Extron 70-1065-30 Manual


Læs gratis den danske manual til Extron 70-1065-30 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Extron 70-1065-30, eller vil du spørge andre brugere om produktet?

Side 1/2
Retractor SM Horizontal Bracket • Installation Guide
The Cable Retractor SM series requires this mounting bracket for horizontal
installations. Use the Horizontal Mounting Bracket to x the Retractor under the
table. Slotted holes allow for tolerance in placing the bracket.
See the at Retractor SM Installation Guide www.extron.com prior to beginning this
installation.
ATTENTION:
Ensure the supplied screws do not pierce through the top of the table. If
necessary, use appropriate screws based on the table material and thickness.
nécessaire, utilisez des vis plus appropriées en fonction du matériau de la table
et de son épaisseur.
Trace around
bracket perimeter.
End Caps
NOTE: Be certain the system is perpendicular to the enclosure to prevent
binding of the pulley system.
3. Ensure the bracket is ush with surface and trace a line around the bracket
perimeter.
4. Lower the assembly and remove the Horizontal Bracket from the Retractors.
To ensure accuracy follow these procedures:
1. With the Retractors installed in the enclosure, attach the horizontal mounting
bracket to the Retractor end caps using the provided pin and clip.
2. Raise the Retractors with attached
bracket to the desired mounting
location.


Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: 70-1065-30
Antal pr. pakke: 1 stk
Produktfarve: Sort
Maksimal belastningsvægt: - kg

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron 70-1065-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig