Festo DADP-TL-F3-32 Manual

Festo Ikke kategoriseret DADP-TL-F3-32

Læs gratis den danske manual til Festo DADP-TL-F3-32 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Festo DADP-TL-F3-32, eller vil du spørge andre brugere om produktet?

Side 1/1
Translation of the original instructions
© 2020 all rights reserved to & Co. KGFesto SE
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
Document Product Contents
Instructions Stopper cylinder DFST-32-...-G2 Operating
Tab. 1
2 Safety
2.1 Safety instructions
Only assemble the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended Use
Interlocking of the toggle lever on the stopper cylinder DFST-32 -...- G2.
3 Product overview
3.1 Product range overview
3.1.1 Scope of Delivery
1Screw (1x)
2Shaft (1x)
3Leg spring (1x)
4Locking pin (1x)
5Screw (1x)
Fig. 1
3.1.2 Not in Scope of Delivery
6Stopper cylinder (1x)
DFST-32-...-G2
Fig. 2
4 Mounting
4.1 Assembly
Fig. 3 Combine spring and locking pin
Position the leg spring and the locking pin together.3 4
ÄThe long shank [X] lies on the locking pin .4
Fig. 4 Lock the locking pin and leg spring
1. Position the leg spring and the locking pin together on the drilled3 4
hole[A].
2. Push the shaft through the drilled hole[B], the leg spring and the lock-2 3
ing pin into the hole[A].4
Fig. 5 Fasten shaft
Tighten the screw in the drilled hole[B]. Tightening torque:3Nm1
Fig. 6 Mount the stop
Tighten the screw in the drilled hole[C]. Tightening torque:3Nm5
Fig. 7 Test function
Press the toggle lever[D] upwards.
ÄThe locking pin clicks audibly into place.4
5 Disassembly
Disassembly is performed in the reverse order to assembly.
CAUTION!
Leg spring under tension
The leg spring can crush or scratch fingers and body parts during disassembly.
Use a tool to carefully release the tension of the leg spring.
8107277
DADP-TL-F3-32
Lever locking mechanism
8107277
2020-01
[8107279]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DADP-TL-F3-32

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DADP-TL-F3-32 stil et spørgsmål nedenfor, og andre brugere vil svare dig