Festo CMCB-D1-CC-S1 Manual

Festo Ikke kategoriseret CMCB-D1-CC-S1

Læs gratis den danske manual til Festo CMCB-D1-CC-S1 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Festo CMCB-D1-CC-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Translation of the original instructions

1 Applicable documents

All available documents for the product www.festo.com/sp.è

Document Contents

Instruction manual YHBP-PLd-S Instruction manual assembly, installation, safety

relay unit

Circuit diagram1)2) product-specific circuit diagram

Datasheet2) product-specific technical data

Documentation for installed individual compon-

ents1)

appropriate individual contents

1) included in scope of delivery

2) available as download

Tab. 1 Documentation on the product

2 Safety

2.1 General safety instructions

– Only use the product in original status without unauthorised modifications.

– Only use the product if it is in perfect technical condition.

– Observe labelling on the product.

– Take into consideration the ambient conditions at the location of use.

– This product can generate high frequency malfunctions, which may make it

necessary to implement interference suppression measures in residential

areas.

– Prior to mounting, installation and maintenance work: Switch off power sup-

ply and secure it from being switched back on.

– Comply with the handling specifications for electrostatically sensitive devices.

2.2 Intended use

The control system is part of the balancer kit YHBP. It is used exclusively for con-

trolling and monitoring the pneumatic balancer.

2.3 Training of qualified personnel

Installation, commissioning, maintenance and disassembly should only be con-

ducted by qualified personnel. The specialized personnel must be familiar with

the installation and operation of electrical and pneumatic control systems.

3 Further information

– Accessories www.festo.com/catalogue.è

– Spare parts www.festo.com/spareparts.è

4 Service

Contact your regional Festo contact person if you have technical questions

èwww.festo.com.

5 Product overview

Function, structure, control elements and connections can be found in the

enclosed circuit diagram 1 Applicable documents.è

6 Assembly

6.1 Mounting with screws

Additional measures may be required to comply with the IP degree of protection.

1. Remove plastic plugs from the drill holes.

2. Select screws according to the mounting situation.

6.2 Mounting with wall mounting brackets

The use of the wall mounting brackets has no influence on the IP degree of protec-

tion if properly mounted.

1. Remove plastic plugs from the drill holes.

2. Install the wall mounting bracket in accordance with the assembly instruc-

tions 1 Applicable documents.è

3. Select screws according to the mounting situation.

7 Installation

• Observe the notes and data from the circuit diagram

è 1 Applicable documents.

Connection of electrical lines

All necessary connecting cables from the control system to the supplied compon-

ents of the balancer kit YHBP are already pre-assembled at the factory.

1. Connect all lines as per circuit diagram 1 Applicable documents.è

2. When feeding in the supply voltage, pay attention to the on-site back-up fuse.

NOTICE!

Unauthorised Access to the Device Can Cause Damage or Malfunction.

• When connecting the device to a network, protect the network from unauthor-

ised access.

Standards for security in information technology can be used for network pro-

tection measures,e.g. IEC62443, ISO/IEC27001.

Connection of digital inputs and outputs

Up to 8 inputs and 8 outputs can be connected using pre-assembled cables

è 1 Applicable documents.

8 Commissioning

NOTICE!

Material damage due to incorrect or incomplete installation.

The following conditions must be fulfilled for commissioning:

• The system must be fully assembled.

• The electrical installation must be complete and checked.

• The pneumatic installation must be complete and checked.

9 Maintenance

A daily functional test is recommended for preventive maintenance.

• Carry out maintenance work on the installed individual components in accord-

ance with the relevant documentation 1 Applicable documents.è

10 Repair

In the event of repair, contact the Festo repair service www.festo.com.è

11 Modification

Conversions of the control system are not permitted.

12 Disposal

ENVIRONMENT!

Send the packaging and product for environmentally sound recycling in accord-

ance with the current regulations www.festo.com/sp.è

13 Technical data

Failure to observe the technical data can cause damage to the product.

The technical data are included in various documents:

– General technical data www.festo.com/catalogue.è

– Special technical data in the circuit diagram 1 Applicable documents.è

8130773

CMCB-D1-CC-S1

Control System

8130773

2020-07

[8130775]

Operating instructions

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	CMCB-D1-CC-S1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo CMCB-D1-CC-S1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025