Extron TLI Pro 201 Manual


Læs gratis den danske manual til Extron TLI Pro 201 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Extron TLI Pro 201, eller vil du spørge andre brugere om produktet?

Side 1/4
Current Firmware Version: 1.00.0001-b008
This document provides a list of certified USB human interface devices (HID) tested by Extron on
the 2TLI Pro 01. Due to the numerous touch devices his list does not all touch available, t represent
devices that are supported.
Updated: 7/ /30 2021
Extron Products Affected: TLI Pro 2 01
TECH NOTES
Out of the box touch device support – The TLI Pro 201 firmware supports most touch devices out
of the box after the calibration process without the need to load HID modules (touch drivers). Refer
to the TLI Pro 201 user manual for more information regarding calibration.
HID module supportIf the touch device you wish to use does not work out of the box, an HID
module loaded to the TLI Pro 201 using Toolbelt. A database of HID modules can be found may be
at http://www.extron.com/download/hidmodules.aspx. Communication sheets detailing
instructions and devices tested are included with each module. Please contact your Extron
representative if an HID module for your touch device is not available.
Unsupported USB Extenders Specific USB extenders that have integrated hubs may not be
supported. These devices may have multiple USB connections or only a single port. The list below
documents devices that have been tested and are known to work.
Powering USB Hubs and Extenders It is highly recommended that USB hubs and extenders be
powered directly using the manufacturer’s power solution. Failing to directly power the connected
hubs and extenders can result in unstable USB connectivity.
Unsupported USB Mice – The TLI Pro 201 natively supports most standard wired or wireless mice
but may not support mice that would require additional drivers when connected to a PC.
KNOWN ISSUES
There are no known issues with Firmware Version 1.00.0001-b008
CERTIFIED TOUCH DEVICES
The table below lists the touch devices certified by Extron to work with the TLI Pro 201. This list
does not represent all touch devices supported.
Manufacturer
Model
Firmware Tested
Remarks
Acer T232HL 1.00.0001 - b008
Acer T231H 1.00.0001- b008
AG Nevevo -TM 23 II 1.00.0001- b008
AG Nevevo -TM 23 1.00.0001- b008
Dell Canvas 27 1.00.0001- b008
E lo ET2202L 1.00.0001-b008
E lo ET2402L 1.00.0001-b008
E lo ET5551L 1.00.0001-b008
Planar EP5024K-T 1.00.0001- b008
UPerfect MDS-156F13 1.00.0001- b008


Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: TLI Pro 201

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron TLI Pro 201 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Extron Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer