
Installing with the threaded rod
Suspending any object is potentially
dangerous and should only be attemp-
ted by individuals who have a thorough
knowledge of the techniques and regu-
lations of suspending objects overhead.
Electro-Voice strongly recommends
that loudspeakers be suspended taking
into account all current national, fed-
eral, state, and local laws and regula-
tions. It is the responsibility of the in-
staller to ensure all loudspeakers are
safely installed in accordance with all
such requirements. When loudspeakers
are suspended, Electro-Voice strongly
recommends the system be inspected
at least once per year or as laws and
regulations require. If any sign of weak-
ness or damage is detected, remedial
action should be taken immediately.
The user is responsible for making sure
the wall, ceiling, or structure is capable
of supporting all objects suspended
overhead. Any hardware used to sus-
pend a loudspeaker not associated
with Electro-Voice is the responsibility
Use a steel threaded rod size 7/16"-20.
To , do the follow-install using a threaded rod
1. Mount (not included) to ceil-threaded rod
We highly suggest double nutting the threaded
2. Screw (not included) on the speakerjam-nut
end of the threaded rod on.
Leave enough space to screw the adapter.
3. Screw into threaded rod at leastadapter
Align mounting slot, if needed.
4. Screw down until it contacts thejam-nut
surface of the threaded rod adapter.
Fully tighten against each other.
5. Insert into threadedpendant mounting plate
6. Insert the threaded rod adapter locking
screw through the adapter holes and
speaker mounting plate center hole.
7. Tighten to the other endnylon locking nut
8. Attach a secondary auxiliary support cable
(not included) onto one of the suspension
tab side holes in the top of the speaker.
9. Secure the secondary auxiliary support
cable (not included) to a different ceiling
support point of the building structure.