8 EMV1200 FHD / EMV 00 FHD Hybrid Mobile DVR
1
1. Introduction
The latest EverFocus digital video recorder generation is based on H.264 compression
technology, resulting in enhanced recording capacity and improved network image transmission
speed with high image quality. The EMV800 FHD / EMV1200 FHD can support both of analog
(AHD/TVI/SD) and IP cameras, delivering up to 1080p (analog) and up to 4MP . (IP) image quality
Its comprehensive features along with the embedded 3- -axis g sensor function enable the almost
universal application of this mobile DVR series. It supports various interfaces such as alarm I/O,
three USB ports, one - - RS 485 and three RS 232 for connecting to devices such as Panic Button or
CAN bus. You can also optionally connect receiver, 3G, 4G and WiGPS -Fi Antenna to the mobile
DVR. The design of RCA video/audio outputs at front panel makes your installation easy. You
can install one .5”hard disk or SSD in the mobile DVR. You can also install one SD Card for 2
alarm event backup recording. The User Interface has been specially designed to fit mobile
small-sized monitor.
EMV800 FHD / EMV1200 FHD are equipped with anti-shock and anti-vibration housing. The
a viation M12 connectors are also equipped. The power supply supports voltage regulator, and
delay on/off. In addition, the mobile DVRs are SAE-J1455, EN50155, E-Mark, CE and FCC
certified.
You can use EverFocus Mobile Applications, MobileFocus, to remotely view the camera streams
from the mobile DVR through your handheld devices; or use EverFocus Xfleet system for remote
fleet management You can also use EverFocus EF. -Reader to remotely back up recordings from
the HDD/SD card of the mobile DVRs. The mobile DVR series is the ideal solution for your mobile
surveillance needs.
Minimum System Requirements
Before installing, please check that your computer meets the following system requirements.