Festo NEBL-T12W4-E-2-N-LE4 Manual

Festo Ikke kategoriseret NEBL-T12W4-E-2-N-LE4

Læs gratis den danske manual til Festo NEBL-T12W4-E-2-N-LE4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Festo NEBL-T12W4-E-2-N-LE4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
6.
8.
NEBL-T12...4-E-...-LE4
Connecting cable
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
Assembly instructions
8187643
2023-03a
[8187645]
8187643
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1
Applicable documents
All available documents for the product
è
www.festo.com/sp.
2 Safety
2.1
Safety instructions
–Do not connect or disconnect the push-in connector while the voltage is live.
–
Do not wire or disconnect an open cable end when powered.
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The connecting cable connects electric drives to the power supply at the M12T-
coded plug.
2.3
Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers. The qualified personnel are trained in
electrical engineering.
3 Additional information
–
Accessories
è
www.festo.com/catalogue.
4 Structure
4.1
1 23
Fig. 1:
NEBL-T12G4-E-...-LE4
1
Socket M12x1, T-coded
2
Core (4x)
3
Cable
1 23
Fig. 2:
NEBL-T12W4-E-...-LE4
1
Socket M12x1, T-coded
2
Core (4x)
3
Cable
4.2 Contact assignment
Electrical connection1
Field device side
Insulated wire
1)
Electrical connection2
Controller side
1 BN Open end
2 WH
3 BU
4 BK
1)
Colour code in accordance with IEC 60757:2021-06
Tab. 1: Contact assignment
5 Assembly
5.1 Assembly, field device side
1. Align the socket to fit the plug.1
2. Connect the socket to the plug.1
3. Tighten the screw-type lock of the socket . Tightening1
torque:0.4Nm±55%
5.2
Assembly, controller side
1. Strip and assemble the cable sheath and insulated wires as required.
2.
Connect the insulated wires in accordance with the contact assignment.
5.3
Wiring
Character-
istic
Cable characteristic Wiring
-E Suitable for energy chains In energy chain or flexible
Tab. 2: Wiring
5.4
Strain relief
Strain relief for movable wiring:
• Fix the cable sheath in the area of the wire ends.
Ä
The insulated wires must not be subjected to force.
5.5
Mounting in energy chain
1. Lay out the energy chain lengthways.
2. Place the cables in the energy chain without twisting them.
3. Separate cables from each other using separators/drilled holes.
4.
Do not bind cables in bundles.
5.
Maintain spaceX. X 10%of the cable diameterD.>
With the energy chain hanging vertically: increase the spaceX.
Align the energy chain in the working position:
–Make sure that the radius is greater than the bending radiusR of the
cables.
–The cables can move freely in the bending radius KR of the energy chain.
Ä
The cable movement is not forced by the energy chain.
7.
Mount the energy chain corresponding instruction manual.è
Fasten the cables:
–
for short energy chains with a length 1m at both ends of the energy<
chain
–for long sliding energy chains with a length 1m at the driver end only>
9.
Do not move cables all the way to the fastening point.
Ä
The mounting spaceA between the fastening point and bending move-
ment is maintained.
NOTICE
Damage to cables if the chain breaks.
• Replace cables after a chain break.
NOTICE
Malfunction and material damage due to vertically suspended cables.
The cables stretch.
• Regularly check the length of the cables.
•
Readjust the cables if required.

Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: NEBL-T12W4-E-2-N-LE4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo NEBL-T12W4-E-2-N-LE4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Festo Manualer

Festo

Festo SIED-M18NB-ZS-S-L Manual

20 August 2025
Festo

Festo SOEG-RT-M12-PS-K-2L Manual

20 August 2025
Festo

Festo VABD-S2-1-S-C Manual

20 August 2025
Festo

Festo SIED-M18B-ZO-S-L Manual

19 August 2025
Festo

Festo VACC-S18-120-K4-27-KS4ME Manual

19 August 2025
Festo

Festo VABS-S4-1S-G14-K2 Manual

19 August 2025
Festo

Festo P.BE-CP-CO-DE Manual

19 August 2025
Festo

Festo VABS-S4-2S-G18-B-K2 Manual

19 August 2025
Festo

Festo P.BE-CP-FB5-E-FR Manual

19 August 2025
Festo

Festo P.BE-CP-DN-DE Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Physa

Physa TR-3 Manual

2 November 2025
Hendi

Hendi 270882 Manual

2 November 2025
Obsidian

Obsidian WP1CAT6 Manual

2 November 2025
ANCEL

ANCEL FX6100 Manual

2 November 2025
ANCEL

ANCEL BST600 Manual

2 November 2025
ANCEL

ANCEL AJ600 GDI Manual

2 November 2025
Bogen

Bogen ATP35 Manual

2 November 2025
ANCEL

ANCEL AJ600 Manual

2 November 2025
Arktic

Arktic 204986 Manual

2 November 2025
Beverage-Air

Beverage-Air Horizon HFP3HC-1G Manual

2 November 2025