Eliminator Lighting E 108 Manual


Læs gratis den danske manual til Eliminator Lighting E 108 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Eliminator Lighting E 108, eller vil du spørge andre brugere om produktet?

Side 1/1
E 108
SPECIFICATIONS:
Model: E 108
Lamp: 2 x LL-64514 120V 300W
Weight: 24 lbs.
Size: 16”H x 11”W x 14.5”L
Fuse: 10 Amp
Supply Voltage: 120V
Duty Cycle: 10 min. on,10 min. off
Colors: Multiple Colored Lenses
Warranty: 1 Year Limited Warranty
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The E 108 is a powerful effect for clubs and dj’s. The
E 108 creates a dramatic cluster of 40 multi-dichroic
colored beams. This unit features an internal micro-
phone that allows the beams to be triggered by
sound. The E 108’s beams bounce up and down to
the beat of the music. The E 108 is ready to be hung
or set on the ground in a safe position. When mount-
ing this unit to truss be sure to use a clamp. Plug the
unit in to a standard 110 wall outlet. After plugging
the unit in, the fixture will react to the beat of the
music via the sound active internal microphone. The
unit has a sensitivity knob on the rear of the unit that
makes more or less sensitive to sound. Turing the
knob in clockwise direction will make the unit more
sensitive to sound. The unit requires sound to acti-
vate the movement.
Lamp Replacement: Disconnect the units main
power supply. Unscrew and remove the thumb
screws on the top of the fixture. Remove and replace
the bulbs. Reassemble and reconnect the power
supply. Be sure to follow all the handling instruction
that are included with your new lamp.
1 Year Limited Warranty: Eliminator Lighting war-
ranty is valid from the date of purchase.
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
Our 1 year limited warranty covers manu-
facturing defects only. Serial number, place
of purchase with dated valid receipt must
be submitted at time of service. Eliminator
Lighting warranty does not cover items or
parts prone to wear and tear: lamps, fuses,
brushes and belts. Eliminator Lighting war-
ranty is only valid with-in the United States.
Caution! Never open unit when in use.
Always disconnect main power before serv-
ing or replacing lamp. Remember to always
replace with the exact same type lamp and
fuse.
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fingers
as the oil from your hands will short-
en lamp life. Also, never move fixture
until lamp has had ample time to
cool. Remember, lamps are not cov-
ered under warranty conditions.


Produkt Specifikationer

Mærke: Eliminator Lighting
Kategori: Ikke kategoriseret
Model: E 108

Har du brug for hjælp?

Hvis du har brug for hjælp til Eliminator Lighting E 108 stil et spørgsmål nedenfor, og andre brugere vil svare dig