Extron Retractor SM VGA Manual

Extron Ikke kategoriseret Retractor SM VGA

Læs gratis den danske manual til Extron Retractor SM VGA (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Extron Retractor SM VGA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

IMPORTANT:

Go to www.extron.com for the

complete user guide

, installation

instructions, and specifications.

Retractor SM • Installation Guide

This guide provides basic instructions for an experienced technician to quickly install the Extron

Retractor SM Show Me® cable retraction modules in an Extron TeamWork® Collaboration System and

in compatible Cable Cubby enclosures.

Additional instructions are available in the TeamWork Collaboration System Installation Guide and the

installation guides for the individual Cable Cubby® enclosures and the . All Retractor SM User Guide

are available at www.extron.com.

NOTE: For information on safety guidelines, regulatory compliances, EMI/EMF compatibility,

accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide

on the Extron website.

Planning

Retractor SM modules can be mounted in a horizontal, vertical, or angular orientation depending upon under‑table clearance and

accessibility.

Horizontal mounting is recommended to provide maximum legroom and to protect the Retractors against accidental damage.

Be certain the Horizontal Mounting Bracket can be fastened under the table or on a table support without bending the pulley

system or forcing it from a perpendicular angle with the enclosure (see the Top View diagram on page3).

Vertical mounting is used where insufcient under‑table space exists for horizontal mounting or where under‑table access is

limited. Ensure the Retractor SM modules hang freely without touching the oor and are not obstructed under the table.

Angular mounting is used where insufcient under‑table space exists for horizontal mounting and tabletop to oor clearance

prevents vertical mounting. An additional mounting hole allows installation at an angle providing extra oor clearance.

• For horizontal mounting, a Retractor SM Horizontal Bracket Kit is required.

• A Retractor SM Filler Module is required to occupy unused Retractor space.

• Depending on the enclosure, various Retractor SM Mounts are available, both Triple and Quad.

NOTE: See the for a list of compatible Retractor SM Mounts and brackets to suit the application and Extron website

enclosure.

Mounting kits, bracket kits, ller modules, and accessories are available at www.extron.com.

For new installations, to determine the best location for the enclosure, keep in mind the under‑table space required for the

retraction system. Refer to the enclosure installation guide for mounting.

NOTE: Before starting an installation, determine if additional hardware is needed.

Required Tools and Additional Accessories

Horizontal Mounting

Bracket (Optional)

Retractor SM

Mount - Triple

Retractor SM

Mount - Quad (x2)

-or-

Retractor SM

Mount - Triple

(x4) (x4)

(x2)

(x3)

Filler Module

(Optional)

(x2)

( 2

)

Tape Measure Phillips Screw Driver Zip TiesMarking Pen Tweeker

Retractor SM • Installation Guide (Continued)

Getting Started — Determine Under-table Clearances

Follow the installation instructions provided in your Cable Cubby enclosure package to determine a suitable mounting location.

The diagrams that follow show the space required for a Retractor SM module installation in a compatible enclosure.

NOTES:

• To prevent objects from impeding cable retraction, ensure the exposed cable clears nearby obstructions.

• Excess cabling can cause clearance issues. Use zip ties to secure under‑table cabling to prevent accidental contact or

entanglement.

The Retractor SM module is mounted from below the enclosure.

Retractor SM

Horizontal Mounting Vertical Mounting Angular Mounting

15.2 in.

(386 mm)

25.7 in.

(653 mm)

27.4 in.

(696 mm)

8.3 in.

(211 mm)

14.4 in.

(366 mm)

13.3 in.

(338 mm)

17.7 in.

(450 mm)

Cable Cubby 1202

Cable Cubby 700

14.8 in.

(376 mm)

13.4 in.

(341 mm)

8.7 in.

(220 mm)

27.4 in.

(695 mm)

25.7 in.

(653 mm)

Pigtails

For connections to devices under the table, the Retractor SM

modules have 6feet (1.8m) of pigtail from the exit of the cable

retainer as shown.

6 ft. (1.8 m) Std.

Produkt Specifikationer

Mærke:	Extron
Kategori:	Ikke kategoriseret
Model:	Retractor SM VGA

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron Retractor SM VGA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Extron Manualer

Extron DTP3 IN2004 Manual

14 Juni 2025

Extron CPM 103 Manual

11 Marts 2025

Extron IN1608 XI Manual

10 Januar 2025

Extron ZipClip 100 Manual

3 Januar 2025

Extron HC 402 Manual

3 Januar 2025

Extron ShareLink Pro 2500 Manual

3 Januar 2025

Extron FOX3 SR 301 Manual

3 Januar 2025

Extron TMK 110 D Manual

3 Januar 2025

Extron SMB 210 Manual

3 Januar 2025

Extron FOX3 T 201 Manual

3 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025