FeiyuTech WG Mini Manual

FeiyuTech Ikke kategoriseret WG Mini

Læs gratis den danske manual til FeiyuTech WG Mini (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om FeiyuTech WG Mini, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Do not power on the gimbal before
completing all the installation steps
WARNING !
POWERING ON / OFF
Power on: Ensure the camera
is mounted securely, then hold
down the function button for 2
seconds to turn on the gimbal.
function button for 3 seconds
to turn off the gimbal.
Panning
Tilting
1
2
3
FY WG
Mini
is a lightweight, yet feature-rich, wearable 2 axis gimbal capable of capturing immersive and fully stabilized footages. It is compatible
with GoPro HERO4/ 3+/ 3 (with optional mounting space for GoPro LCD BacPac) and other cameras with similar dimensions.
The FY WG
Mini
is a miniaturized version of the best-selling FeiYu gimbal, offering exceptional stabilization technology in a wearable
form factor for action cameras. A GoPro T-Clamp adapter is packaged with every FY WG
Mini
. Users can attach the gimbal to any accessories
supporting the GoPro three-prong mount. The FY WG
Mini
also contains two 1/4"-20 tripod mounts on its gimbal body, allowing the gimbal to be
mounted in different orientations to all universal tripod screw mount accessories (including helmets, bikes,
selfie sticks and other accessories).
Operation LED Status Function
Turn On And Switch To
The Mode’s LED Status
Turn Off After
A moment
Power On
Operation LED Status FunctionSound
Two Beeps
Three Beeps Shutdown
The LED light will flash distinctively to indicate different operating modes.
Switch between different operating modes by pressing the function button.
Remove the screws on the
battery compartment,
insert two16340 batteries
and tighten the screws.
Mount the camera carefully
to the mounting bracket
and tighten the screws.
Function
Button
Function
Button
Introduction
Install
4
Accessories
Operation
Hexagonal socket
head cap screw
T-clamp
Accessories for
1/4 inch screws
STEP 1
STEP 2
STEP 3
Remove the L-clamp, use the 3M Adhesive to fix the bottom of
the Gimbal.
Use with GoPro Accessories, mount the provided T-clamp
to the side or the bottom of the gimbal. Attach T-clamp to any
accessories supporting the standard GoPro three-prong
mount.
The gimbal can also be mounted directly to other accessories
using the standard 1/4" tripod mount. Tighten all screws and
ensure it is mounted firmly before using the gimbal.
USB CableUSB Connector
Extension Knurled
Thumb Screw
How to Charging
USB Cable
FY WG Mini 2 Axis Wearable Gimbal is compatible with GoPro HERO4 / 3+ / 3 and
cameras with similar dimensions. Reserved mounting space for GoPro LCD Touch
BacPac
Do not power on the
gimbal before completing
all the installation steps.
Do not power on the
gimbal before completing
all the installation steps.
!
WARNING !WARNING !
Operating Modes and Functions
Operating Modes and Functions
Camera stays in its current orientation. All panning are restricted.
Mode #1 - Tilng Mode
Camera is permitted to tilting up or down. Panning is restricted.
Mode #2 - Lock Mode
Manual Pulling Locking
After the gimbal has been powered on for eight seconds, the tilt angle
can be adjusted manually in the Lock Mode. Adjust the titl angle to the desired position and wait for
0.5 second until the gimbal registers the new angle.
Long Press
For 1 Second
Long Press
For 2 Second
Long Press
For 3 Second
On Constantly Lock Mode
Function Button Quick Reference
Single Tap
LED Flashes Once
Tilting Mode
Charger
Input: DC 5V
Output: DC 4.2V
Type: 16340
M2*6mm
Rechargeable
Battery
Long screwM 1.5 Allen Key T-Clamp
Quick-Release
Buckle
Curved Adhesive
Mounts
3M Adhesive
5V USB Power
Adapter
（Not Included）
Hexagonal
Socket Head
Cap Screw
Forward
Vertical
3M
adhesive
Please choose one installing way:
1
2
3
Video Output
and Camera
Charging Cable
Function
Button
（
ON
/
OFF
）
Function
Interface
1/4 Inch
Screw Hole
T-Clamp
Screw Hole
T-Clamp
Screw Hole
Panning
Axis
Tilting Axis
3
2
Manual Version 1.0
1
1/4 Inch Screw Hole
Screws For
The Battery
Compartment
Video And Camera
Charging Interface
T-Clamp Screw Hole
Firmware Upgrade
Initialize The Gimbal
Video And Camera Charging Interface
Parameters
USB Cable
Function
Interface
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest firmware.
Unzip the compressed file locally to your computer. Refer to the connection diagram on how to connect the gimbal with the computer. Please
follow the instructions in the firmware upgrade package carefully, otherwise the Gimbal can not work normally.
Firmware Upgrade Instruction
!
Be sure to insert the
batteries before upgrading
WARNING
Make sure that the
connection to the
computer is done by the
!
USB Connector
Attention : Please make sure that the connection to the computer is done by the USB connector.
This interface can be output 5 voltage and receive
analog video signal from GoPro
Connect the video output and camera charging cable
as the above diagramcan power the GoPro camera and
view video signal from the GoPro camera.
Note: The Analog Monitor are equipped by users.
After connecting the video output and camera charging
cable, the analog monitor can be used as a display.
FY WG Mini 2-Axis Wearable Gimbal is a feature-rich camera stabilizer, yet lightweight and portable.
It is prohibited for any user to use the gimbal for any illegal purposes.
Guilin Feiyu Electronic Technology Co.,Ltd and our associates assume no liability for any accident, injury, death,
loss, or other claim related to or resulting from the use of this product. In no event shall Guilin Feiyu Electronic
Technology Co.,Ltd and our associates be liable for incidental or consequential damages relating to or resulting
from the use of this product or any of its parts. Damage resulting from use, accident, or normal wear and tear is
not covered by our warranty. Guilin Feiyu Electronic Technology Co.,Ltd reserves the right to amend this manual
and the terms and conditions of this product at any time.
D I S C L A I M E R
A T T E N T I O N
Initialization Instructions
FY WG Mini needs to be initialized whenever the
following situations are observed after power on
1. Ensure gimbal is fully assembled and camera is installed properly.
2. Place the gimbal on a flat surface and keep it stationary.
3. Power on the Gimbal.
4. Wait for the gimbal to finish its initialization before resuming the
use of the gimbal.
1. The tilt angle is not leveled with the horizontal
surface.
2. When the gimbal is stationary, the camera
does not stay stationary.
▲ Please assemble the gimbal in accordance to the diagram provided.
▲ Please upgrade the firmware with the provided USB data cable and
USB connector.
▲ Please charge the battery with the provided battery charger.
▲ Please install the camera securely before powering on the gimbal.
Function
Interface
Video Output Cable
Analog Monitor
( Equipped By Users )
( Equipped By Users )
8
PC
5
7
6
Upgrade........
95 mm
66 mm
35.5 mm
90 mm
146.5g ( Without batteries & camera )
3°/S ~ 150°/S
Camera Maximum Thickness
31.7 mm ( Replaceable mounting bracket )
Camera Maximum Height
43.6 mm ( Replaceable mounting bracket )
Usage Time 3 ~ 4 Hours
320°
320°Vertical Tilting Angle
Horizontal Panning Angle
Panning Increments
Weight
Motionless Flat Surface

