Escort Solo S4 Manual

Escort Detektor Solo S4

Læs gratis den danske manual til Escort Solo S4 (2 sider) i kategorien Detektor. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Escort Solo S4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RADAR

•

LASER

•

SAFETY

•

DETECTO

Cordless Long Range

Radar Laser Detector

Cordless Convenience

Long Range Radar/Laser Detection

OLED Display

OLED

Long Range Protection + Cordless Convenience

Registration

for our product warranty and qualify for

special oers at EscortRadar.com

SOLO S4 Info & Accessories

800.433.3487

EscortRadar.com

ESCORT Inc.

5440 West Chester Road

West Chester OH 45069

Sales/Service 800.433.3487

www.EscortRadar.com

SmartShield®, AutoSensitivity™, MuteDisplay™, and

ExpertMeter™ are trademarks of ESCORT Inc. SWS is a

trademark of SWS, L.C.

Features, specications and prices subject to change

without notice.

Designed in the USA by Escort, Inc., manufactured in the

Philippines.

FCC NOTE: Modications not expressly approved by the

manufacturer could void the user’s FCC granted

authority to operate the equipment.

FCC ID: QKLS4

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this

device must accept any interference received including

interference that may cause undesired operation.

6 8

Settings & Preferences

Press the RVW button to go Press the CHG button to change

from one category to the next your setting within a category

Pilot Light Pilot HWY * Full word: Highway or Auto or City

(Options using Pilot H Letter: H or A or C

12-volt SmartCord) Pilot H.> Letter, with scanning dot

Pilot + Symbol: + or

•

or –

Pilot +.> Symbol, with scanning dot

Pilot +> Scanning symbol

Auto Power aPwr Motn * Uses motion to turn SOLO S4 o

aPwr Time Uses time to turn SOLO S4 o

aPwr Off Turn SOLO S4 on and o manually

Power-On Sequence

PwrOn STD * Standard power-on sequence

PwrOn FST Fast power-on sequence

Signal Strength Meter

Meter STD * Standard signal strength meter

Meter EXP Expert Meter

AutoMute

aMute ON * AutoMute on

aMute OFF AutoMute o

AudioTones

Tone STD * Standard tones

Tone LOUD Loud tones

City Mode Sensitivity

City STD * Standard City mode sensitivity

City LoX Low X-band sensitivity in City Mode

City NoX No X-band sensitivity in City Mode

Brightness

Brt AUTO * Brightness is controlled automatically

Brt MIN Minimum brightness when turned on

Brt MED Medium brightness when turned on

Brt MAX Maximum brightness when turned on

Brt DARK Full Dark Mode when turned on

Bands

Bands DFT * Def ault bands selected

Bands MOD One or more bands are disabled

Turn bands “ON” or “OFF” by

pressing the Mute button

X ON or OFF * X-band detection on

K ON or OFF * K-band detection on

Ka ON or OFF * Ka-band detection on

LSR ON or OFF * Laser detection on

SWS ON or OFF * SWS detection o

VG2 ON or OFF * VG2 detection o

EZ-Programming

How to use EZ-Programming

1 To enter Program Mode, press and hold

both PGM buttons for 2 seconds. The unit

will beep twice, and will display the word

Program.

2 Then press either RVW button to review

the current settings. You can either tap the

button to change from item to item, or press

and hold the button to scroll through the

items.

3 Press the CHG button to change any

setting. You can either tap the button to

change from setting to setting, or hold the

button to scroll through all the options.

4 To leave the Program Mode, simply wait 8

seconds without pressing any button. The

unit will display Complete, beep 4 times,

and return to normal operation.

To quickly reset SOLO S4 to the factory

program settings, press and hold the Mute

and SEN buttons while turning SOLO S4 on.

Example of EZ-Programming

Here is how you would turn SOLO S4’s

AutoMute feature o.

1 Enter the Program Mode by holding one

of the VOL buttons and SEN button down

for 2 seconds. SOLO S4 will beep twice and

display Program.

2 Then hold the RVW button down. SOLO S4

will scroll through the categories, starting

with Pilot options, Auto-Power, Power-On

sequence, Signal Strength Meter, AutoMute,

Tones, City sensitivity, Brightness, and Bands.

