ElectriQ IQGH603S Manual

ElectriQ Komfur IQGH603S

Læs gratis den danske manual til ElectriQ IQGH603S (24 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om ElectriQ IQGH603S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Service Manual

For Built-in gas hob

Warnings:

 This service manual is not available to the general users, but only applies to

professional technicians with relevant qualifications. Any incorrect maintenance

may result in other dangers!

 The power and gas supply must be cut off before maintenance!

 A new power cord which meets the relevant technical requirements must be used

once possible hidden malfunctions are found with the current power cord (refer to

this Manual)!

 Please read carefully all safety warnings in this Manual before maintenance!

 The product is prohibited from using until test is conducted as per relevant

regulations after maintenance!

 This service manual applies to many models, so the specific operations please prevail in

kind!

V3.0

May, 2015

Catalogue

1. Precaution ........................................................................................................................ 4

1.1. Safety Precaution ............................................................................................................................................ 4

1.2. Warning ........................................................................................................................................................... 4

2. Description of the appliance ............................................................................................ 5

2.1. Features ........................................................................................................................................................... 5

2.2. Components and parts .................................................................................................................................... 6

3. Installation ....................................................................................................................... 7

3.1. Dimension ........................................................................................................................................................ 7

3.2. Installation Dimension ..................................................................................................................................... 8

4. Electric Diagram ....................................................................................................................................... 9

5. Reassembly and Disassembly ........................................................................................ 10

5.1. Safety precautions ......................................................................................................................................... 11

5.2. Tools .............................................................................................................................................................. 11

5.3 Disassembly .................................................................................................................................................... 12

5.3.1. Disassemble the Top Plate ..................................................................................................................... 12

5.3.2. Disassemble the Thermocouple ............................................................................................................. 13

5.3.3. Disassemble of the Ignition Pin .............................................................................................................. 13

5.3.4. Disassemble of the Microswitch Harness .............................................................................................. 13

5.3.5. Disassemble of the Gas Pipe .................................................................................................................. 14

5.3.6. Disassemble of the Bottom Cup ............................................................................................................. 14

5.3.7. Disassemble of the Power Cord Assembly ............................................................................................. 14

5.3.8. Disassemble of the igniter ...................................................................................................................... 15

5.3.9. Disassemble of the Valve & Manifold Pipe Assembly ............................................................................ 15

5.310. Disasmble of the Gas Connection ......................................................................................................... 16

5.3.11. Disassemble of thebottom plate .......................................................................................................... 16

5.4. Reassembly .................................................................................................................................................... 17

5.4.1. Reassemble of the Ignition Pin ............................................................................................................... 17

5.4.2. Reassemble of the Thermocouple.......................................................................................................... 17

5.4.3. Reassemble of the Gas Pipe……………………………………………………………………………………………………………..17

5.4.4. Check Point after assemble .................................................................................................................... 17

6. Troubleshooting ............................................................................................................. 17

6.1. Troubleshooting ............................................................................................................................................ 18

6.2. Problems and Corrective Measures .............................................................................................................. 19

6.3. Maintenance and test ................................................................................................................................... 21

7. Gas Conversion .............................................................................................................. 22

7.1. Replacement of gas-type fitting .................................................................................................................... 22