Produkt Specifikationer

Mærke: FeiyuTech
Kategori: Ikke kategoriseret
Model: WG Mini

Har du brug for hjælp?

Hvis du har brug for hjælp til FeiyuTech WG Mini stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret FeiyuTech Manualer

FeiyuTech

FeiyuTech G4 Plus Manual

26 December 2024
FeiyuTech

FeiyuTech WG Mini Manual

26 December 2024
FeiyuTech

FeiyuTech AK4000 Manual

26 December 2024
FeiyuTech

FeiyuTech 3 Axis Handheld Gimbal Manual

26 December 2024
FeiyuTech

FeiyuTech MG Lite Manual

1 September 2024
FeiyuTech

FeiyuTech G4S Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vivax

Vivax MF-45E Manual

12 September 2025
Havis

Havis C-HDM-176 Manual

12 September 2025
Lanaform

Lanaform Tactile Mirror x7 Manual

12 September 2025
Hurricane

Hurricane HVL-E 1200-31 Manual

12 September 2025
Novation

Novation Nova Laptop Manual

12 September 2025
Parisot

Parisot Alice 2296CO3T Manual

12 September 2025
Lanaform

Lanaform Pulse Oximeter Manual

12 September 2025
Hurricane

Hurricane HEV-E 1200-31 Manual

12 September 2025
Havis

Havis UT-1003-KIT Manual

12 September 2025
Altrad

Altrad BELLE RTX 66 Manual

12 September 2025