Festo DARF-Q13-16-1 Manual

Festo Ikke kategoriseret DARF-Q13-16-1

Læs gratis den danske manual til Festo DARF-Q13-16-1 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Festo DARF-Q13-16-1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
DARF-Q13-...-1
Push-on flange
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8182529
2023-10
[8182531]
8182529
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Quarter turn actuatorDRRS –
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Before working on the product, switch off the compressed air supply and lock it
to prevent it from being switched on again.
2.2 Intended use
The push-on flange attaches the payload to the flange shaft of the
quarter turn actuator DRRS.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers. The qualified personnel have knowledge
and experience in dealing with pneumatic drives and pneumatic axes.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories and spare parts èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
Fig. 1: Scope of delivery
1
Screw (4x)
2
Push-on flange (1x)
3
Centring sleeve (2x)
4.2 Not in scope of delivery
4
Fig. 2: Not included in the scope of
delivery
4
Quarter turn actuator (1x)
DRRS
5 Assembly
3
4
2
Fig. 3: Positioning centring sleeves
The push-on flange[2] can be mounted with an offset of 90° on the flange shaft of
the quarter turn actuator[4].
1. Position the centring sleeves[3].
2. Position the push-on flange[2] centrally.
1
2
Fig. 4: Mounting push-on flange
• Mount the push-on flange[2] with the screws[1]. Observe tightening torque.
DARF-Q13-...-1 -12 -16 -20 -25
Screw M3x8 M4x10 M4x12 M5x12
Tightening torque [Nm] 1.2±20% 2.3±20% 3.2±25% 5.6±25%

Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DARF-Q13-16-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DARF-Q13-16-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Festo Manualer

Festo

Festo KYC-63 Manual

9 Juli 2025
Festo

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025
Festo

Festo CPX-E-8DO Manual

8 Juli 2025
Festo

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025
Festo

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025
Festo

Festo CPV-SC-FB-VI Manual

7 Juli 2025
Festo

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025
Festo

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025
Festo

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025
Festo

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Microchip

Microchip ATTINY861 Manual

19 Juli 2025
Husqvarna

Husqvarna Aspire P4A 18-C100 Manual

19 Juli 2025
Ikea

Ikea TJUSIG 201.526.34 Manual

19 Juli 2025
Atlona

Atlona AT-VGW-250 Manual

19 Juli 2025
Sharkoon

Sharkoon MK3 Manual

19 Juli 2025
Yamaha

Yamaha WaveRunner FX SVHO (2025) Manual

19 Juli 2025
Fuxtec

Fuxtec FX-GS36S Manual

19 Juli 2025
Bartscher

Bartscher 3L-1 Manual

19 Juli 2025
Guede

Guede GF 3060.1 Manual

19 Juli 2025
ChamSys

ChamSys GeNetix GD10 Manual

19 Juli 2025