Equip Pocket KVM Switches PS/2 Manual

Equip Andet computertilbehør Pocket KVM Switches PS/2

Læs gratis den danske manual til Equip Pocket KVM Switches PS/2 (8 sider) i kategorien Andet computertilbehør. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Equip Pocket KVM Switches PS/2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Table of Content

■ Introduction

Overview……………...…………………………….1

Features………………….………………………….2

■ Installations

Console Connection……………….………………...3

Computers Connection……………….……….…….5

Initial Power-up……………….………………..…….7

■ Operations

Front Panel operation… ………...……………..….8

Hot-key commands…...…………...……………..….8

■ Appendices

Specifications………………..……………………11

■ Troubleshooting…………………...…………12

Please read this manual thoroughly

and follow the Installation procedures to

prevent any damage to the KVM Switch

SW0206C, SW0207A, SW0407C, SW0408A

or any connecting device.

This device is tested and complies with Part 15 of

FCC/class B, CE and VCCI rules.

- 1 -

----------------- Introduction

Overview

The KVM Switch SW0206C, SW0207A, SW0407C and

SW0408A are computer switches that allow access to

two or four IBM compatible computers from one PS/2

keyboard, mouse and monitor. Switching between

computers is as easy as pressing the push button or

entering hot-key commands from your keyboard. There

is no interface card and software to install and the switch

is independent of the computer operating system.

Ready to run right out of the box, this kit comes with

everything you need - a switch and complete cable sets,

just hook them up and go. By allowing one console to

manage all your computers, the SW0206C, SW0207A,

SW0407C and SW0408A eliminate the expense for extra

consoles, the spaces for extra peripherals and the time

hopping around for accessing different computers.

SW0207A allows one microphone and speaker to be

shared by two computers and SW0408A allows four.

- 2 -

Features

nUnique loose-free cables included preventing

keyboard or mouse connector from getting loose.

nSupports PS/2 keyboard and mouse.

nKeyboard and mouse emulation for error-free PC boot

up.

nKeyboard and mouse are hot pluggable at any time

without turning either the switch or PCs off.

nSpace-saving design - all cables are connected to the

rear.

nAuto scan automatically selects computers

sequentially.

nSupports M/S IntelliMouse (Pro), Explorer, Optical.

nHot-key and push button allow easy computer

access.

nKeyboard states automatically saved and restored

when switching computers.

nOperating system and software independent,

transparent to all applications.

nHigh VGA resolution 1920x1440.

nDDC2B compatible.

nPower-free operation - the switch draws power from

the attached PCs.

nSW0207A and SW0408A support microphone and

speaker switching.

- 3 -

-----------------Installation

Console Connection

Turn your computers off. Connect a PS/2 keyboard to

the mini-DIN-6 port marked with a keyboard and a PS/2

mouse to the mini-DIN-6 port marked with a mouse.

Then connect your VGA monitor cable directly to the

HD-DB-15 port as shown in figure 1 for 2-port KVM

Switch SW0206C.

Figure 1:KVM Switch SW0206C Console Connection

Produkt Specifikationer

Mærke:	Equip
Kategori:	Andet computertilbehør
Model:	Pocket KVM Switches PS/2
Produktfarve:	Sølv
Forbindelsesteknologi:	Ledningsført
Antal kontrollerede computere:	2
Tastatur porttype:	PS/2
Mus porttype:	PS/2
Video porttype:	VGA