Epson PowerLite Pro Cinema 7100 Manual

Epson videoprojektorer PowerLite Pro Cinema 7100

Læs gratis den danske manual til Epson PowerLite Pro Cinema 7100 (122 sider) i kategorien videoprojektorer. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Epson PowerLite Pro Cinema 7100, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/122
Epson iProjection Operation Guide
(Windows/Mac)
3
Contents
Introduction to Epson iProjection.............................................................................................................. 7
Epson iProjection Features .................................................................................................................. 7
Connection to Various Devices........................................................................................................ 7
Four-Panel Display.......................................................................................................................... 8
Change Presenters and Projection Position .................................................................................... 9
Moderator Function ....................................................................................................................... 10
Screen Delivery and Thumbnail Display Function ......................................................................... 11
Easy Network Projection Using a USB Flash Drive (Windows Only) ............................................. 12
Setting Up the Software for the First Time .............................................................................................. 14
Installing the Software ........................................................................................................................ 14
Epson iProjection System Requirements ...................................................................................... 14
Epson iProjection Editions............................................................................................................. 16
Installing Epson iProjection (Windows).......................................................................................... 16
Installing Epson iProjection (Mac) ................................................................................................. 17
Selecting Projector Network Settings ................................................................................................. 17
Connection Methods for Various Network Environments .............................................................. 18
Recommended Wireless Environment for Multi PC Projection...................................................... 20
Setting Up a Projector to Connect in Quick Connection Mode....................................................... 20
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)............................... 21
Setting Up a Projector to Connect in Advanced Connection Mode (Wired) ................................... 23
Connecting to the Projector and Projecting Images .............................................................................. 25
Connection Methods .......................................................................................................................... 25
Connection Methods for Various Meeting Styles ........................................................................... 25
Connecting the Projector and a Computer Directly Using Wireless Communication ..................... 27
Connecting to the Projector from the Software over a Network System ........................................ 33
Selecting the Projector Search Method .............................................................................................. 37
Search Methods ............................................................................................................................ 38
Searching for Network Projectors Automatically............................................................................ 38
Searching for Network Projectors by Specifying an IP Address or Projector Name....................... 39
Searching for Network Projectors Using a Profile.......................................................................... 41
4
Profiles for Search .................................................................................................................... 41
Performing a Profile Search...................................................................................................... 41
Registering a Profile.................................................................................................................. 43
Exporting a Profile..................................................................................................................... 45
Importing a Profile..................................................................................................................... 45
Sharing a Profile over a Network............................................................................................... 46
Controlling the Projected Display ....................................................................................................... 47
Screen Types for Projection Control.............................................................................................. 47
Operating the Projected Display Status......................................................................................... 49
Changing the Number of Projected Panels.................................................................................... 49
Changing the Presenter................................................................................................................. 51
Changing the Projection Position................................................................................................... 52
Disconnecting..................................................................................................................................... 53
Using Additional Functions...................................................................................................................... 56
Searching for Network Projectors Using a Shortcut ........................................................................... 56
Creating a Shortcut........................................................................................................................ 56
Connecting to Network Projector Using a USB Flash Drive (Windows Only) ..................................... 57
Creating a USB key on a USB Flash Drive (Windows Only) .......................................................... 57
Using a USB Key to Connect a Windows Computer...................................................................... 58
Connecting to Multiple Projectors (Mirroring) ..................................................................................... 60
Outputting Audio from the Projector ................................................................................................... 61
Projecting Your Screen ...................................................................................................................... 62
Changing the Moderator..................................................................................................................... 63
Distributing the Projected Screen....................................................................................................... 65
Selecting the Participant's Screen to Project Using Thumbnails ........................................................ 66
Hiding the Projection Control Screen ................................................................................................. 67
Prohibiting Participant Operations...................................................................................................... 68
Controlling the Connection Bandwidth ............................................................................................... 69
Bandwidth Control Restrictions ..................................................................................................... 71
Solving Problems ...................................................................................................................................... 72
Solving Network Connection Problems .............................................................................................. 72
Solutions When You Cannot Connect Using Quick Connection Mode .......................................... 72
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wireless) . 73
5
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired)...... 75
Solving Problems During Projection................................................................................................... 77
Solutions When the Screen is Not Projected Properly................................................................... 77
Solutions When Audio is Not Played Properly ............................................................................... 78
Solutions When the Moderator Function Does Not Work .............................................................. 78
Solutions When the Projected Screen is Not Delivered ................................................................. 79
Error Messages List ........................................................................................................................... 79
Error Messages When Starting up Epson iProjection.................................................................... 79
Error Messages When Using a USB Key....................................................................................... 82
Error Messages When Searching for and Selecting Projectors ..................................................... 83
Error Messages When Projecting.................................................................................................. 84
Error Messages When Operating a Profile .................................................................................... 84
Error Messages When Using the Moderator Function................................................................... 85
Error Messages When Distributing the Projected Screen.............................................................. 86
Event ID List....................................................................................................................................... 86
Screen Summary ....................................................................................................................................... 89
Select Connection Mode Screen........................................................................................................ 90
Search Screen ................................................................................................................................... 91
Save Screen....................................................................................................................................... 94
Set options ......................................................................................................................................... 95
Set options - User Settings ............................................................................................................ 96
Set options - General settings ....................................................................................................... 97
Set options - Adjust performance ................................................................................................ 100
Set options - Audio Output........................................................................................................... 102
Set options - Deliver .................................................................................................................... 103
Toolbar............................................................................................................................................. 104
Projection Control Screen ................................................................................................................ 107
Thumbnail Screen ............................................................................................................................ 111
Viewer Screen.................................................................................................................................. 113
Appendix.................................................................................................................................................. 115
Updating and Uninstalling the Software ........................................................................................... 115
Getting the Latest Version of the Application............................................................................... 115
Uninstalling Epson iProjection (Windows Vista/Windows 7/Windows 10) ................................... 115
6
Uninstalling Epson iProjection (Windows 8.x) ............................................................................. 116
Uninstalling Epson iProjection (Mac)........................................................................................... 116
Supported Resolutions and Colors................................................................................................... 116
Supported Resolutions ................................................................................................................ 117
Display Color ............................................................................................................................... 117
Limitations ........................................................................................................................................ 118
Connection Limitations ................................................................................................................ 118
Limitations when Projecting from Windows Photo Gallery or Windows Live Photo Gallery ......... 119
Limitations in Windows Aero........................................................................................................ 119
Limitations when Projecting from Windows Media Center ........................................................... 120
Notices ............................................................................................................................................. 120
Copyright Notice.......................................................................................................................... 120
About Notations........................................................................................................................... 121
General Notice............................................................................................................................. 121
Copyright Attribution.................................................................................................................... 122
7
Introduction to Epson iProjection
See the information here to learn more about Epson iProjection software.
Epson iProjection Features
Epson iProjection Features
Epson iProjection is software that allows you to hold interactive meetings or lessons by projecting
images from network projectors. You can use a variety of display options for your environment.
Connection to Various Devices
Four-Panel Display
Change Presenters and Projection Position
Moderator Function
Screen Delivery and Thumbnail Display Function
Easy Network Projection Using a USB Flash Drive (Windows Only)
Parent topic: Introduction to Epson iProjection
Connection to Various Devices
You can connect up to 50 devices to a projector simultaneously, such as computers, smartphones and
tablets using Epson iProjection. (Up to four devices can project at one time.)
8
You can also hold remote meetings over a network by simultaneously projecting the same image on up
to four projectors on the network.
Parent topic: Epson iProjection Features
Related tasks
Connecting to Multiple Projectors (Mirroring)
Related topics
Connection Methods
Four-Panel Display
You can simultaneously display up to four screens in separate projected panels, which is useful in both
business and educational environments.
9
For example, you can compare and analyze data while simultaneously projecting screens from multiple
devices. In an educational environment, you can project lesson material on one part of the screen and
student answers on another to enhance the learning experience.
Parent topic: Epson iProjection Features
Related tasks
Changing the Number of Projected Panels
Change Presenters and Projection Position
