Extron VSW 2VGA A Manual

Extron Ikke kategoriseret VSW 2VGA A

Læs gratis den danske manual til Extron VSW 2VGA A (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Extron VSW 2VGA A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

VSW2VGAA • User Guide

The Extron VSW2VGAA is a compact and economical two-input, one-output VGA

switcher with unbalanced stereo audio and 300 MHz (-3 dB) video bandwidth. It

accepts two VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or

HDTV component video inputs. The switcher has two unbalanced stereo audio

inputs and one unbalanced stereo audio output. It also features a buffered local

monitor output for Input 1. A front panel toggle switch, a contact closure controller,

or the autoswitching option can be used for input selection.

This guide contains information about the Extron VSW2VGAA switcher. The

terms “VSW2VGAA” and “switcher” are used interchangeably in this manual.

The Extron VSWIAAP interface, an optional accessory used when several

VSW2VGAA switchers are daisy chained together, is also discussed.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the

FCC rules. The ClassA limits provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

NOTES:

• This unit was tested with shielded ables on the peripheral devices. Shielded cables must be used to ensure I/O c

compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related

topics, see the on the Extron website.

Extron Safety and Regulatory Compliance Guide

Speciﬁcations

Product specifications are available on the Extron website, www.extron.com.

Application Diagram

Up to 10 VSW2VGAA switchers can be daisy chained

together with each switcher input separately fed and

controlled by an optional accessory interface, the VSWIAAP.

Figure 1 is an example of how several such switcher-interface

combinations can be daisy chained together in a boardroom

environment.

By default, all switchers are set to input 2 as the active input.

Therefore, in a daisy chain of switchers the VGA and audio

signals ow from one switcher to input 2 of the next switcher

in the chain. The switchers are daisy chained in this fashion

until the last switcher in the daisy chain outputs to a projector

and audio amplier.

Up to ten switchers can be daisy chained together without

any degradation in picture quality. One power supply powers

up to ve switchers.

COMPUTER

SH MEOWAUDIO

VSW I AAP

In 1

In 2

Extron pre-made VGA with audio cable assemblies.

Expandable, economical presentation chain rfo

conference rooms and library study omro s.

Out In 2

VSW I AAP

VSW 2VGA A

Extron

VSW 2VGA A

VGA Switcher

In 1

Out In 2

VSW 2VGA A

In 1

Out

VSW 2VGA A

VSW I AAP VSW I AAP

Ext nro

VSW I AAP Projector

Projector

Extron

VSW I AAP

Figure 1. Daisy Chaining the Multiple Switchers

VSW2VGAA • User Guide (Continued)

Features

• Inputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks

• Outputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks

• 300 MHz (-3 dB) RGB video bandwidth

• Compatible with VGA-QXGA and HDTV component video signals

• Buffered loop-through for input one

• ID bits from inputs 1 and 2 are routed to the output

• Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.

• Contact closure remote control

• Front panel toggle switch for input selection

• Through-desk, under-desk, and projector-mountable

• 1U, quarter rack width metal enclosure

• External Extron Everlast power supply included — Provides worldwide power compatibility with high-demonstrated

reliability and low power consumption

• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty

Installation Overview

To install and set up the VSW2VGAA for operation, follow these steps:

1. Turn all of the equipment off. Make sure that the video and audio sources (computers, stereos, DVD players, or other

devices), the VSW2VGAA, the output devices (projectors, speakers), and the contact closure control device are all turned off

and disconnected from the power source.

2. If you are going to daisy chain two or more switchers with VSWIAAP control panels, identify the revision of the VSW2VGAA

board (for conguring the VSWIAAPs) and congure the switcher jumpers (see on

Setting the VSW2VGAA Jumpers

page4).

3. If desired, mount the switcher (see on page9).Mounting the VSW2VGAA

4. Attach the cables (see Front Panel Features below and on the next page).Rear Panel Features

5. Connect power cords and turn on the devices in the following order: output devices, contact closure controller, VSW2VGAA

switcher, and input devices.

6. Select an input using the front panel input toggle switch or the contact closure controller.

7. The image should now display, and sound should be audible. If not, ensure that all devices are plugged in and receiving

power. Check the cabling and make adjustments as needed. Select a different input to check for a picture and sound.

Front Panel Features

VSW 2VGA A

INPUT 1

INPUT 2

D E F G

Figure 2. VSW2VGAA Front Panel Features

A — This LED lights green whenever Input 1 (video and audio) is selected.Input 1 LED indicator

B — This LED lights green whenever Input 2 (video and audio) is selected.Input 2 LED indicator

NOTE: The LEDs also serve as power up indicators. When the switcher is powered up, the selected input LED lights.

C — Toggle this switch up to select Input 1. Toggle it down to select Input 2.Input select toggle switch

D — Input VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or HDTV component video through Input 1 video

this female 15-pin VGA connector.

Produkt Specifikationer

Mærke:	Extron
Kategori:	Ikke kategoriseret
Model:	VSW 2VGA A
Bredde:	109 mm
Dybde:	76 mm
Højde:	25 mm
Vægt:	300 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 50 °C
Materiale:	Metal
Certificering:	CE, C-tick, FCC Class A, ICES, VCCI
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Antal VGA-porte (D-sub):	4
Stativ-montering:	Ja
Digital vertikal frekvens:	30 - 170 Hz
VGA (D-Sub) indgangsporte:	3
Digital horisontal frekvens:	15 - 145 kHz
Video porttype:	VGA
Båndbredde:	300 MHz
Rackkapacitet:	1U
Synkroniser indgangsimpedans:	510 ohm (Ω)
VGA (D-Sub) udgangsporte:	1
Sync output impedans:	50 ohm (Ω)