EverFocus Polestar II ED610 Manual

EverFocus Overvågningskamera Polestar II ED610

Læs gratis den danske manual til EverFocus Polestar II ED610 (32 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 24 anmeldelser. Har du et spørgsmål om EverFocus Polestar II ED610, eller vil du spørge andre brugere om produktet?

Side 1/32
1/3” CCD Color Day/Night
plus Wide Dynamic Range
Outdoor Vandal Dome Camera
Operation Instructions
Model No. ED610
Please read this manual first for correct installation and operation. This manual should be retained for future reference.
The information in this manual was current when published. The manufacturer reserves the right to revise and improve
its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers
since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials
other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight or may cause permanent damage to the sensor and/or internal circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any dirt from the
camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens.
Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within -10 ~ 50 (14 ~122 ) and in an IP66 complaint environment; this ℃ ℃
device is not rated as submersible. The input power source is 12VDC/24VAC.
- 1 -
TABLE OF CONTENTS
1. PRODUCT OVERVIEW............................................................................................................... 3
1.1 Main Features ............................................................................................................................................... 3
1.2 Content List................................................................................................................................................... 3
1.3 Specifications................................................................................................................................................ 5
1.4 Dimensions...............................................................................................................................6
1.5 Camera Component Description ................................................................................................. 7
1.6 Front and Back Panel Layout......................................................................................................8
1.7 Related Products ....................................................................................................................9
2. INSTALLATION ................................................................................................................... 10
2.1 Mounting Camera.................................................................................................................... 10
2.1 .1 Drill the Holes .......................................................................................................................................... 10
2.1.2 Mounting...................................................................................................................................................11
2.2 Adjusting Camera....................................................................................................................13
2.2.1 Adjusting Camera Position ......................................................................................................................... 13
2.2.2 Adjusting Zoom and Focus......................................................................................................................... 14
2.2.3 Camera Setting ....................................................................................................................16
2.2.3.1 OSD User Setup Menu ........................................................................................................................... 16
2.2.4 Close the Camera Cover (after installation is complete) ................................................................................ 16
3. OSD MENU & CONFIGURATION...............................................................................................18
3.1 Access the user setup menu screen............................................................................................................... 18
3.2 ED610 Menu Tree........................................................................................................................................ 19
3.3 LENS.......................................................................................................................................................... 22
3.4 EXPOSURE................................................................................................................................................ 22
3.4.1 SHUTTER................................................................................................................................................ 22


Produkt Specifikationer

Mærke: EverFocus
Kategori: Overvågningskamera
Model: Polestar II ED610
Kode for international beskyttelse (IP): IP66
Bredde: 123 mm
Dybde: 123 mm
Højde: 107.8 mm
Vægt: 740 g
Produktfarve: Sølv
Wi-Fi: Ingen
Formfaktor: Kuppel
Relativ luftfugtighed ved drift (H-H): 20 - 80 %
Format til analogt signal: NTSC, PAL
Ethernet LAN: Ingen
Driftstemperatur (T-T): -10 - 50 °C
Maksimal opløsning: - pixel
Forbindelsesteknologi: Ledningsført
Certificering: CE, FCC
Webbaseret administration: Ingen
Indbygget kortlæser: Ingen
Indbygget HDD: Ingen
Effektkrav: 12 - 24 VAC
Understøttet placering: Udendørs
Hvidbalance: Auto, Manual
Sensortype: CCD
Optisk zoom: - x
Digital zoom: 32 x
Grænseflade: BNC
Strømforbrug: 3 mA
Strøm over Ethernet (PoE): Ingen
Dag/nat funktion: Ja
Minimumsbelysning: 0.0002 Lux
Optisk sensorstørrelse: 1/3 "
Nattesyn: Ja
Bevægelsessensor (video): Ja
Brændviddeområde: 9 - 22 mm
Kameraets lukkerhastighed: 1/60 - 1/100000 sek./side
Signal/støjforhold: 52 dB
F-number (relativ aperture): 1.2
Kamera lukker type: Elektronisk
Antal TV-linier: 560
NTSC opløsninger: 768 x 494 pixel
PAL opløsninger: 752 x 582 pixel
Alarmindgang/-udgang: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til EverFocus Polestar II ED610 stil et spørgsmål nedenfor, og andre brugere vil svare dig