Using Epson iProjection, you can easily change the screen being projected and the projection position
by simply dragging and dropping user names in panels on the projection control screen.
10
You can share the projector with other users on the same network without having to change cable
connections, allowing users to take turns giving presentations.
Note: Standard EditionThe projection control screen is available only on the of the software.
Parent topic: Epson iProjection Features
Related tasks
Changing the Presenter
Changing the Projection Position
Moderator Function
When using the moderator function, only one person plays a role of moderator who can control the
projected display. This function is suitable for meetings in which one user is the moderator and the other
users are participants, and the moderator must control the projected display.
This can also be useful in a classroom environment where the moderator must control the lesson without
interruption.
11
Note: This function is available only for supported models.
Parent topic: Epson iProjection Features
Related tasks
Changing the Moderator
Related topics
Connection Methods
Screen Delivery and Thumbnail Display Function
You can distribute the currently projected screen images to the participant's devices. The participants
can then add notes to the received images using drawing software, which the moderator can check as
12
thumbnails. This feature is suitable for environments where the moderator wants to provide questions for
the participants to answer, and then select which answers or ideas to project in response.
Note: This function is available only for supported models.
Parent topic: Epson iProjection Features
Related tasks
Distributing the Projected Screen
Selecting the Participant's Screen to Project Using Thumbnails
Easy Network Projection Using a USB Flash Drive (Windows Only)
You can use a commercially available USB flash drive as a USB key to transfer the projector's network
information to a Windows computer. Creating the USB key allows you to quickly project images from the
network projector.
13
When you change the presenter, you can switch the projected screen by inserting the USB key to a new
presenter's computer.
Note:
• This function is available only for supported models. See your projector User's Guide for more details.
• You cannot use the USB key as a projector's wireless LAN module.
Parent topic: Epson iProjection Features
Related topics
Connecting to Network Projector Using a USB Flash Drive (Windows Only)
14
Setting Up the Software for the First Time
Follow these instructions before connecting a computer to the projector over a network.
Installing the Software
Selecting Projector Network Settings
Installing the Software
Install Epson iProjection from the EPSON Projector Software CD-ROM supplied with your projector (if
available) or by downloading it from the Epson Web site.
Note:
• If the language selected for the installation differs from the language of the operating system being
used, the screens may not display correctly.
• If EasyMP Multi PC Projection is already installed on your computer, uninstall it first and then install
Epson iProjection.
Epson iProjection System Requirements
Epson iProjection Editions
Installing Epson iProjection (Windows)
Installing Epson iProjection (Mac)
Parent topic: Setting Up the Software for the First Time
Related tasks
Getting the Latest Version of the Application
Epson iProjection System Requirements
Your computer must meet the following system requirements to use the Epson iProjection software.
15
Requirement Windows Mac
Operating system Windows Vista
• Ultimate (32-bit)
• Enterprise (32-bit)
• Business (32-bit)
• Home Premium (32-bit)
• Home Basic (32-bit)
OS X
• 10.7.x (32- and 64-bit)
• 10.8.x (64-bit)
• 10.9.x (64-bit)
• 10.10.x (64-bit)
• 10.11.x (64-bit)
Windows 7
• Ultimate (32- and 64-bit)
• Enterprise (32- and 64-bit)
• Professional (32- and 64-bit)
• Home Premium (32- and 64-bit)
• Home Basic (32-bit)
• Starter (32-bit)
macOS
• 10.12.x (64-bit)
Windows 8
• Windows 8 (32- and 64-bit)
• Windows 8 Pro (32- and 64-bit)
• Windows 8 Enterprise (32- and 64-bit)
Windows 8.1
• Windows 8.1 (32- and 64-bit)
• Windows 8.1 Pro (32- and 64-bit)
• Windows 8.1 Enterprise (32- and 64-
bit)
Windows 10
• Windows 10 Home (32- and 64-bit)
• Windows 10 Pro (32- and 64-bit)
• Windows 10 Enterprise (32- and 64-
bit)
16
Requirement Windows Mac
CPU Intel Core2Duo or faster
(Intel Core i5 or faster recommended)
Memory 2GB or more
(4GB or more recommended)
Hard disk space 50 MB or more
Display Resolution between 800 × 600 (SVGA) and 1920 × 1200 (WUXGA)
16-bit color or greater (approximately 32,000 display colors)
Note:
• Operation is not guaranteed for Windows Vista without any service packs installed, or Windows Vista
Service Pack 1.
• Operation is not guaranteed for Windows 7 without any service packs installed.
Parent topic: Installing the Software
Epson iProjection Editions
You can choose the software edition to install that suits your role in the projection environment.
•Standard Edition
You can use all functions of Epson iProjection.
You can control the projected image and also function as a moderator.
•Participant Edition
You can connect to the projector only as a participant of the moderator function and cannot control the
projected images.
Parent topic: Installing the Software
Installing Epson iProjection (Windows)
Install Epson iProjection on your computer.
Note: You need administrator authority to install the software.
17
1. Turn on your computer.
2. Make sure all running applications are closed.
3. Do one of the following:
• Insert the EPSON Projector Software CD-ROM into the computer (if available) and continue with
these steps.
• If you downloaded the software from the Epson Web site, follow the on-screen instructions to
install the software.
The installer starts automatically.
4. If the installer does not start automatically, open the CD-ROM drive from (orMy Computer
Computer iProjection_Inst.exe), and then double-click .
5. Follow the on-screen instructions to install.
Parent topic: Installing the Software
Installing Epson iProjection (Mac)
Install Epson iProjection on your computer.
1. Turn on your computer.
2. Make sure all running applications are closed.
3. Do one of the following:
• Insert the EPSON Projector Software CD-ROM into the computer (if available) and continue with
these steps.
• If you downloaded the software from the Epson Web site, follow the on-screen instructions to
install the software.
4. Double-click the icon in the EPSON window.iProjectionInstaller.pkg
Installation starts.
5. Follow the on-screen instructions to install.
Parent topic: Installing the Software
Selecting Projector Network Settings
Follow these instructions to select a connection method between a computer and the projector, and then
set up the projector.
Connection Methods for Various Network Environments
18
Recommended Wireless Environment for Multi PC Projection
Setting Up a Projector to Connect in Quick Connection Mode
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
Parent topic: Setting Up the Software for the First Time
Connection Methods for Various Network Environments
You can choose a connection mode to suit your network environment.
Check how the projector is connected to the network system (wireless or wired) and the communication
path from the computer to the projector.
Depending on your projector, some connection methods may not be available. See your projector User's
Guide for more details.
• To connect the projector to the computer directly using wireless communication: Use Quick
Connection Mode.
19
• To connect the projector to the computer using a wireless network system: Use Advanced
Connection Mode.
• To connect the projector to the computer using a wired network system: Use Advanced Connection
Mode.
Parent topic: Selecting Projector Network Settings
20
Recommended Wireless Environment for Multi PC Projection
When you connect multiple devices to a projector using the Quick connection mode, we recommend
limiting the number of devices to six or less to maintain the projection performance. The number of
devices that can connect to a projector at the same time differs depending on the wireless
communication environment.
When you connect a projector to a wireless LAN and connect multiple devices wirelessly using the
Advanced connection mode, note the following recommendations.
• Set up multiple access points so that one of the access points can connect up to 10 or 20 devices. See
the access point manual for more information on the maximum number of devices that can be
connected.
• When you use multiple access points, assign a different channel to each access point, and use
different access points for the projector connection and the computer connection.
• Use a wireless LAN controller, if possible, to enhance the connection stability.
• Use an access point that supports 802.11n.
Contact your network administrator for help in setting up the wireless environment.
Note: If your projector supports a wired LAN connection, we recommend using a wired LAN connection
when you connect multiple devices to the projector.
Parent topic: Selecting Projector Network Settings
Setting Up a Projector to Connect in Quick Connection Mode
To connect a computer directly to the projector using wireless communication, you need to select
network settings on the computer and the projector.
1. Select the necessary settings to connect your computer to a wireless LAN. See the documentation
supplied with your computer for more details.
2. Install the wireless LAN unit in the projector, if necessary. See your projector forUser's Guide
instructions.
3. Turn on the projector.
4. Press the button on the remote control or the control panel, select the menu, andMenu Network
select .Network Configuration
5. Select .Wireless LAN
21
A screen like one of the following is displayed.
6. Turn on wireless LAN support.
Note: The necessary settings vary depending on your projector. See your projector forUser's Guide
instructions.
7. Select for .Quick Connection Mode
8. Select other options as necessary for your network. See your projector for instructions.User's Guide
9. Select security settings on the menu as necessary for your network. Check with yourSecurity
network administrator for more information on making the correct settings.
10. When you have finished making settings, select or and follow the on-Setup Complete Complete
screen instructions to save your settings and exit the menus.
Parent topic: Selecting Projector Network Settings
Related tasks
Connecting the Projector and a Computer Directly Using Wireless Communication
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
To connect a computer to the projector over a wireless LAN, you need to select network settings on the
computer and the projector.
1. Contact your network administrator and write down the settings for the access point, such as the
SSID and security settings.
22
2. Connect the computer to the network.
Note: To set up a network connection, if necessary, see the documentation supplied with your
computer or network adapter.
3. Install the wireless LAN unit in the projector, if necessary. See your projector forUser's Guide
instructions.
4. Turn on the projector.
5. Press the button on the remote control or the control panel, select the menu, andMenu Network
then select .Network Configuration
6. Select .Wireless LAN
A screen like one of the following is displayed.
7. Turn on wireless LAN support.
Note: The necessary settings vary depending on your projector. See your projector forUser's Guide
instructions.
8. Select for .Advanced Connection Mode
9. Select other options as necessary for your network. See your projector for instructions.User's Guide
10. Select security settings on the menu as necessary for your network. Check with yourSecurity
network administrator for more information on making the correct settings.
11. When you have finished making settings, select or , and follow the on-Setup Complete Complete
screen instructions to save your settings and exit the menus.
23
Parent topic: Selecting Projector Network Settings
Related tasks
Connecting to the Projector from the Software over a Network System
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
To connect a computer to the projector using a wired LAN, you need to select network settings on the
computer and the projector.
1. Contact your network administrator and check that DHCP is available under the current network
environment.
Note: If DHCP is not available, write down the following values that are available for your projector.
• IP Address
• Subnet Mask
• Gateway Address
2. Connect the computer to the network.
Note: To set up a network connection, if necessary, see the documentation supplied with your
computer or network adapter.
3. Connect a LAN cable to the projector.
4. Turn on the projector.
5. Press the button on the remote control or the control panel, select the menu, andMenu Network
select .Network Configuration
6. Select .Wired LAN
24
A screen like one of the following is displayed.
7. Select IP settings as necessary.
• DHCP is available: Set to .DHCP On
• DHCP is not available: Set to and enter the projector's IP Address, Subnet Mask, andDHCP Off
Gateway Address values as necessary.
8. When you have finished making settings, select or , and follow the on-Setup Complete Complete
screen instructions to save your settings and exit the menus.
Parent topic: Selecting Projector Network Settings
Related tasks
Connecting to the Projector from the Software over a Network System
25
Connecting to the Projector and Projecting Images
Follow these instructions to connect the computer and the projector over a network, and to project
images from your computer's screen using the projector.
Make sure you have already set up the software and selected a connection mode for the projector.
Connection Methods
Selecting the Projector Search Method
Controlling the Projected Display
Disconnecting
Related topics
Installing the Software
Selecting Projector Network Settings
Connection Methods
You can select a suitable method to connect the computer and the projector over a network depending
on your meeting style.
Connection Methods for Various Meeting Styles
Connecting the Projector and a Computer Directly Using Wireless Communication
Connecting to the Projector from the Software over a Network System
Parent topic: Connecting to the Projector and Projecting Images
Connection Methods for Various Meeting Styles
You can choose a connection method to suit the style of your meeting.
Decide how you want to hold your meeting. Depending on the connection method you selected, the
connection procedure differs.
26
Note: Depending on your projector, some connection methods may not be available. See your projector
User's Guide for more details.
• All users can control the projected display and become presenters. (Holding discussions and
interacting with other users in a business environment.)
27
• Only one user is the moderator and has full control over the meeting using the moderator function.
(Holding a class or lesson using the participants' computer screens in an educational environment.)
Note: To start a meeting using the moderator function, one user must connect to the projector as the
moderator and the other users must connect to the projector as participants.
Parent topic: Connection Methods
Related tasks
Changing the Moderator
Connecting to the Projector from the Software over a Network System
Connecting the Projector and a Computer Directly Using Wireless Communication
When your projector is set up as indicated below, you can connect the projector and a computer directly
using wireless communication to project the computer's screen.
• The wireless LAN unit is installed in the projector or the projector has built-in wireless LAN modules.
• The projector's connection method is set to .Quick
28
Note:
• When you use the of the software, you must connect the projector and aParticipant Edition
computer over a network system.
• When you connect the projector and a computer directly using wireless communication, the
connection between the computer and an access point is disconnected.
• Make sure you turn on your computer's wireless communication function.
1. Press the button or button on the remote control to switch the input source toLAN Source Search
LAN.
The LAN standby screen is projected.
2. Start Epson iProjection.
• and : Click , select (or ),Windows Vista Windows 7 Start Programs All Programs EPSON
Projector Epson iProjection Epson iProjection Ver.X.XX, , and then click .
• and : Navigate to the screen and selectWindows 8 Windows 8.1 Apps Epson iProjection
Ver.X.XX.
• : Select , , and then select .Windows 10 Start EPSON Projector Epson iProjection
• : Double-click from the folder.Mac Epson iProjection Applications
Note: You can also create a shortcut and use it to start Epson iProjection and to automatically
search for saved projectors.
29
3. Select , and then click .Quick Connection Mode OK
4. Search for the projector using one of the following methods.
• : Searches for the projector automatically.Automatic Search
• : Searches for the projector based on a previously saved profile.Profile
The projector search results are displayed.
5. Select the projector you want to connect to from the , and then select one of theProjector List
following options.
• You want all users to be able to become participants in the moderator function: Make sure
Connect as a Moderator, or disable interrupt connections Joinis not selected, and then click .
30
• You are the moderator user and you do not want other users to be able to interrupt the moderator
presentation: Select , and then clickConnect as a Moderator, or disable interrupt connections
Join.
Note:
• The moderator function is available only for supported models and is available only on the
Standard Edition of the software.
• When one user connects as a moderator, the moderator function turns on.
When the is set to or the is set in the projectorProjector Keyword On Moderator Password
settings, the keyword entry screen is displayed.
6. Enter the Projector Keyword displayed on a screen, and then press .OK
31
7. When the following dialog box is displayed, enter the passphrase set on the projector, and then click
Connect.
Note: Save the passphrase and don't show this dialog box againIf you select , the projector's
SSID and passphrase are saved on the computer and this dialog box is not displayed the next time
you connect. You do not have to enter the passphrase again.
32
If the projector's passphrase has not been changed from the default, the following dialog box is
displayed. Change the passphrase from the projector's menu.Network
When a connection is established, the computer screen is projected and the following toolbar is
displayed on the computer screen.
The computer screen for the user who connects first is projected in full screen mode. Users who connect
later can project their own screen by clicking the button on the toolbar or can control the projected
display from the projection control screen by clicking the button on the toolbar.
Note:
• When a connection is established, the input source for the projector automatically switches to the LAN
source if no other signal is being input. If the input source does not automatically switch to the LAN
source, press the button or button on the remote control.LAN Source Search
• The displayed toolbar varies depending on the connection method and the edition of the software.
33
• When using the moderator function, only the moderator can control the projected display.
Parent topic: Connection Methods
Related tasks
Setting Up a Projector to Connect in Quick Connection Mode
Disconnecting
Related topics
Selecting the Projector Search Method
Controlling the Projected Display
Searching for Network Projectors Using a Shortcut
Connecting to the Projector from the Software over a Network System
When your projector is set up as indicated below, you can connect the projector and a computer over a
network by using Epson iProjection.
• The wireless LAN unit is installed if a projector does not have built-in wireless LAN modules (wireless
networks only).
• A LAN cable is connected to the projector (wired networks only).
• The projector's connection method is set to .Advanced
Note: Make sure you also connected a computer to the network.
1. Press the button or button on the remote control to switch the input source toLAN Source Search
LAN.
34
The LAN standby screen is projected.
2. Start Epson iProjection.
• and : Click , select (or ),Windows Vista Windows 7 Start Programs All Programs EPSON
Projector Epson iProjection Epson iProjection Ver.X.XX, , and then click .
• and : Navigate to the screen and selectWindows 8 Windows 8.1 Apps Epson iProjection
Ver.X.XX.
• : Select , , and then select .Windows 10 Start EPSON Projector Epson iProjection
• : Double-click from the folder.Mac Epson iProjection Applications
Note: You can also create a shortcut and use it to start Epson iProjection and to automatically
search for saved projectors.
35
3. Select , and then click .Advanced Connection Mod e O K
4. Search for the projector using one of the following methods.
• : Searches for the projector automatically.Automatic search
• : Searches for the projector based on a specified IP address or projector name.Manual search
• : Searches for the projector based on a previously saved profile.Profile
The projector search results are displayed.
5. Select the projector you want to connect to from the , and then select one of theProjector List
following options.
• You want all users to be able to become participants in the moderator function: Make sure
Connect as a Moderator, or disable interrupt connections Joinis not selected, and then click .
36
• You are the moderator user and you do not want other users to be able to interrupt the moderator
presentation: Select , and then clickConnect as a Moderator, or disable interrupt connections
Join.
Note:
• The moderator function is available only for supported models and is available only on the
Standard Edition of the software.
• When one user connects as a moderator, the moderator function turns on.
When the is set to or the is set in the projectorProjector Keyword On Moderator Password
settings, the keyword entry screen is displayed.
6. Enter the Projector Keyword displayed on a screen, and then press .OK
When a connection is established, the computer screen is projected and the following toolbar is
displayed on the computer screen.
37
The computer screen for the user who connects first is projected in full screen mode. Users who connect
later can project their own screen by clicking the button on the toolbar or can control the projected
display from the projection control screen by clicking the button on the toolbar.
Note:
• When a connection is established, the input source for the projector automatically switches to the LAN
source if no other signal is being input. If the input source does not automatically switch to the LAN
source, press the button or button on the remote control.LAN Source Search
• The displayed toolbar varies depending on the connection method and the edition of the software.
• When using the moderator function, only the moderator can control the projected display.
Parent topic: Connection Methods
Related tasks
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
Disconnecting
Related topics
Selecting the Projector Search Method
Controlling the Projected Display
Searching for Network Projectors Using a Shortcut
Selecting the Projector Search Method
You can select a suitable method to search for a projector depending on the status or location of the
projector you want to connect to.
Search Methods
Searching for Network Projectors Automatically
Searching for Network Projectors by Specifying an IP Address or Projector Name
Searching for Network Projectors Using a Profile
Parent topic: Connecting to the Projector and Projecting Images
38
Search Methods
You can use one of the following methods to search for the projector you want to connect to. Choose the
best method depending on your environment.
• Searching for Network Projectors Automatically
You can automatically search for available projectors on the network.
Search results differ depending on the connection mode you use.
• : Displays the SSID for available projectors.Quick Connection Mode
• : Displays available projectors on the network. Searches areAdvanced Connection Mode
performed only on the same subnet. Projectors on different subnets are not displayed in the search
results.
• Searching for Network Projectors by Specifying an IP Address or Projector Name
If the projector you want to connect to is not found automatically, you can search for the target
projector by specifying the IP address or a projector name. By specifying the IP address, you can also
search for the projector at remote locations on a different subnet.
• Searching for Network Projectors Using a Profile
You can save network projector information as a profile, and then specify the profile to search for the
same projector instead of providing projector details each time you search. By creating a group of
profiles for each place where a projector is setup and managing them with folders, the target projector
can be found quickly.
Parent topic: Selecting the Projector Search Method
Searching for Network Projectors Automatically
You can automatically search for available projectors on the network, and then project images by simply
selecting the projector.
39
Click on the search screen.Automatic search
The search results are displayed.
When you click , the latest information is displayed.Refresh
If you cannot find any projectors, try one of the other search methods.
Parent topic: Selecting the Projector Search Method
Related concepts
Search Methods
Related tasks
Searching for Network Projectors by Specifying an IP Address or Projector Name
Related topics
Searching for Network Projectors Using a Profile
Searching for Network Projectors by Specifying an IP Address or Projector Name
If the projector you want to connect to is not found automatically, you can search for the target projector
by specifying the IP address or the projector name.
Note: Manual Search Advanced Connection Modeis available only in .
40
1. Click on the search screen.Manual search
2. Enter the IP address or the projector name for the projector you want to connect to, and then click
Search.
41
The search results are displayed.
Parent topic: Selecting the Projector Search Method
Searching for Network Projectors Using a Profile
You can save network projector information as a profile, and then search for the same projector using
the profile instead of specifying the projector details each time.
Profiles for Search
Performing a Profile Search
Registering a Profile
Exporting a Profile
Importing a Profile
Sharing a Profile over a Network
Parent topic: Selecting the Projector Search Method
Profiles for Search
You can save information for a network projector as a profile. A profile is a file containing all of the
projector's information, such as the projector name, IP address, and SSID. By using a profile, you can
easily search for saved projectors instead of providing projector details.
You can export the registered profile to create a backup, and then import it locally to easily search for
projectors on another computer. You can also share the exported profile over a network, allowing other
users to easily search for projectors.
Parent topic: Searching for Network Projectors Using a Profile
Performing a Profile Search
You can specify the profile to search for the saved projector instead of providing projector details each
time you search.
42
1. Click on the search screen.Profile
2. Double-click the folder or the projector icon for the profile you want to use from the list.
The search results are displayed.
43
Parent topic: Searching for Network Projectors Using a Profile
Related tasks
Registering a Profile
Registering a Profile
After searching for a projector, you can save the projector details as a profile using a memorable name
that you can search for easily later.
Note: Shared ProfileYou cannot register a profile under the folder on the search screen.
1. While the projectors are displayed on the search screen, perform one of the following operations.
• Register projectors displayed in the : Click .List of Connected Projectors Register
• Register a specific projector: Right-click the projector you want to register in the ,Projector List
and then click .Add Item to Profile
• Register all projectors found by the search: Right-click one of the projectors in the ,Projector List
and then click .Add All to Profile
The screen is displayed.Save
44
2. Enter the , and select the folder where you want to save the profile, and thenProjector file name
click .OK
The profile is registered and the projector information is saved in the profile.
Note:
• The folder structure can be six folders deep.
• Click if you want to create a new folder.Create New folder
• To register a specific projector, you can drag and drop the projector from the to theProjector List
folder under .Profile
• You can drag and drop profiles and folders to change the folder structure.
Parent topic: Searching for Network Projectors Using a Profile
45
Exporting a Profile
You can export a profile and share it with other users allowing them to easily search for projectors and
join a meeting.
Note: Shared ProfileYou cannot export the profiles under the folder on the search screen.
1. On the search screen, right-click the folder containing the profile you want to share under ,Profile
and then click .Export
The screen is displayed.Save As
2. Select where you want to save the profile (.mplist), and then click .Save
The profile is exported.
Parent topic: Searching for Network Projectors Using a Profile
Related tasks
Registering a Profile
Importing a Profile
Sharing a Profile over a Network
Importing a Profile
You can locally import an exported profile and use it to easily search for projectors and join a meeting.
Note:
• You can also import a profile (.plist) exported using EasyMP Network Projection.
• You cannot import profiles under the folder on the search screen.Shared Profile
• You cannot import profiles created in a different connection mode.
1. On the search screen, right-click the folder to which you want to import the profile under , andProfile
then click .Import
The screen is displayed.Open
2. Select the profile (.mplist), and then click .Open
The profile is imported locally.
Parent topic: Searching for Network Projectors Using a Profile
Related tasks
Exporting a Profile
46
Sharing a Profile over a Network
You can share an exported profile with other users over a network so that any changed projector
information is easily updated. The shared profile is read and updated automatically when Epson
iProjection is started.
1. Place the profile (.mplist) in a shared network location such as a server.
2. Click on the search screen.Set options
The screen is displayed.Set options
3. Click the tab.User Settings
4. Enter the network location or URL to the shared profile (including the name of the profile) in Shared
Profile Name.
• For a file server (Windows only): \\xxxxx\xxxxx.mplist
• For a web server: http://xxxxx/xxxxx.mplist
47
5. Click .OK
The shared profile is read and the screen closes.Set options
Note: The shared profile is read only and cannot be edited in Epson iProjection.
Parent topic: Searching for Network Projectors Using a Profile
Related tasks
Exporting a Profile
Controlling the Projected Display
Follow these instructions to use the toolbar and the projection control screen to control the screen being
projected.
Screen Types for Projection Control
Operating the Projected Display Status
Changing the Number of Projected Panels
Changing the Presenter
Changing the Projection Position
Parent topic: Connecting to the Projector and Projecting Images
Screen Types for Projection Control
You can choose the type of screen you use to control projected images to suit your situation. You can
switch the screen type by clicking the button on the toolbar or the button on the projection control
screen.
Note:
• The displayed toolbar and the projection control screen vary depending on the connection method and
the edition or your role of this software.
48
• The projection control screen is available only on the of the software.Standard Edition
• Use the toolbar to display a wide image of the projected display and perform operations on the
projected image.
• Use the projection control screen to change the number of projected panels, presenters, or the
projection position.
Parent topic: Controlling the Projected Display
Related references
Toolbar
Projection Control Screen
49
Operating the Projected Display Status
You can control the projected display while projecting your computer screen by starting, stopping, or
pausing the projected image.
Perform one of the following operations on the toolbar or the projection control screen.
• : Click the button.Show
The computer screen is projected as it is.
• : Click the button.Stop
The projected image stops. A black screen is projected while stopped.
• : Click the button.Pause
The projected image pauses. The paused image is projected, even if you make changes on the
computer screen.
