2
GB | Powerbank
User manual:
Specications:
Capacity: 5 000 mAh (19.25 Wh)
Accumulator type: Li-Po 3.85 V
Max. input power: DC 5 V/2.4 A; 9 V/2 A; 12 V/1.5 A – 18 W
Max. output power: USB-C: DC 5 V/3 A; 9 V/2.22 A;
12 V/1.67 A – 20 W
Max. wireless output power: 15 W**
Dimensions: 103 × 67 × 12 mm
Weight: 120 g
Operating temperature: +5 °C ~ 40 °C
Charging time: 1.5–2 hours (approximately)*
* The above charging time may dier depending on ambient
conditions.
* USB power adapter not included.
* Valid when using a USB adapter or power supply providing max.
input current (PD 18 W or QC 3.0).
** Mag-Safe for iPhone =<7.5W
Instructions for use:
Battery status indicator of the power bank:
• To check the battery status of the powerbank, press the oval
button on the side of the powerbank.
• When the button is pressed, the current remaining capacity
of the power bank is displayed in the amount of LEDs (3)
Charging indicator
• During charging of the connected device, the number of
LEDs decreases.
• During charging, the number of LEDs increases.
• The LED farthest from the connector (4th LED) is green
during fast charging
Wireless charging:
• To start wireless charging, rst press the oval button on the
side of the powerbank and then touch the wireless device to
the side of the power bank with the magnet.
• If you also discharge the power bank simultaneously when
wired charging, the power of both wireless charging and
wired charging will be limited to max. 5 V/2 A = 10 W.
• If you charge Apple-branded products, such as the iPhone
12 or 13, wireless charging power is reduced to a maximum
of 7.5 W by the Apple device’s electronics.
• Unfortunately, this power bank is not compatible with the
Apple Watch.
• This power bank cannot be charged wirelessly, only dis-
charged.
• If your phone cover isn’t designed for wireless magSafe
charging by Apple, we recommend that you remove the cover
when charging wirelessly. This will achieve higher charging
eciency and reduce energy losses during power transfer.
