Festo EAHT-E9-FB-3D-30 Manual

Festo Ikke kategoriseret EAHT-E9-FB-3D-30

Læs gratis den danske manual til Festo EAHT-E9-FB-3D-30 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Festo EAHT-E9-FB-3D-30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Assembly instructions (Original instructions)

8079181

2017-09a

[8079183]

†‡

Mounting kit

EAHT-E9-FB-3D-30

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

1. Further applicable documents

All available documents for the product  www.festo.com/pk

Observe further applicable documents:

 Description of the planar surface gantry 4 and actuator 5

 Assembly instructions of profile mounting attachment 6 and

connection kit 7

2. Safety

Switch off power supply before mounting work.

Comply with tightening torques ( Table).

3. Intended use

Mounting of a Z-axis 5 to the Y-axis of the planar surface gantry 4.

4. Additional information

Centring sleeve (B)  www.festo.de/catalogue

5. Scope of delivery

2227

6d_1 1 Mounting kit

2 Screw

3 Cylindrical

dowel pin

(1x)

(2x)

6. Not in scope of delivery

2227

6d_2 4 Planar surface

gantry

EXCM-30

(1x)

2227

6d_3 5 Z-axis1)

DGSL-8/-10/-12

EGSC-25/-32

EGSK-20/-26

EGSL-35

(1x)

2227

6d_4 6 Profile mounting

attachment

EAHF-L2-25-P

7 Connection kit

EAHT-AE-3D

(1x)

7. Mounting

7a. Interface to planar surface gantry 4

22276d_5

Place the mounting kit 1

with cylindrical dowel

pins 3 at slide unit (A)

of the Y-axis of the planar

surface gantry 4.

Tighten the screws 2.

7b. Interfaces of Z axis 5

Mounting components and tightening torques ( Table).

For DGSL-8/-10

22276d_6

Position centring sleeves (B).

Position of Z-axis 5 1 on the mounting kit .

Tighten the screws (C).

For DGSL-12

22276d_7

Position centring sleeves (B).

Position of Z-axis 5 1 on the mounting kit .

Tighten the screws (C).

1 2

1) Mounting components are not included in the scope of delivery of Z-axis 5.

2) In case of EGCS-25/-32 with a stroke of 25, mounting is not possible.

For EGSC-25

22276d_13

Place the profile mounting attachments 6 along the Z-axis 5 ( Further

applicable documents).

Position of Z-axis 5 1 on the mounting kit .

Mount the profile mounting attachments 6 to the mounting kit 1 with

the screws (C).

For EGSC-32

22276d_12

Place the profile mounting attachments 6 along the Z-axis 5 ( Further

applicable documents).

Position of Z-axis 5 1 on the mounting kit .

Mount the profile mounting attachments 6 to the mounting kit 1 with

the screws (C).

For EGSK-20

22276d_9

Position of Z-axis 5 1 on the mounting kit .

Tighten the screws (C).

3) Tolerances for tightening torques MA without specification of tolerance

MA = 1.2 Nm: ± 10 %

MA , 1.2 Nm: ± 20 %

For EGSK-26

22276d_10

Position of Z-axis 5 1 on the mounting kit .

Tighten the screws (C).

For EGSL-35

22276d_8

Position centring sleeves (B).

Position of Z-axis 5 1 on the mounting kit .

Tighten the screws (C).

7c. Interface to connection kit 7

2227

6d_1

Observe assembly

instructions for connection

kit 7 ( Further applicable

documents).

8. Screw sizes and tightening torques M

EAHT-E9- 2

22 [Nm]

FB-3D-30 M4x10 2.5

Not in scope of delivery:

Z-axis 5

55 Centring sleeve (B) (C) Screw ISO 4762 [Nm]

DGSL-8/-10 ZBH-7 (2x) M4x10-8.8 (2x) 2.0

DGSL-12 ZBH-7 (2x) M5x12-8.8 (2x) 3.0

EGSC-25/-32 – – M4x8-8.8 (4x) 2.0

EGSK-20 – – M3x6-8.8 (4x) 1.2

EGSK-26 – – M4x6-8.8 (4x) 2.5

EGSL-35 ZBH-7 (2x) M4x12-8.8 (4x) 2.5

9. Prior to commissioning

Note

Collision!

The mounting kit reduces the available Y-stroke of the planar surface

gantry 4 by 16 mm.

Check Z-axis 5 for collision.

Set the end stops of the Y-axis at the planar surface gantry 4 ( Further

applicable documents).

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	EAHT-E9-FB-3D-30

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHT-E9-FB-3D-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025