3 Release the RVW button when SOLO S4

shows the AutoMute item. Since the

factory setting is for AutoMute to be on,

SOLO S4 will display aMuteON. (If you

accidentally go to the next category, press

the opposite “VOL” button to go back.)

4 Press the CHG button to change from

aMuteON to aMuteOFF.

5 To complete the Programming, simply

wait 8 seconds without pressing any

button. SOLO S4 will display Complete,

beep 4 times, and return to normal

operation.

*Default Setting

Open ➜

Notes for Settings & Preferences

For descriptions and details of features and

functions visit EscortRadar.com to view and

download the complete SOLO S4 Owner’s

Manual.

Restoring the Factory Default Settings:

To reset SOLO S4 to its original factory

settings, press and hold the Mute and M

(Mode) buttons while turning SOLO S4 on.

SOLO S4’s display will provide a Reset

message, accompanied by an audible alert,

acknowledging the reset.

Service Procedure

If your SOLO S4 ever needs service, call us at

1-800-543-1608. We may be able to solve

your problem over the phone. If the problem

requires that you send your SOLO S4 to the

factory for repair, we will provide you with a

Service Order Number, which must be

included on the outside of your shipping box.

Enclose the following information with your

SOLO S4 and power cord:

• Your Service Order Number

• Your name and return address

• Your daytime telephone number

• A description of the problem you

are experiencing

Quick Reference

Congratulations

The SOLO S4 introduces a new level of

revolutionary cordless performance

and innovative features:

• Long-range cordless

performance for both

radar and laser

• AutoPower feature maximizes

battery life

• Brilliant high-resolution OLED

display

• Advanced EZ-Programming lets you

customize up to 9 features

• Exclusive AutoSensitivity mode

virtually eliminates false alarms, plus

Highway and City settings

• ExpertMeter tracks and displays up to

8 radar signals simultaneously

• Detects and displays up to 64 Safety

Warning System messages

Continued ➜

SOLO S4 Features

Your new

SOLO S4 is

the most advanced cordless radar, laser and

safety detector available.

The SOLO S4 includes full X, K, SuperWide Ka,

and Safety Warning System radar capability,

front and rear laser detection, digital signal

processing (DSP) for superior range and

reduced false alarms, our patented Mute and

AutoMute, audible and visual band alerts,

and all the performance you’d expect from

ESCORT.

Go to EscortRadar.com/manuals for full

featured owner’s manual.

Please drive safely.

Windshield Mount

SOLO S4’s EasyMount windshield bracket is

designed for unobtrusive and hassle-free

mounting.

SOLO S4 Mounting Location

WARNING: ESCORT cannot anticipate the

many ways SOLO S4 can be mounted. It is

important that you mount SOLO S4 where it

will not impair your view nor present a

hazard in case of an accident.

For optimum detection performance, we

recommend the following:

•

Using the supplied Windshield Mount, stick

the suction cups to the windshield, and

mount your SOLO S4 level and high enough

on your front windshield to provide a clear

view of the road ahead.

•

Mount SOLO S4 away from windshield

wipers, other solid objects, and heavily

tinted areas that might obstruct the radar

antenna or laser lens.

3 4 5

Radar Antenna and Laser Lens

The rear panel of your SOLO S4 should have a

clear view of the road ahead. For best

performance, do not mount SOLO S4

directly behind windshield wipers

or tinted areas.

Graphic OLED Display

During an alert, the display will turn on and

indicate radar band, and a precise bar-graph

of signal strength. Programming options and

SWS messages are also displayed.

NOTE: When using SOLO S4 in battery mode,

the display will turn o automatically until a

signal is detected, or you enter program mode.

This maximizes battery life. When using the

optional 12-volt SmartCord, the display will

remain on and provide several pilot options for

power-on indication.

12-volt Power Jack

For 12-volt operation, plug the optional

SmartCord into this connector.

Mute / Battery Status Button

Briey press this button (located on top) to

silence the audio for a specic alert.

Ear Phone Jack

A standard 1/8 inch (or 3.5 mm) earphone

jack is located on the right front side of the

SOLO S4.

SEN Button

Switches sensitivity between Highway,

AutoSensitivity, and City settings. In general,

we recommend the AutoSensitivity mode.

Volume Control

Press the up or down button to adjust the

volume.

EZ-Programming

SOLO S4 is ready to go, just plug it in and

turn it on. If you prefer, you can also easily

customize up to 9 features for your specic

driving preferences.

