Equip Cat.6 Keystone Jack unshielded LSA+ Manual

Equip Kabler til computere og periferiudstyr Cat.6 Keystone Jack unshielded LSA+

Læs gratis den danske manual til Equip Cat.6 Keystone Jack unshielded LSA+ (1 sider) i kategorien Kabler til computere og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Equip Cat.6 Keystone Jack unshielded LSA+, eller vil du spørge andre brugere om produktet?

Side 1/1
2. Follow the color-coding to position T568A or T568B wiring.
T568A T568B
Pin 1 Pin 1White/Green White/Orange
Pin 2 Pin 2Green Orange
Pin 3 Pin 3White/Orange White/Green
Pin 4 Pin 4Blue Blue
Pin 5 Pin 5White/Blue White/Blue
Pin 6 Pin 6Orange Green
Pin 7 Pin 7White/Brown White/Brown
Pin 8 Pin 8Brown Brown
Cap
Cable tie
www.equip-info.net
1. Strip approximately 40mm of the cable jacket.
3. Follow the wiring sticker to place the wires into IDC slot.
Make sure to keep the pairs twisted as long as possible.
4. Punch the wires with a 110 or Krone impact tool and cut
off the surplus wires.
Unshielded Type:
5. Snap in the IDC cap to fix the wires, and finish the installation.
Shielded Type:
5. Tie up the cable by cable tie, and finish the installation.
40mm
Cat.6 Keystone Jack LSA+


Produkt Specifikationer

Mærke: Equip
Kategori: Kabler til computere og periferiudstyr
Model: Cat.6 Keystone Jack unshielded LSA+

Har du brug for hjælp?

Hvis du har brug for hjælp til Equip Cat.6 Keystone Jack unshielded LSA+ stil et spørgsmål nedenfor, og andre brugere vil svare dig