Note:
• These buttons are not available for participants when using the moderator function.
• The moderator can also control the other users' projection using the projection control screen when
using the moderator function.
Parent topic: Controlling the Projected Display
Related references
Projection Control Screen
Changing the Number of Projected Panels
You can divide the projected display into a maximum of four panels. By changing the number of panels,
you can project screens from multiple devices at the same time, or project one computer screen in full
screen mode.
Note:
• This function is not available for participants when using the moderator function.
• You can also use the button to project your computer screen in full screen mode.
1. Click the button on the toolbar.
50
The projection control screen is displayed.
2. Click the panel of the user to be projected in the projection area.
The selected panel is framed in blue.
3. Perform one of the following operations to change the number of available panels in the projection
area.
• Project one panel in full screen mode: Click the button.
• Split the projected display in two and projecting the selected panel and the adjacent right or left
panel: Click the button.
• Split the projected display in four and projecting the all four panels: Click the button.
The number of panels changes and the background color for panels being projected becomes white.
Note:
• You can also change the number of panels by right-clicking in the projection area. Right-click the
panel, and then select the number of total panels.
51
• If there is no user in a white panel, a black screen is projected.
• The background color for panels not being projected is gray.
Parent topic: Controlling the Projected Display
Related references
Projection Control Screen
Changing the Presenter
You can change the presenter by dragging and dropping one of the connected user names in the list
onto a panel in the projection area.
Note: This function is not available for participants when using the moderator function.
1. Click the button on the toolbar.
The projection control screen is displayed.
2. Select the user names in the user list, and then drag and drop the user name onto a white panel in
the projection area.
52
Note:
• The moderator can check the participant's device screens as thumbnails and select which user to
project. Click the button on the toolbar or the projection control screen.
• If you cannot find the user that you want to project in the user list, you can search for them using
the user search box.
• You can also right-click a user name in the user list to select the projection position.
• If there is no user in a white panel, a black screen is projected.
The selected user's computer screen is projected.
3. To finish projecting, drag and drop the user name from the projection area to the user list.
Note: You can also finish the selected user's projection by right-clicking the panel in the projection
area, and then clicking .End Projection
The background color of the user name in the user list is blue while their screen is projected. The
background color of the user name is gray when a user is in the panel but their screen is not being
projected.
Parent topic: Controlling the Projected Display
Related tasks
Changing the Projection Position
Selecting the Participant's Screen to Project Using Thumbnails
Changing the Projection Position
You can change the projection position by dragging and dropping the user name from one position to
another in the projection area.
Note: This function is not available for participants when using the moderator function.
1. Click the button on the toolbar.
The projection control screen is displayed.
53
2. Select the user in the projection area, and then drag and drop the user name into another position.
The projection position is changed.
Note: When the or button is selected, you can drag and drop the user name in a gray panel to the
white panel to switch the image being projected. If you drag and drop the user name in a white panel to
the gray panel, the image for that user will not be projected.
Parent topic: Controlling the Projected Display
Related tasks
Changing the Number of Projected Panels
Disconnecting
You can disconnect one computer or all devices from the projector when you finish projecting.
1. Perform one of the following operations.
• Disconnect your computer and the projectors: Click the button on the toolbar.Leave
54
The connection between your computer and the projectors is ended.
Note:
• When you are the moderator, the button is displayed on the toolbar instead ofDisconnect All
this button.
• You can also disconnect by clicking from the menu on the projection controlLeave Disconnect
screen.
• The moderator can disconnect other participants by right-clicking the selected user in the user
list, and then clicking on the projection control screen when using the moderatorLeave
function.
• When the moderator leaves the meeting, the moderator function turns off.
• Disconnect all devices from the projectors: Click the button on the toolbar, and then click
Disconnect All Disconnectfrom the menu on the projection control screen.
55
The connection between all devices and projectors participating in the meeting is ended.
Note: This function is not available for participants when using the moderator function.
The confirmation screen is displayed.
2. Click .OK
You are returned to the search screen.
Parent topic: Connecting to the Projector and Projecting Images
56
Using Additional Functions
Follow these instructions to use additional Epson iProjection functions that may be useful during a
meeting.
Searching for Network Projectors Using a Shortcut
Connecting to Network Projector Using a USB Flash Drive (Windows Only)
Connecting to Multiple Projectors (Mirroring)
Outputting Audio from the Projector
Projecting Your Screen
Changing the Moderator
Distributing the Projected Screen
Selecting the Participant's Screen to Project Using Thumbnails
Hiding the Projection Control Screen
Prohibiting Participant Operations
Controlling the Connection Bandwidth
Related topics
Connection Methods
Selecting the Projector Search Method
Searching for Network Projectors Using a Shortcut
You can save network projector information as a shortcut, and then double-click it to start Epson
iProjection. This allows you to easily search for the same projectors instead of specifying the projector
details each time.
Creating a Shortcut
Parent topic: Using Additional Functions
Creating a Shortcut
After searching for a projector, you can save the projector details as a shortcut that you can use later. A
shortcut contains all of the projector's information, such as the projector name and IP address. Creating
a folder shortcut saves information for multiple projectors contained in the folder.
1. On the search screen, right-click the projector or folder from the or , and thenProfile Projector List
click .Create Shortcut
The screen is displayed.Save As
57
2. Select where you want to save the shortcut (.pme), and then click .Save
The shortcut is created and the projector information is saved in the shortcut.
Note:
• Double-clicking a shortcut (.pme), you can start Epson iProjection in the same mode as you created its
shortcut.
• When you use the of the software, use a shortcut file created inParticipant Edition Advanced
Connection Mode.
• You can also select the projector or folder from the or , and then drag and dropProfile Projector List
to the location where you want to create the shortcut.
Parent topic: Searching for Network Projectors Using a Shortcut
Connecting to Network Projector Using a USB Flash Drive (Windows Only)
You can use a commercially available USB flash drive as a USB key to transfer the projector's network
information to a Windows computer. Creating the USB key allows you to quickly project images from the
network projector.
Creating a USB key on a USB Flash Drive (Windows Only)
Using a USB Key to Connect a Windows Computer
Parent topic: Using Additional Functions
Creating a USB key on a USB Flash Drive (Windows Only)
You can create a USB key on a commercially available USB flash drive so you can use it to connect to
your projector wirelessly.
Note: When creating a USB key, make sure you use a USB flash drive that meets the following
conditions.
• Formatted to FAT
• No security functions
We recommend deleting any files on the drive before creating a USB key.
1. Start .USB Key Setup Tool
• and : Click , select (or ),Windows Vista Windows 7 Start Programs All Programs EPSON
Projector Epson iProjection Tools USB Key Setup Tool, , , and then click .
58
• and : Navigate to the screen and select .Windows 8 Windows 8.1 Apps USB Key Setup Tool
• : Select , , , , and then selectWindows 10 Start EPSON Projector Epson iProjection Tools USB
Key Setup Tool.
2. Select the application type that starts when you insert the USB key to your computer.
3. Insert an empty USB flash drive directly to your computer's USB port.
4. Follow the on-screen instructions to create the USB key.
USB key creation begins and the software writes a file to the USB flash drive.
Caution: Do not remove the USB flash drive from the computer during USB key creation. If you
remove the drive, the USB key may not be created correctly. If USB key creation fails, create the
USB key again.
Note: If there are multiple USB flash drives connected to your computer, follow the on-screen
instructions to specify the drive for which you want to create a USB key.
5. Select in the Windows taskbar, and then remove the USB flash drive.Safely Remove Hardware
You can now use the USB flash drive as a USB key.
Parent topic: Connecting to Network Projector Using a USB Flash Drive (Windows Only)
Related concepts
Epson iProjection Editions
Using a USB Key to Connect a Windows Computer
After creating the USB key, you can quickly project images from the network projector. If you have
previously used the USB key, you can use the network projector by simply connecting the USB key to
your computer.
1. Make sure your projector is using one of the following network connections:
• The wireless LAN module is installed or built into your projector.
• A wired LAN cable is connected to your projector.
2. Turn on the projector.
3. Press the button or button on the remote control to switch the input source toLAN Source Search
LAN.
The LAN standby screen is projected.
59
4. Verify that an SSID and IP address are displayed.
5. Insert the USB key into the projector's port.USB Type A
Note: The location of the USB Type A port varies depending on your projector. See your projector
User's Guide for more details.
You see a projected message that the network information update is complete.
6. Remove the USB key.
7. Insert the USB key into a USB port on your computer.
Note: Run MPPLaunch.exeIn Windows Vista, if the AutoPlay window is displayed, select , then
select .Allow
8. Follow the on-screen instructions to install Epson iProjection.
Note:
• If the Windows Firewall message is displayed, click to disable the firewall.Yes
• You need administrator authority to install the software.
• If it is not installed automatically, double-click MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector.
Note: If you want to switch the presentation to your computer, click the button on the toolbar.
9. When you have finished projecting wirelessly, select in the WindowsSafely Remove Hardware
taskbar, and then remove the USB key from your computer.
Note:
• You can share the USB key with other users without disconnecting your computer. To do this,
deselect the checkbox on theQuit application when removing the USB key Set options
screen in Epson iProjection.
• You may need to restart your computer to reactivate your wireless LAN connection.
Parent topic: Connecting to Network Projector Using a USB Flash Drive (Windows Only)
60
Connecting to Multiple Projectors (Mirroring)
Connecting to multiple projectors and projecting the same image is known as mirroring. You can perform
mirroring with up to four projectors.
Note:
• Mirroring is available only in .Advanced Connection Mode
• For best results, we recommend that you connect the projector to a wired LAN to perform mirroring.
61
On the search screen, select up to four projectors you want to connect to, and then click .Join
A projector mirroring group is formed and the same image is projected from multiple projectors.
Note:
• When you select one projector from a projector mirroring group, all of the projectors in that group are
selected.
• When other users are already connected to a projector in a mirroring group, you can only select
another projector from the same mirroring group. You cannot select a projector that is not in a
mirroring group.
Parent topic: Using Additional Functions
Outputting Audio from the Projector
You can output audio from the projector only when one computer is connected to one projector, and you
are projecting in full screen mode.
1. Click on the search screen.Set options
The screen is displayed.Set options
2. Click the tab.Audio Output
62
3. Select , and then click .Output audio from the projector OK
Note: Use Bandwidth Adjust performanceWhen you select 256Kbps or 512Kbps as on the tab,
you cannot output audio from the projector and cannot select this setting.
The screen closes.Set options
Parent topic: Using Additional Functions
Related tasks
Projecting Your Screen
Controlling the Connection Bandwidth
Projecting Your Screen
You can project the computer screen in full screen mode without projecting any other users' screens.
1. On the search screen, select the projector you want to connect to, and then click .Join
63
The toolbar is displayed.
2. Click the button.
Note:
• You can also use the button on the projection control screen.
• This button is not available for participants when using the moderator function.
Your computer screen is projected in full screen mode.
Parent topic: Using Additional Functions
Changing the Moderator
While using the moderator function, you can change the moderator when another user needs to control
the projected display.
Note: Standard EditionThe moderator function is available only on the of the software.
1. On the search screen, select the projector you want to connect to, select Connect as a Moderator,
or disable interrupt connections Join, and then click .
The moderator function turns on and the toolbar is displayed.
2. Click the button on the toolbar.
The projection control screen is displayed.
64
3. Click the button on the moderator's computer.Quit as Moderator
The confirmation screen is displayed.
4. Click .OK
The moderator function turns off.
65
5. Click the button on the projection control screen on a different user's computer.Become Moderator
The confirmation screen is displayed.
6. Click .OK
The moderator function turns back on and the new moderator can control the projected display.
Parent topic: Using Additional Functions
Related concepts
Connection Methods for Various Meeting Styles
Distributing the Projected Screen
The moderator can distribute the currently projected screen images to the participant's devices.
1. Click the button on the toolbar or the projection control screen.
Note: DeliverYou can also deliver a blank screen. Click the button on the toolbar, and then click
Blank Screen Toolfrom the menu.
66
You see the confirmation screen.
2. Click .Start
The button and the button appear on the computer screen.
3. Click the button.
When the screen distribution succeeds, the moderator sees a completion message and the distributed
image automatically appears in the Viewer on the participant's devices.
Parent topic: Using Additional Functions
Related references
Viewer Screen
Selecting the Participant's Screen to Project Using Thumbnails
The moderator can check the participant's device screens as thumbnails and select which user to
project.
1. Click the button on the toolbar or the projection control screen.
The thumbnails screen is displayed.
2. Select up to 12 thumbnails you want to project.
• To update to the latest thumbnails, click the button.
67
• To clear all selections, click . If you click this again, the previously selected thumbnails are
selected again.
• To switch the size and the number of thumbnails displayed on one page, click the or
button.
3. Click the button.
Note: When you select more than 5 thumbnails, the thumbnail selection screen appears. After
selecting up to 4 thumbnails, you must click the button again.
The selected thumbnails are projected. Click the button to close the thumbnails screen and return
to the toolbar or the projection control screen.
Parent topic: Using Additional Functions
Hiding the Projection Control Screen