AutoMute

SOLO S4’s patented AutoMute automatically

reduces the volume level of the audio alert

after a brief period.

If you prefer, you can turn AutoMute o.

EasyMount Slot

Insert SOLO S4’s adjustable Windshield

mount into this slot.

EasyRelease Button

Press the release button, and slide the

Windshield mount into one of its four locking

positions.

Rear Laser Port

Receives laser signals from behind the vehicle.

Power-On Indication

Three LED's (green, yellow, red) mounted

between the PWR button and the display,

indicate power (blinking in battery mode,

solid when optional 12-volt power cord is

used). These also indicate the sensitivity

mode that the unit is in,( "H" for highway, "A"

for AutoSensitivity, and "C" for city).

PWR

Press the PWR button to turn SOLO S4 on.

Press and hold the PWR button to turn SOLO

S4 o.

AutoPwr Feature

The SOLO S4 will automatically shut o

once the vehicle has

stopped moving for

approximately

25 minutes.

Controls & Features Installation

1 Depress the adjustment button on the top

of SOLO S4 (above the word “RELEASE”) and

slide the EasyMount bracket into the slot

until mount is locked into the position which

best ts the angle of your windshield (there

are four settings available). For extremely

horizontal or extremely sloped windshields,

the EasyMount bracket can be bent.

To ensure that the suction cups adhere to the

windshield rmly, be sure to keep both your

windshield and the suction cups clean.

2 To adjust SOLO S4 on your windshield, use

the EasyMount adjustment button located

on the top of the SOLO S4, and slide SOLO S4

forward or backward to obtain a level

horizontal position.

When installed and adjusted properly, the

back top edge of the SOLO S4 should rest

solidly against your windshield.

User’s Tip: You can leave the EasyMount

bracket in place on your windshield, and

easily remove SOLO S4 by pressing the

adjustment button and sliding SOLO S4 o

the mount. Again, be sure to position the

bracket where it won't present a hazard in

the event of an accident. Additional mounts

are available at EscortRadar.com.

Battery Installation

Remove the battery door, located on the

bottom of the detector, and install (2) AA

batteries (supplied). Be sure to note the

correct polarity for each battery

(See legends inside battery compartment).

Optional 12-volt SmartCord

To power SOLO S4 using 12-volts, simply

remove the power connector plug, and

insert the small end of the optional

SmartCord, (telephone-type connector) into

the modular jack on SOLO S4’s right side.

Plug the lighter plug adapter into your

vehicle’s lighter socket or accessory socket.

The SmartCord allows you to operate the

SOLO S4 on 12 volts DC negative ground only.

The lighter plug is a standard size and will

work in most vehicles. Of course,

your lighter socket must be clean

and properly connected for proper

operation.

NOTE: Depending on your vehicle the power

socket may either be continuously on, or it may

be switched on and off with your ignition switch.

Produkt Specifikationer

Mærke:	Escort
Kategori:	Detektor
Model:	Solo S4

Har du brug for hjælp?

Hvis du har brug for hjælp til Escort Solo S4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Detektor Escort Manualer

Escort Redline Ci 360c Manual

6 Juli 2025

Escort MAX 4 Manual

5 September 2024

Escort X80 Manual

19 August 2024

Escort Solo S4 Manual

16 August 2024

Escort MAX 360c Manual

14 August 2024

Escort MAX 360c MKII Manual

13 August 2024

Escort MAXcam 360c Manual

13 August 2024

Escort Passport 9500ix Manual

13 August 2024

Escort Solo S2 Manual

11 August 2024

Escort RedLine EX Manual

10 August 2024

Detektor Manualer

Nyeste Detektor Manualer

Gossen Metrawatt METRAFUSE FD PRO Manual

26 September 2025

Gigahertz Solutions MK20 Manual

20 September 2025

Gigahertz Solutions HF38B Manual

20 September 2025

Gigahertz Solutions MK10 Manual

19 September 2025

Gigahertz Solutions ME 3030B Manual

19 September 2025

Gigahertz Solutions CFA40-1 Manual

19 September 2025

Gigahertz Solutions ME 3840B Manual

19 September 2025

Evolveo PIR Manual

19 September 2025

Gigahertz Solutions HF35C Manual

19 September 2025

Gigahertz Solutions ME 3830B Manual

19 September 2025