Festo CPX-EPFE-EV Manual


Læs gratis den danske manual til Festo CPX-EPFE-EV (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Festo CPX-EPFE-EV, eller vil du spørge andre brugere om produktet?

Side 1/2
1. Teileliste
1฀ Kontaktblech
2฀ Endplatte links
3฀ Endplatte rechts
4฀ CPX-Terminal
5฀ Kontaktscheibe
6฀ selbstschneidende
Kontaktschraube
inkl. Unterlegscheibe
7฀ 9 Kontaktanschlüsse
2. Montagehinweise
Bei Montage, des CPX-Terminals an ein geerdetes Maschinengestell oder
eine geerdete Hutschiene, stellen Sie mit dem Kontaktblech 1 eine nieder-
ohmige Verbindung zum Erdpotenzial her.
Bei CPX-Terminal mit Pneu-
matik.
Montieren Sie das Kon-
taktblech 1 an die End-
platte 2.
Bei CPX-Terminal ohne
Pneumatik.
Montieren Sie das Kon-
taktblech 1 an die End-
platte 2 oder an die End-
platte 3.
Hinweis
Bei Montage auf rechter Endplatte 3:
Verwenden Sie die Kontaktscheibe 5 sowie die Kontaktschraube 6
inkl. Unterlegscheibe aus der linken Endplatte 2, um eine sichere
Kontaktierung zu gehrleisten.
3. Montage
Drehen Sie die Schraube
6 heraus mit einem
TORX-Schraubendreher
T20.
Setzen Sie das Kontakt-
blech 1 ein.
Drehen Sie die Schraube
6 fest mit einem TORX-
Schraubendreher T20.
Beachten Sie das maximal
zulässige Anzugsdreh-
moment.
Stellen Sie eine nieder-
ohmige Verbindung her:
Bei Wandmontage mit M6-
Schrauben am Kontaktan-
schluss 7.
Bei Wandmontage mit M4-
Schrauben am Kontaktan-
schluss 8.
Bei Hutschienenmontage
am Kontaktanschluss 9
mit Befestigungsset
CPA-BG-NRH.
Hinweis
Beachten Sie die Angaben zur Erdung der gesamten Einheit in der Sys-
tembeschreibung P.BE-CPX-SYS-DE (Kapitel Installation).
Montageanleitung (de)
697 357 / 2005-08a
†‡
Erdungselement
CPX-EPFE-EV
538 892
Festo SE & Co. KG
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1
2
1
max. MA= 1 Nm ± 10 %
7
6
5
1
6
5
6
6
1
2
3
5
4
8
9
7
8
9
1. Parts list
1฀ Contact plate
2฀ End plate, left-hand
3฀ End plate, right-hand
4฀ CPX terminal
5฀ Contact disc
6฀ Self-tapping
contact screw
with washer
7฀ 9 Contact
connections
2. Mechanical connection
When fitting the CPX terminal on an earthed machine frame or an earthed
hat rail, use the contact plate 1 to create a low impedance connection to
the earth potential.
For CPX terminal with pneu-
matic system.
Fit the contact plate 1 on
end plate 2.
For CPX terminal without
pneumatic system.
Fit the contact plate 1 on
end plate 2 or end plate
3.
Note
When fitting on right-hand end plate 3:
Use the contact disc 5 and the contact screw 6 with washer from
the left-hand end plate 2 to guarantee secure contacting.
3. Fitting
Remove the screw 6 with
a TORX T20 screwdriver.
Mount the contact plate
1.
Tighten the screw 6 fest
with a TORX T20 screw-
driver.
Note the maximum per-
mitted tightening torque.
Create a low impedance
connection:
For fitting onto a wall with
M6 screws on contact
connection 7.
For fitting onto a wall with
M4 screws on contact
connection 8.
For fitting on a hat rail on
contact connection 9
with fastening set
CPA-BG-NRH.
Note
Observe the instructions for earthing the entire unit in user manual
P.BE-CPX-SYS-EN (chapter on installation).
Assembly instructions (en)
697 357 / 2005-08a
†‡
Earthing component
CPX-EPFE-EV
538 892
Festo SE & Co. KG
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1
2
1
max. MA= 1 Nm ± 10 %
7
6
5
1
6
5
6
6
1
2
3
5
4
8
9
7
8
9


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: CPX-EPFE-EV

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo CPX-EPFE-EV stil et spørgsmål nedenfor, og andre brugere vil svare dig