You can hide the projection control screen from other users while projecting your computer screen. This
allows you to change the necessary settings without projecting the operation. The projected image
currently displayed is paused automatically when you switch the toolbar to the projection control screen.
Your computer screen is projected again when you return to the toolbar.
Note: This function is available only for the moderator when using the moderator function.
1. Click on the search screen.Set options
The screen is displayed.Set options
2. Click the tab.General settings
68
3. Select , and then click .Freeze projected screen when displaying Projection control screen OK
The screen closes. The operation on the projector control screen will not be projected nextSet options
time you use it.
Parent topic: Using Additional Functions
Prohibiting Participant Operations
The moderator can lock mouse operations on participant's devices so that the participant cannot change
the images being projected.
• Click the button on the projection control screen to lock the participant's mouse operations.
The button changes to the button on the projection control screen. The participants see the
icon to indicate that mouse operations are locked.
69
• Click the button on the projection control screen to unlock the participant's mouse operations.
The button changes to the button on the projection control screen. The participants can
operate the mouse on their devices.
Parent topic: Using Additional Functions
Controlling the Connection Bandwidth
You can reduce the size of data transferred to the projector to decrease the network load. To do this, you
can control the connection bandwidth.
1. Click on the search screen.Set options
Set options screen appears.
2. Click the tab.Adjust performance
3. Select .Projection Quality
• : Transfers projected image data with a low compression ratio to prioritize imageImage Priority
quality.
• : Compresses projected image data to increase transfer speed.Speed Priority
70
4. Select the bandwidth you want to use as the setting.Use Bandwidth
When you select a narrower bandwidth, the projected image quality may decline but the network
load is reduced.
Note: If you do not need to output audio while controlling bandwidth, make sure you clear the
Output audio from the projector Audio Outputsetting on the tab. The bandwidth used for audio
can then be used for the image transfer to improve the image quality.
Bandwidth Control Restrictions
Parent topic: Using Additional Functions
71
Bandwidth Control Restrictions
Note the following bandwidth limitations.
• When you limit the bandwidth, the image quality may decline due to the compression of the
transferred data.
• When you select 256Kbps or 512Kbps as on the tab, youUse Bandwidth Adjust Performance
cannot output audio from the projector. If you want to transfer audio, select the bandwidth to 1Mbps or
more.
• The bandwidth may momentarily exceed the value you selected because each value in the list is an
average value measured within 30 seconds.
• You can limit the bandwidth only of data you send. You cannot limit data that you receive, such as a
thumbnail.
Parent topic: Controlling the Connection Bandwidth
Related tasks
Outputting Audio from the Projector
72
Solving Problems
See the following sections to check for solutions to problems you may have using Epson iProjection.
Solving Network Connection Problems
Solving Problems During Projection
Error Messages List
Event ID List
Solving Network Connection Problems
Try these solutions depending on your network environment.
Solutions When You Cannot Connect Using Quick Connection Mode
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wireless)
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired)
Parent topic: Solving Problems
Solutions When You Cannot Connect Using Quick Connection Mode
When you cannot connect the computer and the projector using Quick Connection Mode, try the
following solutions.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the specified wireless LAN unit to the projector securely. See your projector User's Guide
for more details.
• Check for any obstacles between the computer and projector, and change their position to improve
communication. Sometimes the indoor environment prevents the projector from being found in a
search.
• Set the radio strength for the network devices to the maximum.
• Check the projector's network settings.
• Set the setting to .Connection Mode Quick
• Turn on a wireless LAN.
• When you enable the security setting, set the same passphrase to the computer and the projector.
• Close network settings on the projector, and then return to the LAN standby screen.
73
• Check the computer's network settings.
• If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your
computer.
• Enable the wireless LAN setting or AirPort on your computer.
• Check the software settings.
• Make sure you start the software in the connection mode that you set on the projector. If you cannot
select or change the connection mode, select Display Connection Mode Selection window on
startup General settings Set optionson the tab in the screen. The select connection mode
screen is displayed after restarting the software.
Parent topic: Solving Network Connection Problems
Related references
Set options - General settings
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode
(Wireless)
When you cannot connect the computer and the projector using over aAdvanced Connection Mode
wireless network, try the following solutions. If you cannot resolve the problem, contact your network
administrator.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the specified wireless LAN unit to the projector securely. See your projector User's Guide
for more details.
• Check for any obstacles between the access point and the computer or projector, and change their
position to improve communication. Sometimes, indoor environments prevent the projector from
being found in a search.
• Make sure that the access point and the computer or projector are not too far apart. Move them
closer together and try to connect again.
• Check for interference from other equipment, such as a Bluetooth device or microwave. Move the
interfering device farther away or expand your wireless bandwidth.
• Set the radio strength for the network devices to the maximum.
• Set the IP address, the subnet mask, and the gateway address for the access point correctly.
• Make sure the wireless LAN system of the access point supports the projector's wireless LAN
system.
74
• Check the projector's network settings.
• Set the setting to .Connection Mode Advanced
• Set the computer, the access point, and the projector to the same SSID.
• Set to . When is set to , it may take some time to enter LAN standby status if anDHCP Off DHCP On
available DHCP server is not found.
• Set the IP address, the subnet mask, and the gateway address for the projector correctly.
• Turn on a wireless LAN.
• Set the wireless LAN system to meet the standards supported by the access point.
• When you enable the security setting, set the same passphrase to the access point, the computer,
and the projector.
• Close network settings on the projector, and then return to the LAN standby screen.
• Check the computer's network settings.
• If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your
computer.
• Enable the wireless LAN setting or AirPort on your computer.
• Connect to the access point to which the projector is connected.
• Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the
necessary settings to open the ports. The ports used by this software are "3620", "3621", and
"3629".
• Check the access point settings.
• Set connection permission at the access point to allow projectors to connect if any functions that
block connections, such as MAC Address restrictions and port restrictions, are set to the access
point.
• Check the software settings.
• Select the network adapter you are using from on the screen. If theSwitch LAN Set options
computer has multiple LAN environments, a connection cannot be established unless the network
adapter is selected correctly.
• If you cannot find the projector you want to connect to using , selectAutomatic search Manual
search to specify the IP address.
• Make sure you start the software in the connection mode that you set on the projector. If you cannot
select or change the connection mode, select Display Connection Mode Selection window on
75
startup General settings Set optionson the tab in the screen. The select connection mode
screen is displayed after restarting the software.
• Make sure the projector supports the Epson iProjection version being used. Install Epson
iProjection from the EPSON Projector Software CD-ROM supplied with the projector (if available) or
download it from the Epson Web site.
• Install the latest version of Epson iProjection on all computers. The maximum number of computer
connections and the availability of the moderator function varies depending on the projector model,
no matter which version of Epson iProjection you are using.
• When another user is already connected, you can only connect to projectors in the same mirroring
group as that selected by the other user. Select a projector from the same mirroring group as the
user who is already connected, or select a projector that is in standby status.
Parent topic: Solving Network Connection Problems
Related references
Set options - General settings
Related tasks
Searching for Network Projectors by Specifying an IP Address or Projector Name
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode
(Wired)
When you cannot connect the computer and the projector using over aAdvanced Connection Mode
wired network, try the following solutions. If you cannot resolve the problem, contact your network
administrator.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the network cable securely.
Note:
• Use a commercially available 100BASE-TX or 10BASE-T LAN cable.
• To prevent malfunctions, use a category 5 or higher shielded LAN cable.
• Check the projector's network settings.
• Set to . When is set to , it may take some time to enter LAN standby status if anDHCP Off DHCP On
available DHCP server is not found.
• Set the IP address, the subnet mask, and the gateway address for the projector correctly.
76
• Close network settings on the projector, and then return to the LAN standby screen.
• Check the computer's network settings.
• Enable LAN settings on your computer.
Windows Vista: Check > > .Control Panel System and Maintenance Device Manager
Windows 7, Windows 8, Windows 8.1, and Windows 10: Check >Control Panel Hardware and
Sound Device Manager> .
• Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the
necessary settings to open the ports. The ports used by this software are "3620", "3621", and
"3629".
• Check the software settings.
• Select the network adapter you are using from on the screen. If theSwitch LAN Set options
computer has multiple LAN environments, a connection cannot be established unless the network
adapter is selected correctly.
• If you cannot find the projector you want to connect to using , selectAutomatic search Manual
search to specify the IP address.
• Make sure you start the software in the connection mode that you set on the projector. If you cannot
select or change the connection mode, select Display Connection Mode Selection window on
startup General settings Set optionson the tab in the screen. The select connection mode
screen is displayed after restarting the software.
• Make sure the projector supports the Epson iProjection version being used. Install Epson
iProjection from the EPSON Projector Software CD-ROM supplied with the projector (if available) or
download it from the Epson Web site.
• Install the latest version of Epson iProjection on all computers. The maximum number of computer
connections and the availability of the moderator function varies depending on the projector model,
no matter which version of Epson iProjection you are using.
• When another user is already connected, you can only connect to projectors in the same mirroring
group as that selected by the other user. Select a projector from the same mirroring group as the
user who is already connected, or select a projector that is in standby status.
Parent topic: Solving Network Connection Problems
Related references
Set options - General settings
Related tasks
Searching for Network Projectors by Specifying an IP Address or Projector Name
77
Solving Problems During Projection
Try these solutions depending on your situation.
Solutions When the Screen is Not Projected Properly
Solutions When Audio is Not Played Properly
Solutions When the Moderator Function Does Not Work
Solutions When the Projected Screen is Not Delivered
Parent topic: Solving Problems
Solutions When the Screen is Not Projected Properly
If the screen is not projected or there are problems with the project images try the following solutions.
• If you are using a Microsoft Office application, stop moving the mouse pointer. If you move the mouse
pointer continuously, the screen may not be refreshed quickly.
• If the mouse pointer flickers, try the following solutions.
• Select on the tab on theMake the movement of the mouse pointer smooth General settings
Set options screen.
• Clear on the tab on the screen.Transfer layered window Adjust performance Set options
• The Media Player movie playback screen may not be projected depending on the computer.
• The screen saver preview may not be projected properly depending on the computer.
• Reduce the number of connected devices if the connection speed declines.
• For Mac, when playing back movies, start Epson iProjection first before starting playback. If Epson
iProjection is started during movie playback and the display screen resolution and color numbers are
changed, try moving the movie playback window, minimizing it, or resizing it and so on.
• When using a computer that does not meet the software requirements, images and audio for movies
may stop.
• When another user is the moderator, you cannot control your projected display. Change the
moderator or project the screen without a moderator.
Parent topic: Solving Problems During Projection
Related references
Set options - General settings
Set options - Adjust performance
78
Related tasks
Changing the Moderator
Solutions When Audio is Not Played Properly
If there is no audio coming from the projector, try the following solutions.
• Audio can only be transferred to one projector. When multiple projectors are connected to one
computer, disconnect other projectors and try again.
• Select on the tab on the screen.Output audio from the projector Audio Output Set options
• You can only output the computer's audio from the projector when projecting one computer screen in
full screen mode.
• If the bandwidth is limited on the tab on the screen, try increasingAdjust Performance Set options
the connection bandwidth.
• If the volume for the computer is set to the minimum while the projector volume is set to the maximum,
the noise may be mixed. Turn up the computer's volume and turn down the projector's volume.
Parent topic: Solving Problems During Projection
Related references
Set options - Audio Output
Solutions When the Moderator Function Does Not Work
If the moderator function does not work properly, try the following solutions.
• Make sure you use the of the software. If you use the Participant Edition of theStandard Edition
software and need the moderator function, reinstall this software as necessary.
• Make sure your projector supports the moderator function. See the supplied with theUser's Guide
projector for more details.
• When another user is the moderator, you cannot control your projected display. Change the
moderator.
• Make sure you select when you connectConnect as a Moderator, or disable interrupt connections
a projector.
Parent topic: Solving Problems During Projection
Related tasks
Changing the Moderator
79
Solutions When the Projected Screen is Not Delivered
If the screen delivery function does not work properly, try the following solutions.
• Make sure your projector supports the screen delivery function. See the supplied withUser's Guide
the projector for more details.
• Close running projector functions.
• Make sure the image being projected is not protected by copyrights.
Parent topic: Solving Problems During Projection
Related tasks
Distributing the Projected Screen
Error Messages List
When an error occurs, an error message is displayed on your computer screen. Check for your message
and follow the instructions here to clear the error.
Error Messages When Starting up Epson iProjection
Error Messages When Using a USB Key
Error Messages When Searching for and Selecting Projectors
Error Messages When Projecting
Error Messages When Operating a Profile
Error Messages When Using the Moderator Function
Error Messages When Distributing the Projected Screen
Parent topic: Solving Problems
Error Messages When Starting up Epson iProjection
Error Messages Remedy
This application is already running. Two instances of Epson iProjection have been
started.
80
Error Messages Remedy
Cannot start this application because other
EPSON Projector software (Quick Wireless
Connection) is already running.
Close Quick Wireless Connection and then start
Epson iProjection.
To close Quick Wireless Connection, perform
Safely Remove Hardware from the icon on the
task bar to remove the Quick Wireless Connection
USB Key from the computer.
Cannot start this application because other
EPSON Projector software (USB Display) is
already running.
Close USB Display and then start Epson
iProjection.
Do one of the following to close USB Display:
• : Disconnect the USB cable from theWindows
projector.
• : Select from theMac Disconnect USB Display
icon menu on the menu bar or Dock, and then
remove the USB cable.
Cannot start this application because other
EPSON Projector software (EasyMP Network
Projection) is already running.
Close EasyMP Network Projection and then start
Epson iProjection.
Cannot start this application because other
EPSON Projector software (USB Key Setup Tool)
is already running.
Close the USB Key Setup Tool and then start
Epson iProjection.
Epson iProjection initialization failed. Restart Epson iProjection. If the message is still
displayed, uninstall and then reinstall Epson
iProjection.
Cannot open the shortcut file. The shortcut file may be corrupted. Start Epson
iProjection, and then try searching for and
connecting to the projector again.
Cannot find the projector linked to the shortcut file.
Search again.
Check the following items.
• Open a shortcut file in the connection mode for
which you created the shortcut file.
• Open a shortcut file in Advanced Connection
Mode Participant Editionif you use the of the
software.
81
Error Messages Remedy
Files are missing or invalid. Failed to start the
application. Reinstall/remove the application.
Uninstall and then reinstall Epson iProjection.
Network adapter information could not be
obtained.
Check the following items.
• A network adapter is installed on the computer.
• The driver for the network adapter being used is
installed on the computer.
• The network adapter is enabled.
After checking, restart the computer and then
restart Epson iProjection.
If you still cannot connect, check the network
settings on the computer and the network settings
on the projector.
Cannot start from the shortcut while projecting. Stop projecting and then start projection from the
shortcut. You cannot start projection from the
shortcut when you are already projecting using
Epson iProjection.
Cannot start from the shortcut while the Option
screen is displayed. Close the Option screen, and
then try opening the shortcut again.
The screen is displayed. Close theSet options
Set options screen.
The slide show will not begin until PowerPoint is
restarted.
Close PowerPoint, and then start the slide show
again.
Cannot be used with the current OS version.
Reinstall Epson iProjection.
Reinstall Epson iProjection.
Unable to start from the shortcut. A connection has
already been established with the projector.
Stop projecting and then start projection from the
shortcut. If the USB key is connected, remove the
USB key.
Parent topic: Error Messages List
Related tasks
Uninstalling Epson iProjection (Windows Vista/Windows 7/Windows 10)
Uninstalling Epson iProjection (Windows 8.x)
Uninstalling Epson iProjection (Mac)
82
Installing Epson iProjection (Windows)
Installing Epson iProjection (Mac)
Error Messages When Using a USB Key
Error Messages Remedy
Unable to find connection information. Insert the
USB key.
Insert the USB key securely into your computer.
Unable to find connection information. Insert the
USB key into the projector.
Insert the USB key securely into the projector to
update the projector network information.
Unable to find a projector that can connect with
Quick Connection Mode.
Close Epson iProjection and then insert the USB
key again.
Unable to find a projector that can connect with
Advanced Connection Mode.
Unable to use the USB key while the application is
running.
Unable to find a projector that can connect with
Participant Edition.
Make sure the projector is connected to the
network using the Advanced connection mode,
and then update the projector network information
saved on the USB key.
Files are missing or invalid. Failed to start the
application. Set up the USB key again.
Delete all files on the USB flash drive, and then
start the USB Key Setup Tool to create a USB key
again.
Unable to set up the USB key. Files are missing or
invalid. Reinstall Epson iProjection.
Unable to set up the USB key. Reinsert the USB
memory device and start USB Key Setup Tool
again.
Unable to set up the USB key. Check the amount
of free space. Necessary free space: 150 MB
Administrator authority is required to run USB Key
Setup Tool.
Run the USB Key Setup Tool as a user with
administrator authority.
Parent topic: Error Messages List
83
Related tasks
Creating a USB key on a USB Flash Drive (Windows Only)
Using a USB Key to Connect a Windows Computer
Error Messages When Searching for and Selecting Projectors
Error Messages Remedy
Cannot join. The maximum number of participants
has been exceeded.
The maximum number of devices are already
connected to the projector. Disconnect users and
projectors that are not projecting screens.
The projector keyword does not match. Please try
again.
Check the Projector Keyword displayed on the
screen, and enter the Projector Keyword.
Connection failed due to projector keyword
mismatch.
The selected projector is mirroring another
projector.
When another user is already connected, you can
only connect to the projectors in the same
mirroring group as that selected by the other user.
Select a projector from the same mirroring group,
or select a projector that is in standby status.
One or more projectors are not responding. You cannot connect to multiple projectors
simultaneously. Check the network settings on the
computer and the network settings on the
projector.
A network error occurred. Turn on your computer's wireless LAN, and then
try searching for the projector again. If you still
cannot connect to the projector, check the network
settings on the computer and the network settings
on the projector.
Connection to the projector failed. Check if the projector you want to connect to is
already connected to EasyMP Network Projection.
You cannot connect to a projector that is already
connected using EasyMP Network Projection.
Parent topic: Error Messages List
Related tasks
Uninstalling Epson iProjection (Windows Vista/Windows 7/Windows 10)
84
Uninstalling Epson iProjection (Windows 8.x)
Uninstalling Epson iProjection (Mac)
Getting the Latest Version of the Application
Installing Epson iProjection (Windows)
Installing Epson iProjection (Mac)
Related topics
Supported Resolutions and Colors
Error Messages When Projecting
Error Messages Remedy
The projector has disconnected. An error may have occurred in the projector.
Check the projector's indicator lights.
A network error occurred. Try connecting again. If you still cannot connect to
the projector, check the network settings on the
computer and the network settings on the
projector.
Parent topic: Error Messages List
Error Messages When Operating a Profile
Error Messages Remedy
Enter max. 32 characters. The entered text exceeds 32 characters. Shorten
the name to 32 characters or less.
Enter a folder name. No folder name entered. Enter a folder name.
Folders should not be created more than 6 layers
deep.
The folder structure is deeper than six folders.
Create the new folder higher up in the folder
structure.
There is already a folder named XXX in this folder. A folder with the same name already exists. Enter
another folder name.
There is already a file named XXX in this folder. A projector with the same name already exists.
Enter another projector name.
85
Error Messages Remedy
Cannot import. Format not supported by this
application.
Check the profile you want to import. You cannot
import a profile when projector information has not
been registered, or when the profile is corrupt.
Cannot import because the folder structure
exceeds six folders.
The folder structure cannot exceed six layers.
Import, move, or copy to a folder higher up in the
folder structure.
Cannot move because the folder structure
exceeds six folders.
Cannot copy because the folder structure exceeds
six folders.
Failed to open the file. The profile may be corrupted. Try importing the
profile again.
Failed to save the file. Make sure you have access rights to the folder,
and then try again.
Cannot import certain items because the
connection modes differ.
Import a profile in the connection mode in which
you created a profile.
Parent topic: Error Messages List
Related tasks
Registering a Profile
Importing a Profile
Error Messages When Using the Moderator Function
Error Messages Remedy
Cannot switch to moderator. You cannot become the moderator when another
user is the moderator. Ask the current moderator
to quit, and then try again.
Failed to switch to Moderator Mode Make sure another user is not the moderator, and
then try again.
The moderator function is not available. You have
been connected as a participant.
The projector you are connecting to does not
support the moderator function. To become the
moderator, change to a projector that supports the
moderator function.
87
Event ID Cause Remedy
0434 Network communication is unstable. Check the network communication status,
and reconnect after waiting for a while.
0481
0482
0433 Cannot play transferred images. Restart the network software.
0484 Communication was disconnected from the
computer.
04FE The network software ended unexpectedly. Check the status of network
communications. Restart the projector.
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same
SSID.
Set the computer, the access point, and the
projector to the same SSID.
0892 The WPA/WPA2 authentication type does
not match.
Check that the wireless LAN security
settings are correct.
0893 The WEP/TKIP/AES encryption type does
not match.
0894 Communication was disconnected because
the projector connected to an unauthorized
access point.
Contact your network administrator for more
information.
0898 Failed to acquire DHCP. Check the DHCP server to see if it is
operating correctly and check the LAN cable
to see if it is connected correctly. If you are
not using DHCP, set to .DHCP Off
0899 Other communication errors If restarting the projector or the network
software does not solve the problem,
contact Epson as described in your projector
User's Guide.
089A The EAP authentication type is not the
same.
Check that the wireless LAN security
settings are correct. Also, check if the
certificate is installed correctly.
089B EAP server authentication failed.
089C EAP client authentication failed.
089D Key exchange failed.
88
Event ID Cause Remedy
0B01 The built-in storage could not be detected
correctly.
Perform . When theDelete All Internal Data
internal storage is deleted correctly, plugin
the power cord for the projector and turn it
on. If it is not deleted correctly, contact
Epson as described in your projector User's
Guide.
Go to > >Extended Whiteboard Settings
Internal Storage.
0BFF An error has occurred in the Whiteboard
function.
Restart the projector.
Parent topic: Solving Problems
89
Screen Summary
See these sections for more information about the Epson iProjection screens.
Select Connection Mode Screen
Search Screen
Save Screen
Set options
Toolbar
Projection Control Screen
Thumbnail Screen
Viewer Screen
90
Select Connection Mode Screen
When you start Epson iProjection, the select connection mode screen is displayed.
1 Select the connection mode.
2 Select to always connect using the selected connection mode.
Parent topic: Screen Summary
Related concepts
Connection Methods for Various Network Environments
91
Search Screen
When you start Epson iProjection, the search screen is displayed.
1 Displays the user name displayed in the user list on the projectionUser name
control screen. You can edit the user name on the tabUser Settings
on the screen.Set options
2 Searches for projectors on the network to which the computer isAutomatic search
connected.
3Manual search
(Advanced Connection
Mode only)
Searches for projectors on the network by specifying the projector's
IP address or projector name.
4 Searches for projectors on the network by using the projectorProfile
information saved previously.
5 list Displays the registered profiles (projector information). When youProfile
double-click the profile, the projectors registered in the profile are
searched for on the network.
6 Displays the screen.Set options Set options
7 Connects to the selected projectors.Join
92
8List of Connected
Projectors Advanced(
Connection Mode only)
Displays information on the projectors selected from the Projector
List List of. Even if the search method is changed, the content of the
Connected Projectors remains the same.
9 (Register Advanced
Connection Mode only)
Registers the projectors from the to aList of Connected Projectors
profile.
10 Connect as a
Moderator, or disable
interrupt connections.
Connects to the selected projectors as the moderator and you can
prevent any other users from interrupting your connection (supported
models only).
The moderator function is available only on the ofStandard Edition
the software.
11 Clears information displayed in the and theClear list Projector List List of
Connected Projectors.
12 Displays a list of the projectors found on the network. You can thenProjector List
select projectors to connect to. The search results for each search
method ( , , and ) areAutomatic search Manual search Profile
displayed in separate lists.
• : See the description of projector status icons in the nextStatus
table.
• : Displays the projector's name.Projector name
• ( only): Displays the projector'sSSID Quick Connection Mode
SSID.
• ( only): Displays theSignal Intensity Quick Connection Mode
signal intensity when a connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
• ( only): Displays theIP address Advanced Connection Mode
projector's IP address.
• : Displays comments for the projector. You can edit theComments
comment by right-clicking the profile, and then clicking .Property
You can enter up to 32 characters.
13 Updates information in the .Refresh Projector List
14 Manual search box
(Advanced Connection
Mode only)
When using , enter the projector's IP address or theManual search
projector name. Click the button to search for the specifiedSearch
projector.
A
C
D
B
94
Related tasks
Searching for Network Projectors Automatically
Searching for Network Projectors by Specifying an IP Address or Projector Name
Related topics
Searching for Network Projectors Using a Profile
Searching for Network Projectors Using a Shortcut
Set options
Save Screen
When you search for projectors and save information as a profile on the search screen, the screenSave
is displayed.
1 Enter the projector file name.Projector file name
95
2 Select the folder where you want to save the profile.Save in
3 Creates a new folder.Create New folder
4 Registers the projector information in the profile.OK
Parent topic: Screen Summary
Related tasks
Registering a Profile
Set options
When you click on the Epson iProjection search screen, the screen isSet options Set options
displayed.
Note:
• You can also access from the menu on the projection control screen. When youSet options Tool
access from the projection control screen, the tab is not displayed.Set options User Settings
• The available settings vary depending on the edition of the software.
Set options - User Settings
Set options - General settings
Set options - Adjust performance
Set options - Audio Output
Set options - Deliver
Parent topic: Screen Summary
Related references
Search Screen
Toolbar
96
Set options - User Settings
When you click the tab on the screen, the following screen is displayed.User Settings Set options
User name Enter the user name displayed in the user list on the projection
control screen. You can enter up to 32 characters. This setting is
synchronized with the setting on the search screen.
Shared Profile Name
(Advanced Connection Mode
only)
Enter the network location or URL of the shared profile (including the
name of the profile) as shown below.
• For a file server (Windows only): \\xxxxx\xxxxx.mplist
