Festo EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA Manual

Festo Ikke kategoriseret EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA

Læs gratis den danske manual til Festo EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Festo EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

EGSS-BS

Mini slide unit

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Operating instruction

8199414

2023-11e

[8199416]

8199414

Translation of the original instructions

IO-Link is a registered trademark of its respective trademark holder in certain

countries.

Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product

Operating instruction Integrated drive EMCS-ST

Operating instruction Mini slide EGSC

Assembly instructions Axial kit EAMM-A

Assembly instructions Parallel kit EAMM-U

Assembly instructions Adapter NEFC-M12G8-0.3-M12G5-LK

Tab. 1:

Applicable documents for the product

2 Product version

This documentation refers to the following datasets:

–

Hardware version of the integrated drive up to "Rev02" or "RevB"

–Firmware version of the integrated drive from "v19.0.4.107_release"

–

IO-Link device description file (IODD) from V1.2.6

–Adapter NEFC from production date 01/2022

When using a different firmware version, check whether a corresponding version

of the documentation is available

www.festo.com/sp.

Safety

3.1

Safety instructions

–Observe the identifications on the product.

–

Before working on the product, switch off the power supply and secure it

against being switched on again.

–

Store the product in a cool, dry environment protected from UV and corrosion.

Keep storage times short.

–Observe the tightening torques. Unless otherwise specified, the tolerance is

±20%.

3.2

Intended use

The mini slide unit EGSS positions payloads between two end positions.

The mini slide unit EGSS is approved for slide operation.

Fig. 1:

Slide operation

3.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have knowledge

and experience in dealing with electric drive systems.

4 Additional information

–Contact the regional Festo contact if you have technical problems

www.festo.com.

–Accessories and spare parts

www.festo.com/catalogue.

5 Product overview

5.1 Scope of delivery

The following components are included in the scope of delivery:

–Mini slide unit EGSS

–Operating instructions for mini slide unit EGSS

–Adapter for IO-Link operation (optional accessory)

www.festo.com/catalogue

5.2

System overview

Fig. 2: System overview EGSS-BS,

example with axial kit

PELV fixed power supply for load

voltage

PELV fixed power supply for logic

voltage

Application software

PC or laptop

Controller or IO-Link master

Mini slide unit EGSS-BS

5.2.1 Product design

1 2 3 4 5 6 7

Fig. 3:

Product design EGSS-BS,

example with axial kit

Mini slide EGSC-BS

Sealing air connection with filter

element

Axial kit EAMM-A

Product labelling

Integrated drive EMCS-ST

Controller housing

Warning symbol "Attention! Hot

surface"

Electrical connections, display elements and HMI control elements

1 2 3 4 5

Fig. 4:

Electrical connections, display

elements and HMI control

elements

LED display menu (Speed Out, ...,

Demo)

LED parameter display

LED C/Q

Load voltage connection [Power]

Logic voltage connection and dig-

ital I/O or IO-Link connections

[Logic]

Pushbutton actuator (right arrow)

Pushbutton actuator (Edit)

Pushbutton actuator (left arrow)

5.3 Function

The mini slide unit converts the rotary motion of the mounted motor into a linear

motion of the slide. The screw drive converts the torque of the motor into a feed

force. The linear movement of the slide is precisely guided by the guide.

Transport

NOTICE

Unexpected and unbraked movement of components

• Secure moving components for transport.

1. Take product weight into account

14 Technical data.

2. Maintain support clearance 300mm when attaching transportation aids.£

Mounting

WARNING

Risk of injury due to unexpected movement of components.

The drive can move freely in the voltage-free state. This can cause unexpected

movements of the connected mechanics and crush parts of the body.

•

Bring moving parts of the mechanical system into a safe position.

•

Mounting product Operating instructions for mini slide EGSC.è

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025

Festo VABD-S2-1-S-C Manual

20 August 2025

Festo SIED-M18B-ZO-S-L Manual

19 August 2025

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025

Festo P.BE-CP-CO-DE Manual

19 August 2025

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hendi 551813 Manual

2 November 2025

BougeRV E50 Manual

2 November 2025

Beverage-Air VueMax VMHC-7-1-G Manual

2 November 2025

OneConcept Magic-Carpet DX Manual

2 November 2025

Tonor T20 Manual

2 November 2025

Beverage-Air Horizon HRP3HC-1HS Manual

2 November 2025

Workzone AB1600 Manual

2 November 2025

Homedics BH-100-AU Manual

2 November 2025

Beverage-Air Horizon HFP1HC-1S Manual

2 November 2025

Beverage-Air VueMax VMHCSL-18-1-B Manual

2 November 2025