
GB | LED Plastic Flashlight
Light source: LED + SMD LED
Accumulator: 2× 2 000 mAh/3.7 V Li-ion 18650
Flashlight charging temperature: 0 °C to +40 °C
The ashlight‘s accumulator must be recharged before rst use. Charge the ashlight in dry indoor
areas at a temperature of 0 °C to +40 °C. If the ashlight is not used for an extended period of time,
it is necessary to recharge the accumulator before further use. The accumulator self-discharges
and must be recharged at least once every 3 months to prevent its voltage from dropping and the
accumulator potentially being rendered unusable. After recharging, disconnect the adapter from
the ashlight and the mains. Charging a fully depleted accumulator takes approximately 7 hours.
This function will make switching o a Work Light with multiple lighting modes much
easier. Simply use whichever lighting mode you need and then turn o the Work Light
when you‘re done with a single button press – no need to go through all the remaining
lighting modes to turn the Work Light o.
1. Turn on the Work Light.
2. Choose the lighting mode that suits you best.
3. The quick switch-o function automatically activates if the Work Light remains in the same
lighting mode for 10 seconds.
4. Afterwards, another press of the button automatically turns the Work Light o (skips the other
Rechargeable Battery Protection
A product with this function features protective circuits that prevent both overcharging
and excessive discharging of the accumulator that could lead to high temperatures,
sparking or explosion that would irreversibly damage or destroy the product.
• If water enters the interior of the ashlight, remove the accumulator and dry the interior of the
ashlight thoroughly. Do not under any circumstances use the ashlight.
Flashing, blikání, blikanie, miganie, villogás, utripanje,
treperenje, Blinken, мигання, clipire, mirgošana,
mirgėjimas, vilkumine, мигане