Fantec MR-25D Manual

Fantec Ikke kategoriseret MR-25D

Læs gratis den danske manual til Fantec MR-25D (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Fantec MR-25D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

MR-25D / MR-25DR

2.5” mobile rack

for 2x 2,5” HDD

User Manual

Introduction

The FANTEC MR-25D/MR-25DR is an internal

2 bay enclosure for standard 9.5mm SATA

HDDs. The dimension fit for standard 3.5” drive

bay. The tool-free design is very easy and

provides quick HDD installation. The design is

compatible for all tower, desktop PC and

barebone cases.

Features

Material Plastics & Metall

Interface Power 15PIN & SATA 7PIN

LED Power on & HDD Access

Dimension:

(LxWxH)

101mm(W) x 153mm(D)

x 25mm(H)

Certificate CE and FCC approval

Disk type 2.5"SATA I & II HDD & SSD

Raid Mode MR-25D (None Raid)

MR-25DR (R0/R1/JBOD)

Package contents

Model: MR-25D

Interface: 1x 15pin SATA power connector

2x 7pin SATA connector

Raid mode: Non-RAID (JBOD single mode)

Package: Mobile rack

2x 7pin SATA cables

User manual

Key, Screws

Model: MR-25DR

Interface: 1x 15pin SATA power connector

1x 7pin SATA connector

Raid mode: Raid0, Raid1, JBOD*

Package: Mobile rack

1x 7 Pin SATA Cable

User manual

Key, Screws

*JBOD needs a controller with

Port Multiplier support

JBOD MODE (Single)

Non-RAID (JBOD single mode): The computer

will show up 2 independent drives. This function

is the default setting when you use only one

HDD or 2 HDD (even different models) are

installed.

RAID 0 MODE (Stripping)

Stripping is a method of concatenating multiple

HDDs into one logical unit. It is the automated

process of writing data across multiple HDDs

simultaneously. Stripping is used to increase the

performance. The data are written in “column”

effect. If one HDD fails, all data are lost.

RAID 1 (Mirroring)

Mirroring is the automated process of writing

data to multiple HDDs simultaneously. It is used

to provide data redundancy. If one HDD fails, the

other HDD will continue to store the data and

provide access to it. The failed HDD can be

replaced and the rebuilt will start automatically.

The new HDD can be inserted during working

process of the system.

LED indication MR-25D

LED Off No HDD inserted

LED Blue

Steady

HDD inserted

LED Pink

Blinking

HDD Write / Read Access

LED indication MR-25DR

LED Off No HDD inserted

LED Blue

Steady

HDD inserted

LED Pink

Blinking

HDD Write / Read Access

HDD Rebuilding

LED Red/Blue

Blinking

HDD not initialized

HDD faulty

To initialize HDDs, please set preferred RAID

mode and press RESET button.

When the MR-25DR in rebuilding, the LED of

the new HDD will continues blink pink, and the

LED of the other HDD will blink slowly.

Mobile Rack HDD Installation

Produkt Specifikationer

Mærke:	Fantec
Kategori:	Ikke kategoriseret
Model:	MR-25D
Vægt:	250 g
Produktfarve:	Sort
Dimensioner (BxDxH):	101.5 x 135 x 25.2 mm
Materiale:	Plast
Certificering:	CE, FCC
LED-indikatorer:	Ja
Plug and play:	Ja
Størrelse på lagerdisk:	2.5 "
Antal understøttede lagerdiske:	2
Understøttede dataoverførselshastigheder:	3 Gbit/s
Understøttede lagerdrev brugerflader:	Serial ATA II