Extron Cable Cubby F55 Edge Manual

Extron Ikke kategoriseret Cable Cubby F55 Edge

Læs gratis den danske manual til Extron Cable Cubby F55 Edge (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Extron Cable Cubby F55 Edge, eller vil du spørge andre brugere om produktet?

Side 1/8
1
Retractor Modules for Cable Cubby F55 Edge •
Installation Guide
This guide provides instructions for an
experienced technician to install the Extron
retractor modules for the CableCubby® F55 Edge
Enclosure.
Additional information is available in the
Cable Cubby F55 Edge Installation Guide at
www.extron.com.
NOTE: For information on safety
guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and
related topics, see the Extron Safety
and Regulatory Compliance Guide on
the Extron website.
Planning
The retractor module can be mounted in the vertical or horizontal orientation. The retractor module should be set depending on
the under-table clearance and accessibility. One retractor module can be installed in any one vacant Flex55 space.
For new installations, to determine the best location for the enclosure, keep in mind the under-table space required for the
retraction system (see Determining Under-table Clearance on page2 for more information).
Kit Contents and Optional Accessories
Ensure you have the required parts for mounting the retractor module and to congure the enclosure. The following items are
provided in the retractor bracket kit for the Cable Cubby F55 Edge enclosure:
Pin
1/4"-20 Screws
Retractor
Bracket
odule
(black & white)
Retractor
Bezel
Optional
Retractor
F
55
M
O
ptiona
l
E
xtro
n
C
able
C
ubby F55 Edg
e
Clip
Figure 1. Kit Contents and Accessories
USB CHAR GER
120V 50-60 Hz 6A MA X
~
IMPORTANT:
Go to www.extron.com for the
product specifications.
2
Retractor Modules for Cable Cubby F55 Edge • Installation Guide (Continued)
Determining Under-table Clearance
Ensure the retractor system has adequate under-table clearance for installation.
CAUTION: Disconnect the power from the Cable Cubby enclosure before beginning a retractor system installation.
ATTENTION : Débranchez l’alimentation du boîtier CableCubby avant de commencer l’installation d’un système de rétracteur.
Follow the retractor installation instructions (see starting on page3) to determine a suitable mounting location.
Installation
Figure 2 shows the space required for a retractor system installation in a Cable Cubby F55 Edge enclosure.
NOTES:
To prevent objects from impeding cable retraction, ensure the exposed cable clears nearby obstructions.
Excess cabling can cause clearance issues. Use zip ties to secure under-table cabling to prevent accidental contact
or entanglement with users.
Mounting Orientations and Dimensions
Determine whether the retractor modules will be installed in the horizontal or vertical orientation. A retractor module can be
installed in any available opening in the Cable Cubby F55 Edge enclosure.
Horizontal Mounting
Vertical Mounting
Retractor Series Retractor Series XL
Retractor Series
Retractor Series XL
28.49"
(724 mm)
8.54"
(217 mm)
12.50"
(318 mm)
18.11"
(460 mm)
8.54"
(217 mm)
18.50"
(470 mm)
24.10"
(612 mm)
22.49"
(572 mm)
Figure 2. Cable Cubby F55 Edge with Retraction System — Mounting Orientations and Dimensions


Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: Cable Cubby F55 Edge

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron Cable Cubby F55 Edge stil et spørgsmål nedenfor, og andre brugere vil svare dig