• For a web server: http://xxxxx/xxxxx.mplist
Delete Advanced Connection(
Mode only)
Deletes the input history for .Manual search
97
Restore Defaults Set optionsResets all adjustment values for to their default
settings, except for on the tab.Switch LAN General settings
Parent topic: Set options
Related references
Search Screen
Projection Control Screen
Related tasks
Searching for Network Projectors Automatically
Sharing a Profile over a Network
Set options - General settings
When you click the tab on the screen, the following screen is displayed.General settings Set options
99
Switch LAN Windows only
Use this setting if you need to switch the network adapter used to
perform a search when a computer has multiple adapters.
By default, all of the network adapters are used to perform a search.
Wireless LAN passphrase
setting files Quick(
Connection Mode only)
In , SSIDs and passphrases are stored onQuick Connection Mode
the computer when connecting to a projector with security settings
enabled. You can edit and delete the stored information.
Edit: Displays the wireless network management screen for the
computer.
Delete all: Deletes all the SSIDs and passphrases stored on the
computer.
Restore Defaults Set optionsResets all adjustment values for to their default
settings, except for on the tab.Switch LAN General settings
Parent topic: Set options
Related tasks
Changing the Number of Projected Panels
Hiding the Projection Control Screen
100
Set options - Adjust performance
When you click the tab on the screen, the following screen isAdjust performance Set options
displayed.
Projection Quality Sets the priority for projected image quality and transfer speed.
• : Transfers projected image data with a lowImage Priority
compression ratio to prioritize image quality.
• : Compresses projected image data to increaseSpeed Priority
transfer speed.
Use Bandwidth Controls the bandwidth for the data transfer. When you select a
narrower bandwidth, the projected image quality may decline but the
network load is reduced.
101
Lower the resolution and
transfer
Available only when the is set to 1Mbps or moreUse Bandwidth
and when you connect to the projector with a resolution of WUXGA
(1920 × 1200).
Select to reduce the size of the data to be transferred to the projector
by lowering the resolution. Use this option on a slow network or if it
takes too long to display the image or projection is interrupted.
Transfer layered window Windows 7 BasicWindows 7 (when is selected as the theme) only
When using a layered window, contents such as messages
displayed on the computer are not projected by the projector. Select
this to project contents from a different layered window.
If the mouse pointer flickers on the screen, select Make the
movement of the mouse pointer smooth General settingson the
tab.
Version Displays Epson iProjection version information.
Restore Defaults Set optionsResets all adjustment values for to their default
settings, except for on the tab.Switch LAN General settings
Parent topic: Set options
Related tasks
Changing the Number of Projected Panels
Projecting Your Screen
Controlling the Connection Bandwidth
102
Set options - Audio Output
When you click the tab on the screen, the following screen is displayed.Audio Output Set options
Output audio from the
projector
Select to output the computer's audio from the projector. Clear to
output audio from the computer.
Note:
• You can only output the computer's audio from the projector when
projecting one computer screen in full screen mode.
• When you select or as on the256Kbps 512Kbps Use Bandwidth
Adjust Performance tab, you cannot output audio from the
projector and cannot select this setting.
Restore Defaults Set optionsResets all adjustment values for to their default
settings, except for on the tab.Switch LAN General settings
103
Parent topic: Set options
Related tasks
Outputting Audio from the Projector
Controlling the Connection Bandwidth
Set options - Deliver
When you click the tab on the screen, the following screen is displayed.Deliver Set options
Display received images in the
Viewer
Select to open the received image in the Viewer bundled with Epson
iProjection.
104
Save Location Folder Displays the folder where the received image file is saved.
Saved images are stored in the following folders.
•Windows
<startup_drive>:\users\<user_name>\Documents\Epson
iProjection
•Mac
<startup_drive>:\Users\<user_name>\Pictures\Epson iProjection
Open Save Location Folder Opens the folder where the received image file is saved.
Allow Moderator Monitoring Select to allow the moderator to view the computer screen as a
thumbnail.
Restore Defaults Set optionsResets all adjustment values for to their default
settings, except for on the tab.Switch LAN General settings
Parent topic: Set options
Related tasks
Distributing the Projected Screen
Toolbar
After Epson iProjection starts and a connection is made with the projector, the toolbar is displayed on the
computer screen. You can use this toolbar to control the projected image and to disconnect the network
connection.
Note: The items displayed on the toolbar vary depending on the connection method and the edition or
your role of the software.
105
Show
Releases or and projects the computer screen as it is.Stop Pause
Stop
Stops projection while connected to the projector. A black screen is
projected while stopped.
Pause
Pauses the computer screen currently displayed. The projected
display does not change, even if you make changes on the computer
screen.
Deliver Projected Screen
Distributes the currently projected screen images to the participant's
devices.
Display Thumbnails
Displays thumbnails of the participant's device screens for the
moderator to check.
Display Received Image
Displays received images in the Viewer.
Project My Screen
Projects your computer screen in full screen mode.
Leave Disconnects the connection between your computer and the
projectors.
Disconnect All Disconnects the connection between all devices and projectors
participating in the meeting.
106
Switch to Projection control
screen
Switches to the projection control screen.
Projector Information
Displays projector network information. The isProjector Keyword
the keyword you entered when you connected to the projector.
----: The projector keyword is not set.
Unknown: The projector keyword is not acquired because the
connection is established without entering the projector keyword
such as reading QR code and inserting the USB key.
Parent topic: Screen Summary
Related references
Projection Control Screen
Related tasks
Operating the Projected Display Status
Projecting Your Screen
Disconnecting
108
1 menu Click to select to close the software.File Exit
Tool menu Click to select the following items.
• : Locks the participant's mouse operations.Deny User Operations
• : Unlocks the participant's mouseAllow User Operations
operations.
• : Distributes a blank screen to theDeliver Blank Screen
participant's devices so that participants can draw freely.
• : Displays received images in the Viewer.Display Received Image
• : Displays the screen.Set options Set options
Disconnect Leave Disconnect Allmenu Click to select or .
Help Version informationmenu Click to select .
2 Displays the number of users connected to the projector.Number of connections
3 User information Displays your name and status. Displayed in blue when your
computer screen is being projected. Displayed in gray when you are
in the projection area but not projecting.
4 User search box Enter the user name you want to search for, and then click the
button. The search results are displayed in the user list.
Click the button to return to the original user list.
5 User list Displays the user names for the computers connected to the
projectors. You can connect up to 50 devices to a projector
simultaneously, such as computers, smartphones and tablets using
Epson iProjection.
When you drag and drop a user name to a white panel in the
projection area, the computer screen is projected. The background for
users that are currently being projected is blue and users that are in
the projection area but not currently projecting is gray. Even if a user
left the session, their name remains in the user list and their text color
is gray.
The default setting for the user name is the log in user name. You can
change the user name on the tab on theUser Settings Set option
screen, or the search screen.
110
14 Screen control buttons Indicates the following status of the projector.
• : Releases or and projects the computerShow Stop Pause
screen as it is.
• : Stops projection while connected to the projector. A blackStop
screen is projected while stopped.
• : Pauses the computer screen currently displayed. ThePause
projected display does not change, even if you make changes on
the computer screen.
15
Deny/Allow User
Operations
Locks or unlocks the participant's mouse operations.
16
Switch to Toolbar
Switches to the toolbar.
17 Change projection
buttons
Changes the number of panels available for projecting computer
screens.
• : Projects the screen from one device in fullOne Screen
screen mode without dividing the projected display.
• : Projects the screens from up to two devices atTwo Screens
the same time by dividing the projected display in two.
• : Projects the screens from up to four devices atFour Screens
the same time by dividing the projected display in four.
18
Project My Screen
Projects your computer screen in full screen mode.
Parent topic: Screen Summary
112
1 Thumbnail Displays a participant's device screen. The thumbnail being
projected is surrounded by a blue frame.
2 Thumbnail check box Select the thumbnail that you want to project. You can select up to
12 thumbnails.
3 Displays the user name of each thumbnail. You can display up to 32User name
characters.
4
Close
Closes the thumbnail screen.
5
Project
Projects the thumbnail you selected. When you select more than 5
thumbnails, the thumbnail selection screen appears. After selecting
up to 4 thumbnails, you must click the button again.
6
Project My Screen
Projects the screen from your computer in full screen mode without
projecting any other users' screens.
7
Next
Displays next page.
8 Page list Switches to the page you want to view.
9
Previous
Displays previous page.
10
Display Small
Thumbnails
Reduces the size of each thumbnail so you can view more
thumbnails on the screen.
113
11
Display Large
Thumbnails
Increases the size of each thumbnail so you can view more details
on each one.
12 Displays the number of selected thumbnails. Deselect the check boxClear All
to clear all the selections. If you select the check box again, the
previously selected thumbnails are selected again.
13
Refresh
Refreshes the thumbnails.
Parent topic: Screen Summary
Viewer Screen
The viewer screen appears when you perform one of the following operations.
• When you receive the distributed image data.
• When you select from the menu on the projection control screen.Display Received Image Tool
114
• When you click the button on the toolbar.
1 Next data Displays next data.
2 Previous data Displays previous data.
Parent topic: Screen Summary
116
4. Click from the category.Uninstall a program Programs
5. Select , and then click .Epson iProjection Uninstall/Change
6. Follow the on-screen instructions.
Parent topic: Updating and Uninstalling the Software
Uninstalling Epson iProjection (Windows 8.x)
Follow the instructions below to uninstall the Epson iProjection.
Note: You need administrator authority to uninstall the software.
1. Turn on your computer.
2. Make sure all running applications are closed.
3. Press the key on the keyboard to display all apps.
4. Right-click (press and hold) , and then select .Epson iProjection Ver.X.XX Uninstall
5. Follow the on-screen instructions.
Parent topic: Updating and Uninstalling the Software
Uninstalling Epson iProjection (Mac)
For Mac, follow the instructions below to uninstall Epson iProjection.
1. Turn on your computer.
2. Make sure all running applications are closed.
3. Open the folder.Applications
4. Open the - folder, and then double-clickEpson iProjection Tools Epson iProjection
Uninstaller.app.
5. Follow the on-screen instructions.
Parent topic: Updating and Uninstalling the Software
Supported Resolutions and Colors
Check these sections for the computer screen resolutions and the number of colors that Epson
iProjection can project.
Supported Resolutions
117
Display Color
Parent topic: Appendix
Supported Resolutions
The following computer screen resolutions can be projected. You cannot connect to a computer with a
resolution greater than WUXGA.
• SVGA (800 × 600)
• XGA (1024 × 768)
• SXGA (1280 × 960)
• SXGA (1280 × 1024)
• SXGA+ (1400 × 1050)
• WXGA (1280 × 768)
• WXGA (1280 × 800)
• WXGA+ (1440 × 900)
• UXGA (1600 × 1200)
• WUXGA (1920 × 1200)
When using a computer screen with a unique aspect ratio, the resolution is increased or decreased
depending on the resolution of the computer and the projector to avoid impairing image quality.
Depending on the resolution, the vertical or horizontal margins may be projected in black.
Parent topic: Supported Resolutions and Colors
Display Color
The following number of computer screen colors can be projected.
Windows Mac
16-bit color Approx. 32,000 colors (16-bit)
32-bit color Approx. 16.7 million colors (32-bit)
Parent topic: Supported Resolutions and Colors
118
Limitations
Check these sections for restrictions applied when projecting computer images while using Epson
iProjection.
Connection Limitations
Limitations when Projecting from Windows Photo Gallery or Windows Live Photo Gallery
Limitations in Windows Aero
Limitations when Projecting from Windows Media Center
Parent topic: Appendix
Connection Limitations
Note the following limitations when using Epson iProjection.
• You can connect up to four projectors to one computer and project simultaneously. (Multi-screen is not
supported.)
• You can connect up to 50 devices to a projector simultaneously, such as computers, smartphones and
tablets using Epson iProjection.
• Audio can only be transferred when connected to one projector and projecting one computer screen in
full screen mode. If multiple projectors are connected or if the projected display is divided, audio
cannot be transferred during projection.
• If the transmission speed of the wireless LAN is low, the network may disconnect unexpectedly.
• Applications that use part of DirectX functions may not be displayed correctly (Windows only).
• You cannot project full-screen MS-DOS prompts (Windows only).
• There are times when the image on the computer screen and the image projected by the projector
may not match exactly.
• Movies are not played as smoothly as they are on a computer.
• When you enable the setting on the tab on theUse Interactive Pen General settings Set options
and see black bands on the computer screen, the position of the interactive pen may be misaligned.
Parent topic: Limitations
121
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Parent topic: Notices
About Notations
• Microsoft®Windows Vista®operating system
• Microsoft®Windows®7 operating system
• Microsoft®Windows®8 operating system
• Microsoft®Windows®8.1 operating system
• Microsoft®Windows®10 operating system
In this guide, the operating systems above are referred to as "Windows Vista", "Windows 7", "Windows
8", "Windows 8.1", and "Windows 10". Furthermore, the collective term Windows may be used to refer to
Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, and multiple versions of Windows
may be referred to as, for example, Windows Vista/7, with the Windows notation omitted.
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
• OS X 10.11.x
• macOS 10.12.x
In this guide, the operating systems above are referred to as "OS X 10.7.x", "OS X 10.8.x", "OS X
10.9.x", "OS X 10.10.x", "OS X 10.11.x", and "macOS 10.12.x". Furthermore, the collective term "Mac" is
used to refer to them all.
Parent topic: Notices
General Notice
EPSON and EasyMP are registered trademarks, and EXCEED YOUR VISION and its logo is registered
trademark or trademark of Seiko Epson Corporation.
XGA is a trademark or registered trademark of International Business Machines Corporation.
Mac, Mac OS, OS X and macOS are registered trademarks of Apple Inc.
122
Microsoft, Windows, Windows Vista, and Windows logo are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Other product names used herein are also for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
Software Copyright: This product uses free software as well as software to which this company holds the
rights.
© 2016 Epson America, Inc.
Parent topic: Notices
Copyright Attribution
7/17
CPD-53792
Parent topic: Notices

