Festo EAHF-L2-45-P-S Manual

Festo Ikke kategoriseret EAHF-L2-45-P-S

Læs gratis den danske manual til Festo EAHF-L2-45-P-S (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Festo EAHF-L2-45-P-S, eller vil du spørge andre brugere om produktet?

Side 1/1
EAHF-L2-...-P-S
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8179869
2023-10c
[8179871]
8179869
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
User documentation Actuator Assembly2
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The profile mounting fastens an actuator to a mounting surface via the basic2
profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
Fig.1
1
Profile mounting (2x)
4.2 Not in scope of delivery
3
2
Fig.2
2
Actuator (1x):
Axis ELGC, ELFC;
Axis unit ELGS;
Mini slide EGSC;
Mini slide unit EGSS;
Quarter turn actuator DRRS;
Cylinder EPCC;
Cylinder unit EPCE, EPCS
3
Screw (2x)
5 Assembly
Fig. 3: Determine support spacings L and mounting points
Determine the required support spacingsL and mounting points of the
actuator Other applicable documents.è
1
A
2
B
Fig. 4: Positioning profile mountings
Position profile mountings at the support points of the actuator .1 2
ÄThe lug(A) is in slot(B).
1
3
Fig. 5: Mounting actuator
1. Select the screws suitable for the installation situation.3
2. Fasten the profile mountings on the mounting surface with screws .1 3
Observe maximum tightening torque.
EAHF-L2-...-P-S -25 -45
3Screw M4 M5
Max. tightening torque [Nm] 2.4 4.8
3. Repeat the mounting steps for all mounting points.


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAHF-L2-45-P-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHF-L2-45-P-S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo

Kimo LR 110 Manual

2 September 2025
HMS Premium

HMS Premium LPD02 Manual

2 September 2025
AVer

AVer E1008 Manual

2 September 2025
Biltema

Biltema 17-547 Manual

2 September 2025
Groen

Groen AH/1E Manual

2 September 2025
ACOPower

ACOPower HY-P30 Manual

2 September 2025
Globe

Globe RG30 Manual

2 September 2025
Neutrik

Neutrik NLT4FXX Manual

2 September 2025