Fanvil X1SG Manual

Fanvil Telefon X1SG

Læs gratis den danske manual til Fanvil X1SG (2 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Fanvil X1SG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Installation Guide

Fanvil Technology Co., Ltd

www.fanvil.com

X1SG

Call list

Phonebook

V1.1

- 4 -

Access phonebook:

Add new entry:

1. Press or Dir soft key or Menu > Dir > Local Contacts.

1. Press Dir soft key > Local Contacts > All Contacts or Groups

> Press Add

2. Enter name and number and press OK soft key.

2. Select Contacts or Groups.

3. To dial an entry, press Dial soft key or pickup handset or

press or .

1. Press key or Menu > CallLog > Local Call Logs

2. Scroll through the list using .

3. To dial an entry, press Dial soft key or pickup handset or

press or .

Call Mute

1. Press to Mute the microphone during the call.

2. Press again to un-mute the conversation.

Call forward

1. Press Menu > Features > Call Forward.

2. Select the line, the type of forward, enter the destination

number and status and OK.

Programmable keys

1. You can also conﬁgure shortcuts for the navigation keys,

and which will be available in idle mode.

2. Press Menu > Basic > Keyboard, select among the

conﬁgurable items, and select your desired type and value,

press OK key.

Redial

Do not disturb

1. Press DND soft key, and enable the device do not disturb

mode.

2. Or press Menu > Features > DND, and select the Mode and

Type, and press OK soft key.

1. Press key, redial a call number.

Voice mail

1. To access your voice mailbox, press or Menu > Message

> Voice Message, number of messages will be indicated if

provided by your server or pbx.

2. Select the line and press Play to call.

P/N:CJBA100096B0

Call transfer

Attended transfer:

Blind transfer:

1. Press key or Xfer soft key during the active conversation,

the call is put on hold.

2. Dial the second telephone number.

1. Press key or Xfer soft key during the active conversation,

the call will be on hold.

2. Then enter the 2nd telephone number and press key

or Xfer soft key.

3. When the call is answered, then press key or Xfer soft

key to complete the operation.

Fanvil Technology Co., Ltd

Website: www.fanvil.com

EMail: sales@fanvil.com support@fanvil.com

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618

Add: 10/F Block A, Dualshine Global Science Innovation Center,

Honglang North 2nd Road, Bao'an District, Shenzhen, China

Screen icon

Packaging list

Soft keys

Message waiting indicator

Left and right navigation keys

Up navigation key, Shortcut to call log

Down navigation key, Shortcut to Status

OK key, Shortcut to Menu

Hold key, Hold/Resume the call

Call transfer key

Conference key

Voice messages key

Keys features

IP Phone Handset

Handset Cord

Stand

Power Adapter

(X1SP is optional)

Ethernet Cord

Quick Installation Guide

- 2 - - 3 -

Conﬁguration

Conﬁguration via Phone

1. Press Menu > System (Default password 123)

2. Select Network: To conﬁgure the Network Settings

(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE)

3. Select Accounts: To conﬁgure enable the account, ﬁll the

SIP server address, port, user name, password etc.

Wall Stand

(Buy separately)

Phonebook key

Line keys

Headset key, Activate/deactivate Headset

Redial key, Access to redial the last record

In idle mode: ringer off

In communication mode: mute/un-mute a call

In idle mode or during ringing: increase or

decrease ringer volume

In communication: increase or decrease earpiece,

headset or hands-free volume

Hands-free key, Activate/deactivate hands free

Long press to lock keypad.

Enter PIN to unlock keypad

3. Conﬁgure: Select network/Account etc, and ﬁll the relevant

content.

4. Save the conﬁguration.

Conﬁguration via Web

1. Get the IP address from the phone: Press key, or Menu

> Status > IPv4 / IPv6.

2. Login: Input the IP address in the web browser. The PC and

phone should be in the same IP address segment(The default

username and password are both ‘admin’.)

Language setting

1. Press Menu key > Settings > Basic Settings > Language.

2. Select the desired language and press OK soft key.

Making a call

1. Pre-dialing: enter the phone number and pick up the handset.

2. Direct dialing: lift the handset and enter the phone number.

3. Handsfree: enter phone number and press or vice versa.

4. Headset: enter phone number and press or vice versa.

5. Designated line: press line key, enter phone number and

press dial key.

Accepting a call

Putting a call on hold

3-party conference

1. Once in line with 1st caller, press key or Conf soft key,

1st caller is put on hold.

2. Then call the 2nd number.

3. After, 2nd call is established, press key or Conf soft key to

set up the conference.

1. With the handset: pick up the handset.

2. With a headset: press .

3. With the handsfree: press .

1. Press key or Hold soft key, caller is put on hold.

2. To retrieve the call press key or Resume soft key.

Note: with more than one active call, select desired call with

the navigator keys and use the corresponding soft key to

hold or resume.

Installation the device

Please follow the instructions in below picture to install the

device.

Bracket desktop installation

Wall mounting (Wall Stand need buy separately)

Connecting to the Device

Please connect power adapter, network, PC, handset, and

headset to the corresponding ports as described in below

picture.

① Power port: connect the power adapter.

② Network port: connecting local area network or Internet.

③ PC port: the network port connect to the computer.

④ Headset port: connect headset.

⑤ Handset port: connect IP Phone handset.

Internet PC Headset

Handset

Mute activated

Network storm

In handset mode

In headset mode

Forward call(s)

In hands-free mode

Call is on hold

Keypad locked

VPN activated

VLAN activated

Ringer oﬀ

Received call(s)

Missed call(s)

Dialed call(s)

Do not disturb activated

Call Forward activated

Auto-answering activated

SIP Hotspot activated

New VM Messages

New SMS

Voice Quality

Level of call

Internet connected

Internet is disconnected

No IP address

Produkt Specifikationer

Mærke:	Fanvil
Kategori:	Telefon
Model:	X1SG
Produktfarve:	Sort
Produkttype:	IP telefon
Skærm diagonal:	2.28 "
Skærmopløsning:	128 x 48 pixel
Berøringsskærm:	Ingen
Wi-Fi:	Ingen
Bluetooth:	Ingen
Ethernet LAN:	Ja
Højttalertelefon:	Ja
Kapacitet for telefonbog:	1000 entries
Nummervisning:	Ja
Ethernet LAN-grænsefladetype:	Gigabit Ethernet
Poster i opkaldslog:	600
Antal linjer:	2 Linier
Voice codecs:	G.722
Strøm over Ethernet (PoE):	Ja
Antal medfølgende håndtag:	1 stk