Pentatech

Pentatech TMF01 Manual

16 August 2025