Estella CMPT16A Manual


Læs gratis den danske manual til Estella CMPT16A (11 sider) i kategorien Crepe maker. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Estella CMPT16A, eller vil du spørge andre brugere om produktet?

Side 1/11
# 3 4 8 C M PT 1 6 A SINGLE
# 3 4 8 C M X 1 6 D B L M DOUBLE
C R E P E M A K E R S
CONFORMS TO UL STD. 197
CONFORMS TO NSF/ANSI STD. 4
5025815 5025815
U S E R M A N U A L
200°F
150°F
250°F
350°F
5
50 °F
HI
MIN
w w w. E s te l l a E q u i p m e n t .c o m2
The serial plate is located on the back of the unit.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All equipment should be examined for damage before and during
unloading. The freight carrier has assumed responsibility for its safe
transit and delivery. If equipment is received damaged, either apparent
or concealed, a claim must be made with the delivering carrier.
a) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed by
the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can supply
the necessary forms.
b) If concealed damage is not apparent until after equipment is uncrated, a request for inspection must be
made to the carrier within 5 days. The carrier should arrange an inspection. Be certain to hold all contents
and packaging material.
Installation and service should be performed by a qualified installer who thoroughly reads, understands, and
follows these instructions. If you have questions concerning the installation, operation, maintenance, or service
of this product, visit Estella Equipment at www.estellaequipment.com.
I N D E X
Introduction .................................................... 2
Location Of Data Plate ................................ 2
Safety Precautions ...................................3, 4
Note For The First Time Use 4 .....................
Seasoning The Griddle ............................... 5
Operating Steps ........................................6, 7
Care And Cleaning ....................................... 8
Tips And Maintenance ..................... 8, 9, 10
Digital Board Error
Code Troubleshooting ...............................10
General Troubleshooting Issues ........11, 12
I N T R O D U C T I O N
Congratulations on your purchase of Estella Equipment. Estella Equipment takes pride in the design and quality
of our products. When used as intended and with proper care and maintenance, you will experience years
of reliable operation from this equipment. To ensure best results, it is important that you read and follow the
instructions in this manual carefully.
Item: 348CMPT16A
Product Description:
SINGLE CREPE MAKER, PORTABLE
Voltage: Wattage: | 120V 2300W
Phase: Hertz: | 1 Phase 60 Hertz
Amperage: Plug Type: | 19A 5-20P
Serial NUMBER:
CONTROL#
WARNING! Improper installation, adjustment, alteration, service or maintenance can
cause property damage, injury or death. Read the installation, operating, and
maintenance instructions thoroughly before installing or serving this equipment.
Commercial use only. Disconnect from electric supply before adjustment, WARNING!
alteration, service or maintenance. Do not immerse in water.
MADE IN CHINA
CONFORMS TO UL STD. 197
CONFORMS TO CSA C22.2 NO. 109
CONFORMS TO NSF/ANSI STD. 4
Example of serial plate.


Produkt Specifikationer

Mærke: Estella
Kategori: Crepe maker
Model: CMPT16A

Har du brug for hjælp?

Hvis du har brug for hjælp til Estella CMPT16A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Crepe maker Estella Manualer

Estella

Estella CMPT16A Manual

15 Juni 2025

Crepe maker Manualer

Nyeste Crepe maker Manualer