Festo NEBL-M8G4-E-0.5-N-M8G4 Manual

Festo Ikke kategoriseret NEBL-M8G4-E-0.5-N-M8G4

Læs gratis den danske manual til Festo NEBL-M8G4-E-0.5-N-M8G4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Festo NEBL-M8G4-E-0.5-N-M8G4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NEBL-M8...4-E-...-M8...4

Connecting cable

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8168744

2022-02b

[8168746]

Translation of the original instructions

Applicable documents

All available documents for the product

www.festo.com/sp.

2 Safety

2.1 Safety instructions

–

Do not connect or disconnect the push-in connector while the voltage is live.

–Only mount the product on components that are in a condition to be safely

operated.

2.2 Intended use

Connecting cable for the power supply for applications with which a low voltage

drop is required, including for longer cables, e.g. for CPX-AP.

Structure

3.1 Product design

1 23

Fig. 1:

NEBL-M8G4-E-...-M8G4

Socket M8x1, A-coded

Plug M8x1, A-coded

Cable

1 23

Fig. 2:

NEBL-M8W4-E-...-M8W4

Socket M8x1, A-coded

Plug M8x1, A-coded

Cable

3.2 Contact assignment

Electrical connection 1

Field device side

Electrical connection 2

Controller side

Socket

Pin Pin 2

Plug con-

nector

1 1

2 2

3 3

4 4

Tab. 1:

Contact assignment

Assembly

4.1 Application of assembly tools

•

Use only a suitable tool with torque function for the screw-type lock with

hexagon and longitudinal knurl.

4.2 Mounting electrical connection 1

1. Align the socket to fit the plug.1

Connect the socket to the plug.1

3. Tighten the screw-type lock of the socket . Tightening torque:1

0.2 Nm ± 50%

4.3 Mounting electrical connection 2

1. Align the plug to match the socket.2

2. Insert the plug into the socket.2

3. Tighten the screw-type lock of the plug . Tightening torque: 0.2 Nm ± 50% 2

4.4 Wiring

Feature Cable characteristic Wiring

-E Suitable for energy chains in energy chain or flexible

Tab. 2: Wiring

4.5 Strain relief

Strain relief for movable wiring

• Install the strain reliefs and mountings over a wide area to prevent damage to

the internal structure and outer cover.

4.6 Mounting in energy chain

1. Lay out the energy chain lengthways.

Place the cables in the energy chain without twisting them.

3. Separate cables from each other using separators/drilled holes.

4. Do not bind cables in bundles.

5. Maintain space X. X 10% of the cable diameter D.>

With the energy chain hanging vertically: increase the space X.

Align the energy chain in the working position:

–

Make sure that the radius is greater than the bending radius R of the

cables.

–

The cables can move freely in the bending radius KR of the energy chain.

The cable movement is not forced by the energy chain.

Mount the energy chain corresponding instruction manual.è

Fasten the cables:

–for short energy chains with a length 1 m at both ends of the energy chain<

–for long sliding energy chains with a length 1 m at the driver end only>

Do not move cables all the way to the fastening point.

The mounting space A between the fastening point and bending move-

ment is maintained.

NOTICE

Damage to cables if the chain breaks.

• Replace cables after a chain break.

NOTICE

Malfunction and material damage due to vertically suspended cables.

The cables stretch.

• Regularly check the length of the cables.

•

Readjust the cables if required.

5 Technical data

NEBL-M8...4-E-...-M8...4

Cable characteristic Suitable for energy chains

Cable composition [mm²] 4x0.5

Shielding no

Cable diameter D [mm] 4.8

Mounting space A [mm] 96³

Current rating at 40 °C [A] 5.2

Surge resistance [kV] 0.8

Operating voltage range

AC U

[V] 0 … 30

DC U

[V] 0 … 30

Bending radius

Fixed cable installation R [mm] 15³

Flexible cable installation R [mm] 50³

Ambient temperature

Fixed cable installation [°C] –40 … +90

Note on the ambient temperature

with fixed cable installation

[°C] –40 … +75 for UL applications

Flexible cable installation [°C] –20 … +90

Note on the ambient temperature

with movable cable installation

[°C] –20 … +75 for UL applications

Material

Cable sheath TPE-U(PUR)

Insulating sheath PP

Electrical connection 1

Function Field device side

Connection type Socket

Connection technology M8x1 A-coded to EN 61076-2-104

Type of mounting Screw-type lock with hexagon 9 and longitu-ß

dinal knurl

Degree of protection IP65, IP67, IP69K In assembled state

Electrical connection 2

Function Controller side

Connection type Plug connector

Connection technology M8x1 A-coded to EN 61076-2-104

Type of mounting Screw-type lock with hexagon 9 and longitu-ß

dinal knurl

Degree of protection IP65, IP68, IP69K In assembled state

Tab. 3: Technical data

Produkt Specifikationer

Mærke:	Festo
Kategori:	Ikke kategoriseret
Model:	NEBL-M8G4-E-0.5-N-M8G4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo NEBL-M8G4-E-0.5-N-M8G4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Festo Manualer

Festo KYC-63 Manual

9 Juli 2025

Festo NEBM-L10G14-EH-5-Q7N-LE12 Manual

8 Juli 2025

Festo CPX-E-8DO Manual

8 Juli 2025

Festo CRDSNU-20-80-P-A Manual

8 Juli 2025

Festo CRDSNU-16-10-P-A Manual

8 Juli 2025

Festo CPV-SC-FB-VI Manual

7 Juli 2025

Festo CRDSNU-B-16-50-P-A-MG-A1 Manual

7 Juli 2025

Festo NEBM-L10G14-EH-10-Q7N-LE12 Manual

7 Juli 2025

Festo CPX-CTEL-4-M12-5POL Manual

7 Juli 2025

Festo CRDSNU-B-25-25-PPS-A-MG-A1 Manual

7 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Biltema 18-688 Manual

11 Juli 2025

Segway Ninebot KickScooter F40D II Manual

11 Juli 2025

Microchip MCP48FVB08 Manual

11 Juli 2025

Pulsar AWO654 Manual

11 Juli 2025

Unitech MS282 Manual

11 Juli 2025

Oladance OWS Sports Manual

11 Juli 2025

Nivian NVS-S7B Manual

11 Juli 2025

Danfoss DST X510 Manual

11 Juli 2025

Danfoss PVED-CC Manual

11 Juli 2025

Miniland NaturRound Bunny 89272 Manual

11 Juli 2025