Festo DARF-Q13-20-1 Manual

Festo Ikke kategoriseret DARF-Q13-20-1

Læs gratis den danske manual til Festo DARF-Q13-20-1 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Festo DARF-Q13-20-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

DARF-Q13-...-1

Push-on flange

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8182529

2023-10

[8182531]

8182529

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product Content

Operating instruction Quarter turn actuatorDRRS –

Tab. 1:

Applicable documents

2 Safety

2.1 Safety instructions

–Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

2.2

Intended use

The push-on flange attaches the payload to the flange shaft of the

quarter turn actuator DRRS.

2.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have knowledge

and experience in dealing with pneumatic drives and pneumatic axes.

Additional information

–Contact the regional Festo contact if you have technical problems

www.festo.com.

–Accessories and spare parts

www.festo.com/catalogue.

4 Product Range Overview

4.1 Scope of delivery

Fig. 1:

Scope of delivery

Screw (4x)

Push-on flange (1x)

Centring sleeve (2x)

4.2

Not in scope of delivery

Fig. 2:

Not included in the scope of

delivery

Quarter turn actuator (1x)

DRRS

Assembly

Fig. 3: Positioning centring sleeves

The push-on flange[2] can be mounted with an offset of 90° on the flange shaft of

the quarter turn actuator[4].

Position the centring sleeves[3].

Position the push-on flange[2] centrally.

Fig. 4:

Mounting push-on flange

• Mount the push-on flange[2] with the screws[1]. Observe tightening torque.

DARF-Q13-...-1 -12 -16 -20 -25

Screw M3x8 M4x10 M4x12 M5x12

Tightening torque [Nm] 1.2±20% 2.3±20% 3.2±25% 5.6±25%

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	DARF-Q13-20-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DARF-Q13-20-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Nokia CH-100 Manual

17 December 2025

Miele DKF 31-S Manual

17 December 2025

Aqprox appLS24 Manual

17 December 2025

Vaxcel T0440 Manual

17 December 2025

Georgia Pacific enMotion 59466A Manual

17 December 2025

Wine-Mate WM-8500SSDWC Manual

17 December 2025

TOTO TSU08W Manual

17 December 2025

Vaxcel T0702 Manual

17 December 2025

Wine-Mate WM-6500SSD Manual

17 December 2025

Wine-Mate WM-2500SSVWC Manual

17 December 2025