ESI Amber i4 Manual

ESI DJ udstyr Amber i4

Læs gratis den danske manual til ESI Amber i4 (3 sider) i kategorien DJ udstyr. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om ESI Amber i4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Quick Start Guide

4-in / 4-out Professional 24-bit / 192kHz

USB-C Audio Interface

Introduction

Congratulations on your purchase of Amber i4, a professional 4-in / 4-out USB-C audio

interface with 24-bit / 192kHz for Mac and PC to connect microphones, synthesizers,

guitars and more and to monitor signals via headphones or studio monitors. Amber i4

has a number of innovative features that many comparable products do not have,

because of this we strongly recommend to check this Quick Start Guide in detail and if

needed, to have a look at the full User's Guide that is available on our website

( ).http://en.esi.ms/130

Getting Started

To start using Amber i4, connect it to your computer using one of the included USB

cables. We include cables for so-called "type A" and "type C" ports on the computer. If

you want to connect it to a mobile device such as an iPhone or iPad, you might need an

adapter - depending on the device. Once connected, turn it on with the power switch

that is located on the backside. The LCD will greet you with an i4 logo while powering

up. It is a good time now to either connect headphones to the first headphone connector

on the front or to use the TRS outputs on the back to connect the interface to active

studio monitors. You will not be able to listen to any audio signals otherwise.

On the Mac, Amber i4 does not require any drivers to be used (plug-and-play), however

you can download a control panel application on our website (http://en.esi.ms/130 ) that

is strongly recommended. On iPhone or iPad, most audio apps will automatically use

the interface after it has been connected. For Windows users, we provide a driver

optimized for professional audio applications (incl. ASIO support) that is available for

download ( ). Also the driver installs the control panel application http://en.esi.ms/130

that you need to use to control many of the advanced features.

Recording and Playback

To check if Amber i4 is working with your computer, it is best to play music as a test

signal via headphones or your studio monitors. Make sure you set the output volume not

too loud for your ears.

You can record audio in your favorite audio application (i.e. a DAW like Bitwig Studio

8-Track or an audio recorder like WaveLab LE) after selecting Amber i4 as recording

and playback device in its settings dialog (refer to the manual of your software).

Once you start the recording process of microphone or guitar signals, slowly turn up the

corresponding gain knob clockwise until the input level meters on the LCD screen and

in your software show a proper signal level. Orange usually indicates an optimal level

and red means that the level is too high (i.e. the signal clips) and the gain has to be

reduced. no gain adjustment is required.When recording line level signals,

Produkt Specifikationer

Mærke:	ESI
Kategori:	DJ udstyr
Model:	Amber i4

Har du brug for hjælp?

Hvis du har brug for hjælp til ESI Amber i4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

DJ udstyr ESI Manualer

30 Marts 2025

30 Marts 2025

28 November 2022

17 Oktober 2022

DJ udstyr Manualer

Nyeste DJ udstyr Manualer

DNA MIX 4 Manual

9 Juni 2025

DNA ME-16FX Manual

9 Juni 2025

TC Helicon Fuse Manual

3 Juni 2025

UDG Gear AlphaTheta XDJ-AZ Manual

8 Marts 2025

Roadstar TT-380BT-T Manual

19 Februar 2025

Roadstar HIF-1580BT Manual

18 Februar 2025

Roadstar TTR-630WD Manual

18 Februar 2025

Rane MP2015 Manual

9 Februar 2025

Rane Seventy Manual

9 Februar 2025

Korg Nu:Tekt NTS-3 Manual

1 Februar 2025