EverFocus EM200 Manual

EverFocus Overvågningskamera EM200

Læs gratis den danske manual til EverFocus EM200 (1 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om EverFocus EM200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

EM100/200 CCD Camera

INSTRUCTION

MANUAL

1/3"Metal Case Cameras

II. Precautions

• Do not expose the camera to humidity and dust. Outdoor

application without shielding is not recommended.

• Handle with care. This camera consists of high sensitive

parts. Do not disassemble it or place it on an unstable base.

• Do not touch the surface of CCD sensor by hand directly.

When the camera is not in use, put the cover cap on the lens.

• Operate on +12VDC (Use a regulated power source only).

• Never face the camera toward the sun.

IV. Specifications

EM100/200 is a compact, full functioned CCD Camera. Its

stylish appearance can be applied as per installer's ideal

locations. The metal case of camera can be mounted either on

the ceiling or on the wall easily. EM100/200 uses high sensitive

1/3" interline transfer CCD sensor. EM100/200 is featured with

Auto Electronic Shutter and Automatic Gain Control.

I. General

III. Installation Instructions

Decide the location to install the metal case camera. The horizontal

view angle of the metal case camera with 3.6 mm lens is 92-degree.

oIn application, the metal case camera can be installed as the

following four positions :

1) Ceiling mount

2) Floor mount

3) Wall mount, aim to right

4) Wall mount, aim to left

pIn order to get the correct picture, please always keep

the cable connector on the bottom side.

1) Ceiling Mount :

The metal case camera are set in the actual position

when the shipment is made. They are ready to be

installed.

2) Floor Mount :

Rotate the metal case in 180-degree so that the

connector is on the bottom side.

3) Wall Mount, aim to right :

Remove the metal case from the supporting bracket

by using screw driver to loosen the two screws,

which connect the case to the bracket. Turn the

metal case in 90-degree and mount into the supporting

bracket again by changing the screw holes in order to

keep the screw indicator on the bottom side.

4) Wall Mount, aim to left:

Remove the metal case from the supporting bracket

by using screw driver to loosen the two screws, which

connect the iron case to the supporting bracket. Turn

the metal case in 90-degree and mount into the supporting

bracket again by changing the screw holes in order to keep

the screw indicator on the bottom side.

Note: Before installing, please make sure the washer is at its

original position, or PCB may be damaged. (Please refer to the

diagram shows below)

qConnect the video output of the camera (yellow line) to a

monitor, or other video device through a 75 ohm type coaxial cable

with BNC female connector at cable extension.

rConnect the +12VDC regulated power source of the camera (red

line) to the 12VDC Power-in jack with 2 mm, center+, outer- plug.

sConnect the ground of the camera (black line) to the ground.

tConnect the audio output line of the camera (white line) to the

audio connector of the monitor.

P/N: MEM1G0010D VerE

Your EverFocus product is designed

and manufactured with high quality

materials and components which can

be recycled and reused.

This symbol means that electrical

and electronic equipment, at their

end-of-life, should be disposed of

separately from your household

waste.

Please, dispose of this equipment at

your local community waste

collection/recycling centre.

In the European Union there are

separate collection systems for used

electrical and electronic product.

Please, help us to conserve the

environment we live in!

Ihr EverFocus Produkt wurde

entwickelt und hergestellt mit

qualitativ hochwertigen Materialien

und Komponenten, die recycelt und

wieder verwendet werden können.

Dieses Symbol bedeutet, dass

elektrische und elektronische Geräte

am Ende ihrer Nutzungsdauer vom

Hausmüll getrennt entsorgt werden

sollen.

Bitte entsorgen Sie dieses Gerät bei

Ihrer örtlichen kommunalen

Sammelstelle oder im Recycling

Centre.

Helfen Sie uns bitte, die Umwelt zu

erhalten, in der wir leben!

FCC/CE Certifications

C to +50

C ; 32

F~122

F(20%~80% Humidity)

Operating

Temperature

0.09kg ; 0.20lbsWeight

36mm(W) x 36mm(D) x 31mm(H) ;

1.42"(W) x 1.42"(D) x 1.22"(H)

Dimensions

3W max.

Power

Consumption

12VDCPower Source

M12 x P0.5Lens Mount

Internal Sync.Sync. Mode

BNC 1.0Vp-p, 75 ohmVideo Output

0.45

Gamma

Correction

Yes

Automatic Gain

Control

1/50(1/60)~1/100,000Electronic Shutter

Over 48 dB (AGC off)S/N Ratio

0.3 Lux/F=1.2

0.04 Lux/F=1.2Sensitivity

380 TV lines

(NTSC)

420 TV lines

Horizontal

Resolution

510 x 492 (NTSC)

500 x 580 (PAL)

510 x 492 (EIA)

500 x 582 (CCIR)

Picture Elements

NTSC or PAL

NTSC or PALVideo Format

1/3" SONY Super

HAD CCD

1/3" SONY B/W CCDPickup Device

EM200EM100

Produkt Specifikationer

Mærke:	EverFocus
Kategori:	Overvågningskamera
Model:	EM200
Bredde:	43 mm
Dybde:	43 mm
Højde:	59 mm
Vægt:	136 g
Brugervejledning:	Ja
Produktfarve:	Sort
Formfaktor:	Konveter
Relativ luftfugtighed ved drift (H-H):	20 - 80 %
Format til analogt signal:	NTSC, PAL
Ethernet LAN:	Ingen
Strømforbrug (typisk):	3 W
Driftstemperatur (T-T):	0 - 50 °C
Maksimal opløsning:	510 x 492 pixel
Husmateriale:	Metal
Kabler inkluderet:	BNC
Forbindelsesteknologi:	Ledningsført
Certificering:	FCC/CE
DC-in-stik:	Ja
Monteringstype:	Væg
Understøttet placering:	Indendørs
Hvidbalance:	Automatisk
Sensortype:	CCD
Optisk zoom:	- x
Grænseflade:	BNC
Strømforbrug:	200 mA
Minimumsbelysning:	0.3 Lux
Optisk sensorstørrelse:	1/3 "
DC udgangsspænding:	+12V
Brændviddeområde:	2.5 - 16 mm
Kameraets lukkerhastighed:	1/100000 sek./side
Signal/støjforhold:	48 dB
F-number (relativ aperture):	1.2
Antal TV-linier:	380
NTSC opløsninger:	510 x 492 pixel
PAL opløsninger:	500 x 582 pixel