Elica Calabria ECL630S4 Manual

Elica Emhætte Calabria ECL630S4

Læs gratis den danske manual til Elica Calabria ECL630S4 (10 sider) i kategorien Emhætte. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Elica Calabria ECL630S4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
Use, Care, and
Installation Guide
Guide
d’utilisation,
d’entretien et
d’installation
Guía de
instalación, uso y
mantenimiento
READ AND SAVE THESE
INSTRUCTIONS
LISEZ CES
INSTRUCTIONS ET
CONSERVEZ-LES
LEA Y CONSERVE
ESTAS INSTRUCCIONES
LIB0152213
Printed in Mexico
10/18
Models: KIT0154387
9
Install In-Blower System
NOTE: The blower motor housing can be mounted using
4 holes from either the inlet side or the outlet side of the
blower.
A
A
A
A
A
A
A. Mounting holes
1 Position the in-line blower motor housing in its mounting
location and mark the 4 mounting hole locations.
2 Drill 4 mounting pilot holes using a ³⁄₁₆” (0.5 cm) drill bit.
3 Attach the in-line blower motor housing to the mounting
location with mounting (4) 6.3x60 mm screws and
(4)4x1.8 washers(Parts are included with the range hood
motor kit)
4 If removed, reinstall the blower motor assembly and
secure it with the screws previously removed.
5 If removed, reattach the motor electrical plug to the
connector on the blower motor assembly.
Complete Preparation
1 Determine and make all necessary cuts for the vent
system. IMPORTANT: When cutting or drilling into the
ceiling or wall, do not damage electrical wiring or other
hidden utilities.
2 Determine the location where the ¹⁄₂” (1.3 cm) wiring
conduit will be routed through the ceiling or wall between
the in-line blower and the range hood.
3 Drill a 1¹⁄₄” (3.2 cm) hole at this location.
4 Locate the electrical terminal boxes in the in-line blower
housing and range hood Remove the terminal box covers .
and set the covers and screws aside.
A
B
A. Terminal Box Cover
B. Knockout
5 Remove the electrical knockout from the in-line blower
housing and range hood (see the range hood installation
instructions) to prepare for the installation of the UL
listed or CSA approved ¹⁄₂” (1.3 cm) wiring conduit and
conduit connector.
6 With the range hood mounted (see the range hood
installation instructions), run the ¹⁄₂” (1.3 cm) wiring
conduit between the in-line blower motor housing and the
range hood. Pull enough ¹⁄₂” wiring conduit to allow for
easy connection to the terminal boxes in the in-line blower
housing and range hood.
A
B
C
D
F
E
A. In-Line Blower Kit
B. Range Hood Terminal
Box
C. Power Supply wiring
Conduit
D. In-Line Blower Wiring
Conduit (not included)
E. In-Line Blower Terminal
Box
F. In-Line Motor Electrical
Plug Cable

Produkt Specifikationer

Mærke: Elica
Kategori: Emhætte
Model: Calabria ECL630S4

Har du brug for hjælp?

Hvis du har brug for hjælp til Elica Calabria ECL630S4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Emhætte Elica Manualer

Elica

Elica Glacier Manual

15 Januar 2025
Elica

Elica Illusion PRF0158012 Manual

14 Januar 2025
Elica

Elica Horizonte EDS IX VT/A/90 Manual

12 Januar 2025
Elica

Elica Rise PRF0106864B Manual

29 December 2024
Elica

Elica PRF0104628A Manual

29 December 2024
Elica

Elica Sweet P 85 A White Manual

8 Oktober 2024
Elica

Elica PRF0041830 Manual

30 September 2024
Elica

Elica Samurai Manual

22 September 2024
Elica

Elica Sora ESR436S1 Manual

20 September 2024
Elica

Elica Catania ECTX48SS Manual

14 September 2024

Emhætte Manualer

Nyeste Emhætte Manualer

Whirlpool

Whirlpool WSK64FLSX Manual

18 Juni 2025
Comfee

Comfee CHK 3.6J64A1W Manual

18 Juni 2025
Smeg

Smeg KBTU30X Manual

18 Juni 2025
Smeg

Smeg KBTU36X Manual

18 Juni 2025
Candy

Candy CDG6CBHT Manual

18 Juni 2025
Comfee

Comfee CHW 7.9M77A3 Manual

18 Juni 2025
Comfee

Comfee CHW 7.6M77A3 Manual

17 Juni 2025
Smeg

Smeg KPRU24X Manual

17 Juni 2025
Smeg

Smeg KBTU48X Manual

17 Juni 2025
Smeg

Smeg KPRU36X Manual

17 Juni 2025