Extech 380193 Manual

Extech Måling 380193

Læs gratis den danske manual til Extech 380193 (12 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 87 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 44 anmeldelser. Har du et spørgsmål om Extech 380193, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

User Manual

Passive Component LCR Meter

Model 380193

Additional User Manual translations available at www.extech.com

2 - -US_V2.7 02/22 380193 en

INTRODUCTION

Congratulations on your purchase of the Extech Model 380193 LCR meter. This meter wi ll

accurately measure capacitors, inductors and resistors using the test frequencies of 120Hz and

1 kHz. The dual display will simultaneously display the associated quality factor, dissipation or

resistance value using a series or parallel equivalent circu . it

The included RS-232c PC interface feature with Data Acquisition permits the user to capture

readings to a PC for data storage, viewing, printing, and exporting to spreadsheet for graphing

and other data manipulation tasks.

This meter is shipped fully tested and calibrated and, with proper use, will provide years of

reliable service.

International Safety Symbols

Caution ! Refer to the explanation in this Manual

Caution ! R k of electric shock is

Earth (Ground)

Safety Precautions

1. Make sure any covers or battery doors are properly closed and secured.

2. Always remove the test leads before replacing the battery or fuses.

3. Inspect the cond ion of the test leads and the meter itself for any damage it

before operating the meter. Repair or replace any damage before use.

4. To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

5. Do not exceed the maximum rated i ut limits. np

6. Always discharge capacitors and remove power from the device under test

before performing Inductance, Capacitance, or Resistance.

7. Remove the battery from the meter if the meter is to be stored for long periods.

Produkt Specifikationer

Mærke:	Extech
Kategori:	Måling
Model:	380193

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech 380193 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Extech Manualer

Extech 475040-SD Manual

30 Juli 2025

Extech 475044-SD Manual

30 Juli 2025

7 Juni 2025

6 Juni 2025

17 Marts 2025

22 Oktober 2024

22 Oktober 2024

6 April 2024

4 April 2024

23 Marts 2024

Måling Manualer

Nyeste Måling Manualer

Kern ORA 3HA Manual

30 Juli 2025

Phoenix Contact EEM-XM377 Manual

30 Juli 2025

Phoenix Contact EEM-XM357 Manual

29 Juli 2025

Teslong TM160P Manual

29 Juli 2025

Mitsubishi SRK25MWKH1 Manual

27 Juli 2025

Mitsubishi SRK50EEC1 Manual

27 Juli 2025

Mitsubishi SRK35RE1 Manual

27 Juli 2025

Ridgid RT-3 Manual

27 Juli 2025

Mitsubishi SRK25ZSXH-S Manual

27 Juli 2025

Ridgid micro CA-150 Manual

27 Juli 2025