Extron SMP 352 Manual


Læs gratis den danske manual til Extron SMP 352 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Extron SMP 352, eller vil du spørge andre brugere om produktet?

Side 1/5
Page 1
Rev. 0.03
Technical Application Note
This Technical Application Note is intended to assist you in configuring Extron Streaming
Updated: May 1 202
Extron Products Affected:
SMP Products
Firmware Versions
SMP 300 Series
3.02 or greater
SMP 111
3.01.0001 or greater
BEFORE YOU START
Before beginning, ensure that your network supports 802.1X security. More information
about the 802.1X technology is provided 1X HERE, in the white paper entitled “802. Primer”.
An Extron Insider account is required to access the white paper.
Extron uses the software to enable and configure the 802.1X protocol on aToolbelt ll
compatible Extron products. You will need to download the Toolbelt software version 2. .0 10
(or greater) using your Extron Insider account from
https://www.extron.com/product/software/toolbelt.
After you have downloaded Toolbelt, you must successfully install the application.
BACKGROUND WHAT IS 802.1X?
802.1X is the IEEE standard for port-based network access control. 802.1X allows a
network administrator to ensure secure communication with a common infrastructure using
certificates from a server referred to as an authenticator server.
Page 2
Rev. 0.03
Technical Application Note
GETTING STARTED
Open Toolbelt
Locate the SMP product you wish to add to your 802.1X deployment
Select the SMP by clicking on the IP address (hyperlink not shown here).


Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: SMP 352

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron SMP 352 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Extron Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer