Model P-20
CAPABILITIES
Will shred: Paper only
Will not shred: Continuous forms, adhesive labels, transparencies,
newspaper, cardboard, paper clips, laminates or plastic other than
noted above
Paper shred size:
Strip-Cut 7mm ...........................................................................................
Maximum:
Sheets per pass (Cross-Cut) ................................................................... 5*
Paper entry width .........................................................................220mm
*70g A4 paper at 220-240v, 50Hz, 0.6Amps; heavier paper, humidity or other
than rated voltage may reduce capacity. Recommended daily usage rates:
10-20 paper passes.
2
Paper entry
See safety instructions belowShredder head
Bin
SET-UP
Sheet capacity icon
Place shredder head securely on top of bin.
Control switch
Auto-On (I)
Off (O)
Reverse (R)
IMPORTANT SAFETY INSTRUCTIONS – Read Before Using!
• Keepawayfromchildrenandpets.Keephandsawayfrom
paper entry. Always set to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–
awayfromshredderopenings.Ifobjectenterstopopening,
switchtoReverse(R)tobackoutobject.
• Never use aerosol products, petroleum based lubricants or other
flammable products on or near shredder. Do not use canned air
on shredder.
• Donotuseifdamagedordefective.Donotdisassemble
shredder. Do not place near or over heat source or water.
• Operation,maintenance,andservicerequirementsare
covered in the instruction manual. Read the entire instruction
manual before operating shredders.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Donotputforeignobjectsinpaperentry.
• Shreddermustbepluggedintoawalloutletorsocketofthe
voltage and amperage designated on the label. The outlet
orsocketmustbeinstalledneartheequipmentandeasily
accessible.Energyconverters,transformers,orextension
cords should not be used with this product.
• FIREHAZARD–DoNOTshredgreetingcardswithsound
chips or batteries.
• Forindooruseonly.
5