Produkt Specifikationer

Mærke: Epson
Kategori: videoprojektorer
Model: PowerLite Pro Cinema 7100

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson PowerLite Pro Cinema 7100 stil et spørgsmål nedenfor, og andre brugere vil svare dig


videoprojektorer Epson Manualer

Epson

Epson ELPCB03N Manual

13 Marts 2025
Epson

Epson Home Cinema 8100 Manual

17 Februar 2025
Epson

Epson Pro Cinema EH-QB1000W Manual

26 September 2024
Epson

Epson ELPMB71 Manual

29 Juli 2024
Epson

Epson ELP-3500 Manual

24 Maj 2024
Epson

Epson EB-982W Manual

22 Maj 2024
Epson

Epson MG-850HD Manual

16 Maj 2024
Epson

Epson V11H336120 data projector Manual

8 Maj 2024
Epson

Epson EB-1960 Manual

8 Maj 2024
Epson

Epson EB-735F Manual

7 Maj 2024

videoprojektorer Manualer

Nyeste videoprojektorer Manualer

Irradio

Irradio VDP-IR250HD Manual

16 Juni 2025
Krüger&Matz

Krüger&Matz V-LED50 Manual

9 Juni 2025
Overmax

Overmax Multipic Veer Manual

8 Juni 2025
Sony

Sony VPL-VW80 Manual

6 Juni 2025
Sony

Sony VPL-CS20 Manual

6 Juni 2025
Sony

Sony VPL-EX281 Manual

3 Juni 2025
Sony

Sony VPL-DW125 Manual

2 Juni 2025
Samsung

Samsung A600B Manual

2 Juni 2025
Sony

Sony VPL-CX21 Manual

1 Juni 2025
XGIMI

XGIMI Halo+ 2.0 Manual

1 Juni 2025