Extron Cable Cubby 1252 Manual

Extron Ikke kategoriseret Cable Cubby 1252

Læs gratis den danske manual til Extron Cable Cubby 1252 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Extron Cable Cubby 1252, eller vil du spørge andre brugere om produktet?

Side 1/2
1
Cable Cubby 1252 MS Lid Tray Kit •
Installation Guide
This guide provides instructions for an experienced technician to install the Extron
Cable Cubby 1252 MS Lid Tray Kit onto the Cable Cubby 1252 MS enclosure. The lid tray
offers a clean nished edge for the lid insert material.
The surface-matching Cable Cubby 1252 MS is a furniture-mounted enclosure for cable access,
connections, and AC power. The Cable Cubby 1252 MS provides the freedom to either match the surface of
the table or use a unique lid design that complements your décor. Unused cables can be stored out of the way while remaining
Planning
Check all parts and equipment before installation
Ensure that all parts are present in the kit.
Ensure that necessary tools (Phillip’s head screwdriver and, potentially, shims or putty) are available for the installation.
Kit Contents
Part Quantity Part Quantity
Lid tray
1 #4-40 at head lid tray screws
4
#6 at head lid insert
wood screws
4
Preparing the Cable Cubby 1252 MS and Table
See the for the steps necessary to prepare the Cable Cubby enclosure for installation of Cable Cubby 1252 MS Installation Guide
the lid. The lid tray is to be installed in place of the fabricated lid in that guide.
NOTE: If you are surface-matching the table for the lid insert material:
See “Cutting the Lid Insert Material,” below.
Make the cut as accurate as possible, the cutout piece can be used for the lid insert to be attached to the lid tray.
Cutting the Lid Insert Material
8.375"
(212.7 mm)
4.25"
0.70" MA
X
(107.9 mm)
(17.75 mm)
(Varying
thickness)
ers
(107
.
9
(
3.0 mm
)
Radius
C
orn
0.12"
1. Cut a piece of lid insert material to the dimensions shown at
right, as accurately as possible.


Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: Cable Cubby 1252

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron Cable Cubby 1252 stil et spørgsmål nedenfor, og andre brugere vil svare dig