Eventide Rose Manual


Læs gratis den danske manual til Eventide Rose (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 142 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 71.5 anmeldelser. Har du et spørgsmål om Eventide Rose, eller vil du spørge andre brugere om produktet?

Side 1/2
Rose User Guide Addendum (Beta 3.0)
Presets
The Rose pedal has 5 banks of presets to choose from, each bank containing 5 presets for a
total of 25 presets.
Loading Presets Using the Footswitches
To Load a Preset from the currently selected Bank
- Press ACTIVE + HOTSWITCH (Footswitch LEDs = Orange)
- Tap HOTSWITCH to select Preset Slot indicated by the PRESET ladder
- Press ACTIVE to load Preset
To Change Preset Bank
- Press ACTIVE + HOTSWITCH (Footswitch LEDs = Orange)
- Hold HOTSWITCH alone until SHAPE LED is lit.
- Tap HOTSWITCH to select Preset Bank indicated by the SHAPE ladder
Loading Presets Using the Buttons
To Load a Preset from the currently selected Bank
- Momentarily press PRESET (PRESET + SHAPE LEDs are blinking)
- Press PRESET Button to select Preset Slot indicated on the PRESET ladder
- Preset loads when PRESET + SHAPE LEDs stop blinking
To Change Preset Bank & Load Preset
- Momentarily press PRESET (PRESET + SHAPE LEDs are blinking)
- Press SHAPE Button to select Preset Bank indicated by the SHAPE ladder
- Press PRESET to select a Preset Slot indicated on the PRESET ladder
- Preset loads when PRESET + SHAPE stop blinking
Saving Presets
- Press & Hold PRESET Button until PRESET + SHAPE LEDs are blinking
- Press SHAPE Button to select target Preset Bank
- Press PRESET to select target Preset Slot
- Hold PRESET Button until PRESET & SHAPE LED flashes rapidly
- Preset is now saved in selected Bank and Slot
MIDI Clock:
- Hold ACTIVE + PHI until all LEDs are on
- Press PHI to enable MIDI clock (bottom most Shape ladder LED lit) or disable MIDI clock
(all SHAPE ladder LEDs off)
- Press ACTIVE or HOTSWITCH to exit
Bypass Mode/Kill-dry Mode:
- Hold ACTIVE + PHI until all LEDs are on
- Press PRESET to toggle different Bypass Modes (Buffer, Relay or Input Kill)
- Each Bypass Mode can stand alone or be paired with Kill-dry Mode
- Kill-dry is indicated by the bottom LED on the PRESET ladder
- Press ACTIVE or HOTSWITCH to exit
Hotswitch/Tap Tempo Divisions:
- Hold SHAPE Button until SHAPE + PRESET are blinking
- Press SHAPE Button to assign HOTSWITCH function to Tap Tempo (first LED)
- Press PRESET Button to select tap tempo/tap LFO divisions
- Available divisions are ¼ (top LED of Preset Ladder lit), ⅛, dotted ⅛ and triplet
- Press ACTIVE or HOTSWITCH to exit
AUX Switch:
- Hold HOTSWITCH + DELTA until PRESET and SHAPE are blinking
- Press SHAPE Button to cycle through Tap, Inf Rpt, Mod Hold, Mod Rst, A/B, PHI,
DELTA, Bypass, Preset Load, Decrement Preset (Hotswitch LED green), Increment
Preset (Hotswitch LED red) and Unassigned
- To assign AUX to BYPASS press SHAPE until ACTIVE LED is red
- To assign AUX to Preset Load press SHAPE until ACTIVE LED is yellow
- Press ACTIVE or HOTSWITCH to exit
Envelope Detune Effect:
- Press SHAPE Button to select Envelope Modulation on SHAPE ladder
- Set RATE knob fully counterclockwise
- Change DEPTH value using knob, Exp Pdl or MIDI


Produkt Specifikationer

Mærke: Eventide
Kategori: Ikke kategoriseret
Model: Rose

Har du brug for hjælp?

Hvis du har brug for hjælp til Eventide Rose stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Eventide Manualer

Eventide

Eventide BD600E+ Manual

7 August 2025
Eventide

Eventide Riptide Manual

1 September 2024
Eventide

Eventide Space Manual

27 August 2024
Eventide

Eventide Misha Manual

2 December 2023
Eventide

Eventide Rose Manual

15 November 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer