
PLEASE READ ALL INFORMATION IN
THIS LEAFLET BEFORE PERFORMING
Do not use after the expiry date
stamped on the bottom of the carton.
Store in a dry place below 30ºC.
Keep out of reach of children.
Single use device. Do not reuse.
For in-vitro diagnostic use.
(Not to be taken internally).
1. Fill the cup provided with urine.
2. Remove the test strip from the foil
3. Hold the Dipping End of the strip in
the cup of urine for 10 seconds only.
The urine level should not be
higher than the maximum level
line printed on the strip.
4. Remove the strip and place on a
flat non-absorbent surface, with
the printed side facing up.
5. You should see a pale pink line in
the Result Window. This indicates
the test is working. The results
should be visible in about 2-5 minutes.
Result Window means you are likely to
be pregnant. One line may be lighter than
the other, they do not have to match.
appearance of one pink line
in the Result Window means you are likely
Invalid - If no line appears
in the Result Window after
5 minutes, the result is invalid and you
should repeat the test with another
First Response™ Pregnancy Test, ensuring
instructions are followed carefully.
pregnancy test works . . .
The First Response™ Pregnancy Test
detects the pregnancy hormone called hCG
(human chorionic gonadotropin) in
your urine. The amount of pregnancy
hormone in your body increases during the
first three months of pregnancy.
The First Response™ Pregnancy Test is so
sensitive that there is usually enough hCG
to be detected as early as the first day of
DIP & READ PREGNANCY TEST
Place test strip in cup with urine
In as little as 2 minutes.
(Mon to Fri 8.30am - 5.00pm AEST)